Loading...

Follow Nath042 on Feedspot

Continue with Google
Continue with Facebook
or

Valid

In our 3DPRINTING series, we create videos regarding 3D printing. These videos are here specifically to help the basic, intermediate or even Advanced user improve their 3D printing. If you are into 3D printing this series is aimed towards you. We are hoping to teach, learn, experiment and review. This means getting new printers to try and review, along with filament. Also to bring about new ways in which to do things such as bed levelling, modelling and small tips and tricks that can make a huge difference in the way that you print.

Thanks a lot for watching please check out the links below, help me grow and support me if possible via spreading the word. You can also support me by donating to me on Patreon, watching the adverts, or using affiliate links when possible. Thanks for reading!

Important Links
Twitter: https://twitter.com/nath042
Google+: https://plus.google.com/+nath042
Instagram: http://instagram.com/nath042
Facebook: https://www.facebook.com/nath042YT
Website: http://www.nath042.com/

++Check out this little tabletop project, called Vigor Quest (Project One)
http://nath042.com/vigor-quest

++Check out some creative merchandise
https://shop.spreadshirt.co.uk/Nath042

++Become a Patreon! Every dollar is appreciated!
https://www.patreon.com/nath042

++Purchase one of the printers I have!
Tivo Tarantula
https://www.gearbest.com/3d-printers-3d-printer-kits/pp_628790.html?lkid=11933848

Anet A8
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_343643.html?wid=1433363&lkid=14752943

CR 10
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_441282.html?wid=1433363&lkid=14753452

CR 10S
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_796478.html?wid=1433363&lkid=14753729

++A HUGE Special Thanks To Our Patreons for Helping to grow the channel!
Jamie Robinson

The post Prusa i3 MK3 A Month Later! | #3DPRINTING appeared first on Nath042.

Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

Thanks a lot for watching please check out the links below, help me grow and support me if possible via spreading the word. You can also support me by donating to me on Patreon, watching the adverts, or using affiliate links when possible. Thanks for reading!

Important Links
Twitter: https://twitter.com/nath042
Google+: https://plus.google.com/+nath042
Instagram: http://instagram.com/nath042
Facebook: https://www.facebook.com/nath042YT
Website: http://www.nath042.com/

++Check out this little tabletop project, called Vigor Quest (Project One)
http://nath042.com/vigor-quest

++Check out some creative merchandise
https://shop.spreadshirt.co.uk/Nath042

++Become a Patreon! Every dollar is appreciated!
https://www.patreon.com/nath042

++Purchase one of the printers I have!
Tivo Tarantula
https://www.gearbest.com/3d-printers-3d-printer-kits/pp_628790.html?lkid=11933848

Anet A8
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_343643.html?wid=1433363&lkid=14752943

CR 10
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_441282.html?wid=1433363&lkid=14753452

CR 10S
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_796478.html?wid=1433363&lkid=14753729

++A HUGE Special Thanks To Our Patreons for Helping to grow the channel!
Jamie Robinson

The post Designing The Rats for Vigor Quest PT2 | #3DPROJECT appeared first on Nath042.

Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

Thanks a lot for watching please check out the links below, help me grow and support me if possible via spreading the word. You can also support me by donating to me on Patreon, watching the adverts, or using affiliate links when possible. Thanks for reading!

Important Links
Twitter: https://twitter.com/nath042
Google+: https://plus.google.com/+nath042
Instagram: http://instagram.com/nath042
Facebook: https://www.facebook.com/nath042YT
Website: http://www.nath042.com/

++Check out this little tabletop project, called Vigor Quest (Project One)
http://nath042.com/vigor-quest

++Check out some creative merchandise
https://shop.spreadshirt.co.uk/Nath042

++Become a Patreon! Every dollar is appreciated!
https://www.patreon.com/nath042

++Purchase one of the printers I have!
Tivo Tarantula
https://www.gearbest.com/3d-printers-3d-printer-kits/pp_628790.html?lkid=11933848

Anet A8
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_343643.html?wid=1433363&lkid=14752943

CR 10
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_441282.html?wid=1433363&lkid=14753452

CR 10S
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_796478.html?wid=1433363&lkid=14753729

++A HUGE Special Thanks To Our Patreons for Helping to grow the channel!
Jamie Robinson

The post Designing The Rats for Vigor Quest | #3DPROJECT appeared first on Nath042.

Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

Thing: https://www.thingiverse.com/thing:2964977
My Blank Lid: https://www.thingiverse.com/thing:3057435

See the below for the materials I purchased to make this possible, the dice are really nice and have good weight, the magnets are super strong and fit perfectly and the red felt, is good, its just a shame I didn’t cut it too well. The links below are an affiliate, so any purchases made may provide me with some type of reward.

Dice: https://amzn.to/2NeURES
Magnets: https://amzn.to/2PyQXEj
Red Felt: https://amzn.to/2CflvJA

3D Showcase is a series where nath042 tries to get cool items and tools found on the internet in front of people who may have not even known they were there. If you would be interested in seeing more like this please do not hesitate to subscribe and share. If you find any more models like this please do not hesitate to leave a link to it in the youtube comments section or in the blog comments below. It would mean a lot if you can share this with your friends who would be interested and help me grow. Until next time!

Thanks a lot for watching please check out the links below, help me grow and support me if possible via spreading the word. You can also support me by donating to me on Patreon, watching the adverts, or using affiliate links when possible. Thanks for reading!

Important Links
Twitter: https://twitter.com/nath042
Google+: https://plus.google.com/+nath042
Instagram: http://instagram.com/nath042
Facebook: https://www.facebook.com/nath042YT
Website: http://www.nath042.com/

++Check out this little tabletop project, called Vigor Quest (Project One)
http://nath042.com/vigor-quest

++Check out some creative merchandise
https://shop.spreadshirt.co.uk/Nath042

++Become a Patreon! Every dollar is appreciated!
https://www.patreon.com/nath042

++Purchase one of the printers I have!
Tivo Tarantula
https://www.gearbest.com/3d-printers-3d-printer-kits/pp_628790.html?lkid=11933848

Anet A8
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_343643.html?wid=1433363&lkid=14752943

CR 10
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_441282.html?wid=1433363&lkid=14753452

CR 10S
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_796478.html?wid=1433363&lkid=14753729

++A HUGE Special Thanks To Our Patreons for Helping to grow the channel!
Jamie Robinson

The post INCREDIBLE 3D PRINTED Dice Pot (Must watch) | #3DSHOWCASE appeared first on Nath042.

Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

Thanks a lot for watching please check out the links below, help me grow and support me if possible via spreading the word. You can also support me by donating to me on Patreon, watching the adverts, or using affiliate links when possible. Thanks for reading!

Important Links
Twitter: https://twitter.com/nath042
Google+: https://plus.google.com/+nath042
Instagram: http://instagram.com/nath042
Facebook: https://www.facebook.com/nath042YT
Website: http://www.nath042.com/

++Check out this little tabletop project, called Vigor Quest (Project One)
http://nath042.com/vigor-quest

++Check out some creative merchandise
https://shop.spreadshirt.co.uk/Nath042

++Become a Patreon! Every dollar is appreciated!
https://www.patreon.com/nath042

++Purchase one of the printers I have!
Tivo Tarantula
https://www.gearbest.com/3d-printers-3d-printer-kits/pp_628790.html?lkid=11933848

Anet A8
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_343643.html?wid=1433363&lkid=14752943

CR 10
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_441282.html?wid=1433363&lkid=14753452

CR 10S
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_796478.html?wid=1433363&lkid=14753729

++A HUGE Special Thanks To Our Patreons for Helping to grow the channel!
Jamie Robinson

The post Vigor Quest Update! – ADDING A QUEST! | #3DPROJECT appeared first on Nath042.

Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

3D Showcase is a series where nath042 tries to get cool items and tools found on the internet in front of people who may have not even known they were there. If you would be interested in seeing more like this please do not hesitate to subscribe and share. If you find any more models like this please do not hesitate to leave a link to it in the youtube comments section or in the blog comments below. It would mean a lot if you can share this with your friends who would be interested and help me grow. Until next time!

