The Romans were the first to use a heating system. This heating system was called a “hypocaust.” It sent furnace heat through the floors and walls of the homes of rich Romans.
Radiators were once built out of cast iron, making them incredibly heavy—around 500 lbs. per square foot.
Ford Motor Company was the first to develop dash-mounted heating systems in vehicles. This began in 1933 in Ford’s V-8 models.
If you ever smelled natural gas in your home, you probably thought it smelled like rotten eggs. In reality, natural gas is odorless, so energy companies add an odorant (before it’s distributed through pipelines) to it in order for it to be detectable.
The hottest natural temperature ever recorded was on July 10th, 1913 in Death Valley, California. It was 134 degrees Fahrenheit.
The hottest man-made temperature ever recorded was 7.2 trillion degrees Fahrenheit at the Brookhaven Natural Laboratory in New York.
If you suspect a problem with your furnace, how it was installed, or just need a peace-of-mind maintenance check, don’t hesitate to schedule an appointment with us here at Rods Away. We would love to help you out! Contact us via our contact form or call (01495) 687667 to speak with a member of our team today!
Banging pipes: One of the most common signs of high water pressure is a banging sound in the pipes.
Spitting from the faucet aerator when turning on a faucet: If your faucet aerator isn’t clogged, then high water pressure may be the culprit.
Shortened life of your water heater: The life expectancy of a tanked water heater is 8-12 years.
Leaking faucets: Another sign of high water pressure is a faucet that leaks only when another plumbing appliance is in use.
Shortened life of a washing machine: The lifespan of a washing machine is 10-14 years.
Running toilets: A leaky or running toilet is a less common sign, but still possible.
Don’t ignore any of these signs. They could indicate a major problem. High water pressure can destroy fixtures, especially those connecting your appliances to water sources, resulting in leaks and increased wear and tear of appliances and reducing their lifespan.
Learn More and Contact Us
If you suspect high water pressure or another plumbing issue, don’t hesitate to schedule an appointment with us here at Rods Away anytime. We would love to help you out. Call 01495 687667 to speak with a member of our team today!
The toilet: a porcelain throne designed for one purpose, yet used for many. For some, the toilet is a small but necessary part of the day: a quick pit-stop in the middle of a busy routine. For others, the toilet is a place of comfort and relaxation: a seat on which to linger, located inside a room that is sometimes the best option for peace and quiet. While both of these toilet treatments are acceptable, there is one that is not. The time has come to spread the message: the toilet is not a trashcan.
Our plumbing experts here at Rods Away know it’s important to discuss the toilet and how to use it properly. Toilet users should know which items should and shouldn’t be flushed down the toilet, helping you save money and the environment! Read on to learn more about your toilet, and contact our team to schedule professional toilet repairs today!
Flushing Your Toilet: Where Does the Waste Water Go?
Once a toilet is flushed, toilet water (and everything else in it) is sent through pipes on a property that are connected to the municipal sewer system. Once in the sewer, toilet waste water is sent to the city’s wastewater treatment facility. There, wastewater from homes, along with wastewater from businesses, industries, and other properties, is treated by a variety of processes to reduce or remove pollutants.
Wastewater treatment facilities use a number of methods to reduce and remove pollutants from water. These methods include primary treatments, which involve screening and settling out large particles. All municipal water treatment facilities also employ secondary treatment methods, which use bacteria to remove microscopic organic materials, as well as chlorine to kill off bacteria and disinfect water. Some municipal treatment facilities take things a step further and employ a final, advanced treatment process to reduce the presence of pollutants that are of special concern to the local waterbody (such as nitrogen or phosphorus). Once treatment is concluded, the water is piped back into the local water supply.
Bringing it All Together: Water Treatment, Plumbing, and What Goes Down the Toilet
With modern municipal water treatment facilities in place, it would seem that virtually anything could be flushed down the toilet — after all, it would just be filtered out, right? Wrong. Even the most advanced water treatment facilities can only filter certain materials out of water. There are other materials, such as many inorganic substances, that will remain in water even after filtration. Further, some substances are simply difficult for water treatment facilities filter out of water—if they even make it that far. Many large, solid objects flushed down toilets can damage plumbing and get stuck in pipes, leading expensive repairs and replacements for private property owners.
To keep your local water supply clean and protect your plumbing from unwanted damages, it’s vital that you flush only permissible items down the toilet. In the following sections, we cover which items should be flushed down the toilet, and which items should be saved for disposal by alternate means.
