Loading...

Follow Danzco Hardwood Flooring on Feedspot

Continue with Google
Continue with Facebook
or

Valid

If you are looking for hardwood flooring in Columbia, MD, you should invest in a trusted installation service provider. High-quality wood flooring that is installed well shall help bring out the beauty of your office or home. Provided in the sections below are some of the things you must know and consider when planning to get hardwood floorings.

Areas in Your Home to Install Hardwood Floors

Hardwood floors may be installed on different areas in your home or office. May it be your bathroom, kitchen, entryway or basement, this type of flooring is recommended as it is durable and may last for a long period of time.

If you are placing the flooring on the entryway or kitchen, you should consider getting a wood type like hickory or oak. These can handle foot traffic that may be heavy.

On the other hand, if you are placing it on the office or bedroom, softer woods can suffice. These include but not limited to black cherry or black walnut.

Lastly, if you are planning to install it on your basement, you must avoid solid woods. An engineering wood floor is an ideal selection.

Wood flooring is not ideal for bathrooms or areas where it can turn wet. This is due to the fact that it may warp over time.

Maintenance and Cleaning

This type of flooring usually lasts for decades. Through regular maintenance and cleaning, it may last for a very long time. Solid and engineered wood floors may last for around 50 and 30 years, respectively.

The biggest concern when it comes to its cleaning and maintenance is abrasive dirt. Nevertheless, there are cleaning methods that you may use to combat this. It is recommended to vacuum it regularly. You can also lay runners on the entry points to eliminate the risk of bringing in dirt.

Type of Flooring Where it Will Go Over

There are many instances where your flooring will go over a surface. This can make or break the installation as not all surfaces can accommodate hard food flooring.

If you are laying it in the top of Plywood subfloor, make sure that the hardwood floor can lay flat and solid. You may install it using a glue or nail. You can also click-together the engineered strip.

On the other hand, if you have an existing wood floor, it is preferable to utilize thinner boards. It should have a long lasting finish. These provide a safe foot grip and lesser risk in tripping.

You must note that it is not advisable to install hardwood floors on top of concrete slabs and tiles. You may want to resort to using a floating floor that may be clicked together.

Plywood subfloor As long as it’s solid and flat, you can install any type of nail- or glue-down hardwood, as well as a click-together, engineered strip or cork plank floating.

Whatever it is, you can surely rely on Danzco Hardwood floors for your flooring needs. Being one of the top companies offering hardwood flooring in Columbia, Maryland, they provide excellent services with over two decades of experience.

The post Things to Know About Hardwood Wood Floors appeared first on .

Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

Known for their strength and luxurious design, Hardwood floors have been one of the most purchased floorings in today’s time. They help increase the appeal of your area without sacrificing your budget and durability of the product. Danzco Hardwood Floors in the best Maryland flooring company, providing years of experience to all homes and offices in the state-wide area.

If you are living in Maryland, flooring services are easy to reach. Danzco Hardwood Floors may help you with your flooring needs. Whether its installation, repair, sanding or refinishing, you can surely find the right services for your office or home.

Before anything else, here are some things you might be interested to know about hardwood flooring in Maryland.

Things Consider Before Getting Hardwood Floors

When getting hardwood floors, you must first identify where you want to use it and what is the floor type is it going over. By identifying these, you may lessen the options when it comes to selecting the right wood floor for you.

Flooring installation service providers can aid you in assessing your space. They can help you prepare your area before the actual installation process. The pre-installation activities may include measuring the dimensions of the area, identifying the wood flooring type and surface compatibility assessment.

Hardwood Floor Cost and Installation

Hardwood floors typically cost 1.50 to 8 US Dollars every square foot. This depends on the wood’s grade, species, and thickness. There are several pre-finished wood and engineered wood floors available on the market nowadays. These are great if you are completing do-it-yourself projects in your home.

Installation may not be as easy as it sounds. You need special handling which can be offered by service providers. Nonetheless, you can install hardwood floorings anywhere except in areas where there is standing water or humid temperature.

Flooring Repairs, Staining and Refinishing

Should you have previously installed hardwood floors, it is essential to look into its state and quality. Even if this type of flooring is known to be very durable, it may still need repairs once it wears out.

Some of the signs that your floor needs a repair are if it is already warped or creates squeaky noises. It is recommended to get assistance from hardwood floor repair service providers.

The specialists from Danzco Hardwood Floors may help you refresh the quality of your flooring. They can handle different repair issues from minor scratches up until major damages.

Hardwood floor staining helps your wood regain its original color and state. Aside from this, you can also stain your wood to get a new look and feel in your space. With this, it allows you to get an uplifted appeal without breaking your bank.

Service providers for hardwood flooring also offer to sand and refinishing. The process of sanding helps in keeping your floor smooth and free from any scratches. On the other hand, refinishing provides a new shine to your floor.