In our 3DPRINTING series, we create videos regarding 3D printing. These videos are here specifically to help the basic, intermediate or even Advanced user improve their 3D printing. If you are into 3D printing this series is aimed towards you. We are hoping to teach, learn, experiment and review. This means getting new printers to try and review, along with filament. Also to bring about new ways in which to do things such as bed levelling, modelling and small tips and tricks that can make a huge difference in the way that you print.

RaspberryPi is a series where nath042 tries to teach you cool things about the Raspberry Pi and other Pi related things. I am hoping to make this a strong series in which beginners and intermediates can start and learn how to do cool things with the Raspberry Pi from the get-go. It would mean a lot if you could share this with your friends who would be interested and help me grow. Until next time!

Thanks a lot for watching please check out the links below, help me grow and support me if possible via spreading the word. You can also support me by donating to me on Patreon, watching the adverts, or using affiliate links when possible. Thanks for reading!

Important Links
Twitter: https://twitter.com/nath042
Google+: https://plus.google.com/+nath042
Instagram: http://instagram.com/nath042
Facebook: https://www.facebook.com/nath042YT
Website: http://www.nath042.com/

++Check out this little tabletop project, called Vigor Quest (Project One)
http://nath042.com/vigor-quest

++Check out some creative merchandise
https://shop.spreadshirt.co.uk/Nath042

++Become a Patreon! Every dollar is appreciated!
https://www.patreon.com/nath042

++Purchase one of the printers I have!
Tivo Tarantula
https://www.gearbest.com/3d-printers-3d-printer-kits/pp_628790.html?lkid=11933848

Anet A8
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_343643.html?wid=1433363&lkid=14752943

CR 10
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_441282.html?wid=1433363&lkid=14753452

CR 10S
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_796478.html?wid=1433363&lkid=14753729

++A HUGE Special Thanks To Our Patreons for Helping to grow the channel!
Jamie Robinson

The post Peg Board Screwdriver Holder! | #3DSHOWCASE appeared first on Nath042.

Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

In our 3DPRINTING series, we create videos regarding 3D printing. These videos are here specifically to help the basic, intermediate or even Advanced user improve their 3D printing. If you are into 3D printing this series is aimed towards you. We are hoping to teach, learn, experiment and review. This means getting new printers to try and review, along with filament. Also to bring about new ways in which to do things such as bed levelling, modelling and small tips and tricks that can make a huge difference in the way that you print.

Thanks a lot for watching please check out the links below, help me grow and support me if possible via spreading the word. You can also support me by donating to me on Patreon, watching the adverts, or using affiliate links when possible. Thanks for reading!

Important Links
Twitter: https://twitter.com/nath042
Google+: https://plus.google.com/+nath042
Instagram: http://instagram.com/nath042
Facebook: https://www.facebook.com/nath042YT
Website: http://www.nath042.com/

++Check out this little tabletop project, called Vigor Quest (Project One)
http://nath042.com/vigor-quest

++Check out some creative merchandise
https://shop.spreadshirt.co.uk/Nath042

++Become a Patreon! Every dollar is appreciated!
https://www.patreon.com/nath042

++Purchase one of the printers I have!
Tivo Tarantula
https://www.gearbest.com/3d-printers-3d-printer-kits/pp_628790.html?lkid=11933848

Anet A8
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_343643.html?wid=1433363&lkid=14752943

CR 10
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_441282.html?wid=1433363&lkid=14753452

CR 10S
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_796478.html?wid=1433363&lkid=14753729

++A HUGE Special Thanks To Our Patreons for Helping to grow the channel!
Jamie Robinson

The post Prusa i3 MK3 – A Week Later! | #3DPRINTING appeared first on Nath042.

Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

3D Showcase is a series where nath042 tries to get cool items and tools found on the internet in front of people who may have not even known they were there. If you would be interested in seeing more like this please do not hesitate to subscribe and share. If you find any more models like this please do not hesitate to leave a link to it in the youtube comments section or in the blog comments below. It would mean a lot if you can share this with your friends who would be interested and help me grow. Until next time!

Thanks a lot for watching please check out the links below, help me grow and support me if possible via spreading the word. You can also support me by donating to me on Patreon, watching the adverts, or using affiliate links when possible. Thanks for reading!