Things You Should Flush Down the Toilet
It may surprise the average property owner to read that the list of things you should flush down the toilet is surprisingly small. However, if given just a moment of thought, the “toilet shortlist” makes perfect sense. After all, toilets are designed to do away with human excrement and nothing else —flushing other items down these bathroom fixtures just doesn’t make sense (and can, in fact, cause significant damage in a number of ways). The list of things you should flush down the toilet includes:
• Human excrement. The true purpose of a toilet—to do away with human excrement. (This includes both number 1 and number 2.)
• Toilet paper. Toilet paper is a necessary item for many toilet-related duties. It is also fairly easy to filter and is best disposed of by being flushed down the toilet.
Things You Should Not Flush Down the Toilet
The above list covers all of the things that should be flushed down the toilet. As you can see, it is quite short. All items not on the above list should not be flushed down the toilet. This includes all other and liquids and solids — including a vast list of things that may disappear after being flushed.
Do not be fooled: if it disappears down your toilet, it can still cause damage down the line. Below is a list of common items that should not be flushed down the toilet (as well as reasons why they should not be flushed).
• Household products such as cleansers, beauty products, medicine, auto fluids, paint, and lawn care products. Wastewater treatment facilities are designed to treat organic materials, not inorganic hazardous chemicals. Flushing these chemicals down the drain can lead to the contamination of your local rivers, lakes, and coastal waters.
• Excess household grease (such as meat fats, lard, cooking oil, shortening, butter and margarine), diapers, condoms, and personal hygiene products. These materials can clog pipes and lead to costly plumbing repairs. In some cases, they can cause raw sewage to overflow in your home or yard, or in public areas, which can in turn lead to contaminated waterways.
• Motor oil and photographic chemicals. These chemicals are hazardous and cannot be completely filtered by municipal water treatment facilities. Their presence in the water supply can lead to severe water contamination.
• Large solid objects. Thinking of flushing your trash down the toilet? Think twice. Large solid objects can often et caught in pipes, which can lead to costly plumbing repairs and replacements for you.
Other Toilet and Bathroom Myths
To conclude this guide, we’ll spend a bit of space discussing and debunking several toilet-related myths. Ranging from the weird to the downright dangerous. Believing them could lead to environmental degradation, property damage, and money out of your pocket.
• Myth #1: “Flushable” toilet wipes are okay to flush down the toilet. These wipes may be marketed as “flushable,” but most of them aren’t nearly as biodegradable as toilet paper. They can clog pipes and contaminate waterways.
• Myth #2: A brick placed in the back of a toilet tank will save water. Bricks may take up space —but they’ll also deteriorate over time and cause other things in your toilet to break. The intended effect can also backfire, leading to too much water displacement and a necessity to flush twice.
• Myth #3: Toilet bowl tablets that contain bleach will keep the toilet clean. Cleaning your toilet bowl with bleach may seem like a good idea, but it’s really quite the opposite. If the tablet contains bleach and is designed to sit in the tank, it will destroy the working parts of a toilet within months. Nobody wants to have to buy a new toilet.
Toilet repairs and replacements From Rods Away
Even with the best toilet etiquette, accidents still happen. If you have a busted toilet in your home or business, it’s best to contact a professional in your area to address the problem efficiently and effectively. Here at Rods Away, we are proud to offer toilet repairs and toilet replacements to homes and businesses across South Wales. Ready to schedule an appointment? Contact our team today!
There are plumbing problems you can handle on your own, but others are too big to tackle. Do you know when you need to call in professional help? The five scenarios below may surprise you.
The tap won’t stop drippingMost people have lived with a dripping tap at some point. After all, a slight leak like that really isn’t causing much trouble – or is it? Left unchecked, that dripping can lead to a lot of wasted water: According to the EPA, a leak of 1 drip per second can waste as much as 3,000 gallons of water a year! Worse yet, the leak could be indicative of a bigger plumbing problem. You can try your own hand at fixing the leak, but if that doesn’t work don’t be afraid to call in the professionals. A residential plumber can get to the source of the trouble.
Your bathtub won’t drainA bathtub clog must be dealt with immediately. It will only worsen with time, and you’ll be left with more standing water in your tub. A plumber can clear the obstruction and check to be certain it isn’t part of a bigger problem. You can save yourself time and aggravation by addressing the problem early whenever possible. Call in a professional as soon as your tub begins draining slowly, before it escalates to a full clog.
Water isn’t flowing correctlyPoor or inconsistent water pressure throughout your home can be a problem. If it’s only in the shower or a faucet or two it may simply be a matter of cleaning mineral buildup out of the fixture. However, widespread problems with water flow could be indicative of a bigger issue with the supply line. A plumber will know how to both diagnose and fix the problem to restore your water pressure to normal.