Final Thoughts

There are many hardwood flooring Maryland-based companies. Nevertheless, you must find the one which can provide you with a wide variety of services which can fit your needs.

Danzco Hardwood Floors are one of the top service providers in Maryland. Flooring installation, refinishing and staining is some of their offerings. We recommend you check out their profile and catalog when planning to get hardwood floorings.

The post Choosing the Best Maryland Flooring Company appeared first on .

Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 
What are Engineered Floors?

Engineered floors are multiple layers of wood with each layer laid in a different direction to prevent bowing and warping just as solid hardwood may when installing in moist areas. Engineered floors look exactly like real wood floors.

Engineered floors are constructed with a thin slice of real solid wood atop superior quality plywood. These floors are often 3/8 inch to ½ inch thick.  Unlike real solid wood floors, engineered floors come with wider widths starting at 5 inches. The plywood base of engineered floors can be designed to be much wider than real wood without much effect on costs.

Once installed, it can be difficult to see the difference between real solid wood and engineered wood. What can be easily distinguished is the fact that engineered floors are less expensive than solid real wood floors and are easier to install. Engineered floors are easier to clean and maintain, too.

The clever and unique construction of engineered floors prevents them from contracting and expanding when exposed to extreme temperatures and moisture at the same levels of real solid wood floors. It means then that engineered floors are safe to install in bathrooms and kitchens when real wood floors are a big no.

Wood Species

The top layer of engineered floors is made from real wood so it also comes in various species and finishes. This is the reason engineered floors looked exactly like real solid wood floors.  Just like real solid wood floors, the cost of engineered wood also depends in part on the hardness of the real wood top level.

Installation

Engineered floors are easier to install because more installation methods can be used such as nailing, stapling glue or the click method. Most engineered floor come pre-finished. They can be sanded, too but only very lightly and twice at the most as the upper layer is thin and may wear away.  

Moisture

Engineered floors hold up to moisture much better than real wood floors. Its plywood base is basically stable so it will not easily flex and warp once exposed o moisture. Plywood fibers are set in crosswise layers which are more stable than the parallel fibers of real wood.

Engineered floors are available in parquet and chevron looks in different symmetry designs.    

Latest manufacturing techniques have allowed engineered floors to be installed in almost any room including bathrooms and basements without too much moisture. Moisture issues can, however, be counteracted by installing moisture barriers.

The demand for real wood floors is fast declining. This is due to the widespread awareness of deforestation and certain changes in customer buying behaviors. One issue is that customers now want to buy boards with wider widths. Widths of real solid wood floors are constructed in a little over 3 inches while engineered floors have widths starting with 5 inches.

Engineered floors look exactly like real solid wood. They are as durable and come in the same species of wood. Well of course with engineered floors it is only the top level that is of real solid wood.  This is something that needs to be reiterated.

The post Engineered Flooring appeared first on .

Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 
Laminate flooring does one thing really well above all else: it imitates wood flooring.
Developed decades ago as an inexpensive alternative to real wood, today’s laminate flooring manufacturers have upped their game with better quality and dozens of types of wood species. You’ll find everything from American icons like oak, hickory and heartwood pine to exotics such as tigerwood and prado.
There are rustic and antiqued versions, too, in case you want your floor to look as if it’s been there for centuries. Plus, many manufacturers throw in an increasingly varied portfolio of stone, tile and metal look-alikes.
All this variety is due to the photographic process used to create the design layer of laminate flooring — a high-resolution image of actual wood that’s vividly realistic. The image is printed and glued to a core of fiberboard backed by a bottom layer that’s treated to prevent moisture damage. It’s all covered by a tough, clear top wear layer that resists scratches and dings.
With this vast array of choices before you, here are the pros you need to know:
The Good News
  • Laminate flooring comes as planks or tiles. The edges and ends are designed to snap together so there’s no nailing, making installation a good DIY project.
  • The laminate construction gives the pieces stability and prevents seams from opening up during changes in humidity.
  • Lightweight, snap-together laminate flooring is installed over a thin foam cushion underlayment. That makes it a good candidate for installations over most existing flooring — with the exception of carpet — eliminating the need for tear-out.
  • Snap-together laminate flooring eliminates the need for VOC-releasing glues.
  • No old-growth or exotic trees are used to produce laminate flooring.
  • The wear layer of a laminate floor is extremely tough, which makes cleanup and maintenance easy. Occasional sweeping keeps the surface free from abrasive grit.
A Bit More Good News
If you have your heart set on real wood but are attracted to the benefits of laminates, then wood laminate flooring may be the answer. It’s a laminated flooring product with real wood veneer instead of image and wears layers. It’ll take an occasional refinishing, depending on the thickness of the veneer.

Contact Danzco Hardwood Flooring for all of your hardwood flooring in Ellicott City.

The post Laminate Floors in Maryland appeared first on .

Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

Separate tags by commas
To access this feature, please upgrade your account.
Start your free month
Free Preview