Important Links
Twitter: https://twitter.com/nath042
Google+: https://plus.google.com/+nath042
Instagram: http://instagram.com/nath042
Facebook: https://www.facebook.com/nath042YT
Website: http://www.nath042.com/

++Check out this little tabletop project, called Vigor Quest (Project One)
http://nath042.com/vigor-quest

++Check out some creative merchandise
https://shop.spreadshirt.co.uk/Nath042

++Become a Patreon! Every dollar is appreciated!
https://www.patreon.com/nath042

++Purchase one of the printers I have!
Tivo Tarantula
https://www.gearbest.com/3d-printers-3d-printer-kits/pp_628790.html?lkid=11933848

Anet A8
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_343643.html?wid=1433363&lkid=14752943

CR 10
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_441282.html?wid=1433363&lkid=14753452

CR 10S
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_796478.html?wid=1433363&lkid=14753729

++A HUGE Special Thanks To Our Patreons for Helping to grow the channel!
Jamie Robinson

The post Dwarf Figurine! | #3DSHOWCASE appeared first on Nath042.

Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

In our 3DPRINTING series, we create videos regarding 3D printing. These videos are here specifically to help the basic, intermediate or even Advanced user improve their 3D printing. If you are into 3D printing this series is aimed towards you. We are hoping to teach, learn, experiment and review. This means getting new printers to try and review, along with filament. Also to bring about new ways in which to do things such as bed levelling, modelling and small tips and tricks that can make a huge difference in the way that you print.

Thanks a lot for watching please check out the links below, help me grow and support me if possible via spreading the word. You can also support me by donating to me on Patreon, watching the adverts, or using affiliate links when possible. Thanks for reading!

Important Links
Twitter: https://twitter.com/nath042
Google+: https://plus.google.com/+nath042
Instagram: http://instagram.com/nath042
Facebook: https://www.facebook.com/nath042YT
Website: http://www.nath042.com/

++Check out this little tabletop project, called Vigor Quest (Project One)
http://nath042.com/vigor-quest

++Check out some creative merchandise
https://shop.spreadshirt.co.uk/Nath042

++Become a Patreon! Every dollar is appreciated!
https://www.patreon.com/nath042

++Purchase one of the printers I have!
Tivo Tarantula
https://www.gearbest.com/3d-printers-3d-printer-kits/pp_628790.html?lkid=11933848

Anet A8
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_343643.html?wid=1433363&lkid=14752943

CR 10
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_441282.html?wid=1433363&lkid=14753452

CR 10S
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_796478.html?wid=1433363&lkid=14753729

++A HUGE Special Thanks To Our Patreons for Helping to grow the channel!
Jamie Robinson

The post Checking the Prusa i3 MK3 Tolerance | #3DPRINTING appeared first on Nath042.

Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

August 2018 Update!

Thanks a lot for watching please check out the links below, help me grow and support me if possible via spreading the word. You can also support me by donating to me on Patreon, watching the adverts, or using affiliate links when possible. Thanks for reading!

Important Links
Twitter: https://twitter.com/nath042
Google+: https://plus.google.com/+nath042
Instagram: http://instagram.com/nath042
Facebook: https://www.facebook.com/nath042YT
Website: http://www.nath042.com/

++Check out this little tabletop project, called Vigor Quest (Project One)
http://nath042.com/vigor-quest

++Check out some creative merchandise
https://shop.spreadshirt.co.uk/Nath042

++Become a Patreon! Every dollar is appreciated!
https://www.patreon.com/nath042

++Purchase one of the printers I have!
Tivo Tarantula
https://www.gearbest.com/3d-printers-3d-printer-kits/pp_628790.html?lkid=11933848

Anet A8
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_343643.html?wid=1433363&lkid=14752943

CR 10
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_441282.html?wid=1433363&lkid=14753452

CR 10S
https://uk.gearbest.com/3d-printers-3d-printer-kits/pp_796478.html?wid=1433363&lkid=14753729

++A HUGE Special Thanks To Our Patreons for Helping to grow the channel!
Jamie Robinson

The post August 2018 Update | #UPDATE appeared first on Nath042.

Read Full Article

Read for later

Articles marked as Favorite are saved for later viewing.
close
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

Separate tags by commas
To access this feature, please upgrade your account.
Start your free month
Free Preview