Your pipes are frozenThis is a wintertime plumbing nightmare. If you’ve ever experienced frozen pipes, you know it’s advisable to call a plumber right away. If you haven’t, count yourself lucky and make the call now. It’s wise to bring in a professional before a frozen pipe cracks or bursts, rather than attempting a do-it-yourself thawing. A burst pipe can leave you with a big mess and extensive water damage to your home and belongings. Don’t take a chance; let the experts handle it.
Your toilet’s clogged and the plunger isn’t helpingOther than burst pipes, there’s nothing quite so urgent as a toilet clog a plunger can’t clear. The problem could be a sewage line issue too big to be for your basic plunger. Rather than scratch the porcelain or do other damage by trying to break the clog up yourself, call in an expert with the tools and expertise to get your toilet working again.
Need some professional guidance?
Your local Rods Away plumber is always here to help. If you’re concerned about a plumbing problem give us a call.
Over the past few days we have received a numerous amount of calls from customers, who have had issues with their outside drains flooding after some heavy rainfall.
Some of the time this can be caused by the heavy rain washing leaves and other small debris down the small drains causing them to block up. To help reduce this problem, ensure that you have a grid cover on top of you drain to help prevent this happening.
In some cases we have found that some of the drains have not been able to deal with the high flow of water and advised the customer to look at the pipe work and flow angle to ensure the propper run is there.
If you are having issues with blocked drains, give us a call or contact us for more information.
Do you sometimes hear a loud “thunk” sound when you turn off a faucet or when the water stops flowing into your washing machine or dishwasher? That’s a phenomenon called “water hammer”, and it’s more than a disturbing noise — it can be the sound of serious plumbing damage.
What’s Making That Racket?
The water in your plumbing pipes is under pressure. When it’s rushing through an open faucet and you turn it off suddenly, the flow of water slams into the closed valve, creating a hydraulic shock. The impact can cause all sorts of problems, including broken pipes, loose fittings and damage to water-connected appliances.
The shockwaves from water hammer can also cause your pipes to physically move from the jolt. If they’re not adequately secured to the joists in your home with suitable pipe straps, the moving pipes may bang against your walls, making even more noise and increasing the odds of damage.
What Can I Do About It?
Unless your home’s plumbing system is very old, you probably already have one solution in place: air chambers. An air chamber is a short length of vertical pipe installed right behind a valve. Because this piece of pipe is higher than the valve, it fills with air instead of water, and the air acts as a shock absorber when the flow of water stops suddenly.
Water hammer sometimes occurs at valves that have air chambers installed. When this happens, the cause is usually that water has bubbled up into the air chamber over time, nullifying its protective effects. But fixing this is relatively easy — simply shut off the home’s main water valve, then open faucets at the highest and lowest points of the structure. As the remaining water drains from your plumbing system, the air chambers will automatically refill with air. Reopen your main water valve and check the noisy faucet or appliance to see if the problem persists.
If your plumbing system doesn’t have air chambers and you’re experiencing water hammer, you might want to consider having them installed. You could also have devices called water hammer arrestors installed in the same place. The main benefit of an arrestor is that it’s a sealed system, so it won’t fill up with water over time. But the main drawback is that arrestors will eventually need to be replaced, whereas air chambers will keep working for decades.
Check Your Water Pressure
Even with air chambers or water hammer arrestors, you could continue to experience this problem if your home’s water pressure is too high. This is easy enough to check if you have a water pressure gauge, which you can buy for a few dollars at most hardware stores. Simply screw the gauge onto your hose bib and fully open the faucet while all of the other faucets and fixtures in your home are closed. Safe water pressure can range anywhere from 50 to 80 psi, and if your water pressure is above this range, it’s a good idea to take action.
One way to correct this is to contact your local water utility to report your high pressure problem and see what they’re able to do. They may be able to send someone to your home to reduce the pressure at the water meter. Another option is to hire a licensed plumber to install a water pressure regulator.
As you can see, tracking down the cause of water hammer and even fixing the problem can be a fairly simply DIY exercise. But if you ever need some professional assistance with more complicated steps like installing new water hammer arrestors or pressure regulators, reach out to your local Benjamin Franklin without delay. Water hammer is a serious problem that deserves your attention!
Durable as most toilets are, they all must be replaced at some point. It’s not even uncommon for homeowners to replace toilets that are still in good working order, because there are so many new features and designs to choose from. If your toilet is nearing the end of its useful life — or if you’re just eager for a change — there are lots of options waiting in store.
More Than One Way to Flush
Chances are you have a gravity feed toilet — one with a rubber flapper at the bottom of the tank, which opens up and lets gravity do the work of flushing everything away. But there are a couple of other flush mechanisms to consider.
A pressure assisted toilet is a design that uses air pressure to produce a faster, more powerful flush. They’re more common in public toilets, but they can be installed in homes, as well. Pressure assisted toilets stay cleaner longer and are less prone to clogs. They can be much louder than gravity feed toilets and are more expensive to buy and install, however.
An increasingly popular alternative is the dual flush toilet, which has both a gravity feed and pressure assisted flushing system. With a dual flush toilet, you can use a water-saving gravity feed flush for liquid waste, or a bowl-cleaning, clog-busting pressure assisted flush for solid waste.
No matter which type of flush mechanism you choose, there’s also an option for a cleaner, easier way to flush: touchless flushing. Some new toilets feature touchless flushing right out of the box, but most toilets can be modified with an aftermarket touchless flush system. With touchless flush, users flush the toilet by waving their hand over a sensor. It’s a plus for homeowners who worry about germs, and it can be a big help to anyone who has trouble using a traditional flush handle.
Form Follows Function
There are all sorts of sleek and unusual shapes among designer toilets, but there are a couple of basic design elements that all toilet shoppers should think about before they buy: bowl height and bowl shape.
The bowl height of the standard toilet is 15 inches, but this can range from as low as 10 inches and as high as 20. Taller toilets can be beneficial for people with limited mobility, because they reduce the amount of effort it takes to sit down and stand up. If that’s not an issue, and if there are small children in the home, a lower toilet might work well for everyone. Lower toilets can also assist in assuming a squatting position, which is a beneficial posture when it comes to using the facilities.
As for bowl shape, there are two main choices: elongated and round. Elongated toilets have an egg-shaped opening and are considered by many to be more comfortable because they’re more spacious. Round bowls may be less comfortable by comparison, but because they take up less space, they’re still used in smaller bathrooms. If you’d like to split the difference, elongated toilets come in a variety of lengths that allow you to get the benefits of the oblong shape in a tighter space.
Use Less, Save More
Federal standards limit the flush volume of all new toilets to 1.6 gallons, which is a big improvement on older, unregulated toilets that used as many as five gallons of water per flush. But many toilets go even farther than that, and you can be sure that you’re buying a water-saving toilet by looking for the federal WaterSense label at the point of purchase.
Similar to the Department of Energy’s ENERGY STAR labeling program for energy efficient appliances, the WaterSense program designates plumbing fixtures that help you save water. Every WaterSense certified toilet uses 1.28 gallons per flush or less.
High Tech Toiletry
If you want your toilet to be a real conversation starter, you may want to look into smart toilets. Technology commonly integrated into smart toilets includes temperature-controlled seats, bidets and dryers, automatic flush, self-cleaning technology, LED lights and remote controls to use all the sophisticated features. It might be too much toilet for most, but it’s not every day that you get to buy a new toilet, right?
If choosing the right toilet is proving more difficult than you thought, or if you just need help installing the toilet of your choice, call up your local Rods Away today.
A slow or clogged drain can be a serious problem. Most drain issues can be tracked to an obstruction in the line. This can happen anywhere in the system and can lead to odor problems or even in severe cases water damage. The first step in troubleshooting a slow drain is to determine the location. Sometimes its pretty obvious due to other drains working well or even a water damage situation. If all your drains are slow, then you can assume that the blockage is outside your home.
One of the biggest causes of problems outside your home are tree roots.
Tree roots are like heat seeking missiles looking for moisture. They’ll find those cracked pipes and start to infiltrate. They can eventually collapse the pipe or fill it so thick that very little water can get through.
Now you need a professional to accurately determine and correct the issue.
They will examine the clog usually with a camera system and determine the cause. In the past, the next step might be a trenching machine to uncover the sewer drain so that it could be repaired. Now thanks to technology, we’ve got a new option – “Trenchless Technology”. This system commonly called “CPP” or cure in place pipe, allows the professional to create a leakproof pipe right through the current pipe. No more tearing up your new yard and expensive landscaping!
We’ll be the first to tell you that there’s no substitute for the expertise of a licensed plumber. But for simple jobs — or emergencies, like a broken pipe — it doesn’t hurt to be prepared to get your own hands dirty. And if you’re going to be ready for what your home’s plumbing can throw at you, you’ll need the right tools for the job.
These are the eight tools and supplies that every DIY plumber should have at the ready:
Pipe wrench. Or rather, pipe wrenches. Two is better than one when it comes to these hefty grippers, because you can use one wrench to stabilize your work while using the other one to turn. The pipe wrench is your go-to tool for situations that demand real leverage, such as loosening a rusted old fitting. It’s a good idea to throw a few rags in your toolbox along with your wrenches — that way, you can wrap your pipes and fixtures before you work, avoiding scratches.
Basin wrench. If you’re not familiar with plumbing tools, you might not recognize the basin wrench as a wrench at all. Unlike a typical wrench head, the basin wrench has a spring-loaded, clamping jaw designed for gripping and turning bolts and fasteners in tight spaces. It’s the ideal tool for jobs like loosening the nuts underneath a deep kitchen sink.
Adjustable wrench. As the name suggests, these wrenches can be adjusted to fit a range of hardware sizes, making them very versatile. Quality adjustable wrenches are inexpensive and it can be useful to have a few of them in a variety of sizes, especially when you need to use one or two as clamps. Adjustable wrenches do most of the work with smaller jobs like replacing faucets and showerheads.
Tongue and groove pliers. Speaking of clamps, you’ll also want at least one good pair of tongue and groove pliers to help hold things in place. These pliers have a slip-joint design that allow the jaws to open wide and grab bigger things. Most pairs have long handles that also make them great for turning, tightening and loosening. As with your pipe wrench, you’ll probably want to wrap your fine fixtures with a rag before using these due to their serrated jaws.
Plumber’s putty. Also known as jointing compound, plumber’s putty helps form a watertight seal. For many DIY replacements and upgrades such as faucets and drains, a dab of plumber’s putty can help avoid leaks and keep parts firmly in place.
Plumber’s tape. One of the more frustrating plumbing problems is a leaky threaded joint, such as the one connecting a showerhead to a pipe. The solution is plumber’s tape, also known as teflon tape or thread seal tape. Just wrap a few layers around clean, dry threads, making sure to wind the tape clockwise. When you screw on your fixture, the tape will help form a watertight seal.
Plunger. They don’t call it the “plumber’s helper” for nothing. From overflowing toilets to clogged drains, your plunger is the plumbing tool you may find yourself reaching for most often. Keep it right in the bathroom so it’s always there when you need it. If you’re not familiar with proper plunger technique, take a moment to learn the ropes, and consider keeping a little tub of petroleum jelly under the sink to help you plunge more effectively.
Toilet auger. When your plunger can’t get the job done, it’s time to bring out the auger. A hand-crank toilet auger can extend a long metal cable into your toilet drain (or any drain where it will fit) to break up obstructions and send them on their way. For stubborn clogs, it’s a cheap and simple tool that could save you an emergency repair call.
You probably have a few of these tools in your toolbox already, and rounding out the list won’t cost an arm and a leg. Even if you don’t expect to get into any major DIY work, having these tools on hand might make the difference between calling for emergency repairs and handling it yourself. But if you ever do find you need the help of a licensed plumber, call your local Rods Away without delay.
TROUBLESHOOTING DISHWASHER LEAKS AND WATER FLOW PROBLEMS
Once you move on from hand-washing dishes, there’s no going back. So when the dishwasher starts having problems, there’s no time to waste in getting to the bottom of it. You can always call in a plumber — and for some problems, you definitely should — but there are some small, common dishwasher problems that you can diagnose, if not repair, all on your own.
Finding and Fixing Leaks
Dishwashers are designed to not spill a drop, but leaks can develop if certain parts malfunction or become damaged. If you have an older dishwasher, some parts may be failing due to age and wear, which can also lead to leaks.
If you notice pooling water or signs of water spray around your dishwasher, it could be coming from one or more of three areas:
Around the door. The door is lined with a rubber gasket, much like the one on your refrigerator door. If there is a tear in the gasket, or if it has become cracked and brittle with age, this could be the source of your leak.
At the water source. A hose or pipe carries water from your household plumbing to your dishwasher’s water inlet. If this connection is loose or if a gasket has failed, water could be leaking from this area.
Underneath the dishwasher. There are three places a leak can occur under here: the water inlet, the drain and the seal around the pump. Leaks in these places can be caused by loose or failed hose clamps, cracked gaskets or a broken pump.
To get a good look around, you may need to clear out the area under your kitchen sink and remove the front kickplate of your dishwasher. Use a flashlight to look everywhere for the source of the water. If your dishwasher isn’t mounted to your countertop or cabinets, you may be able to scoot the dishwasher away from the wall to get a better look. Be careful not to snag or break any hoses if you do this.
If you’re lucky, you may be able to pin the source down to a loose connection — something you can fix in under a minute. If it’s a failed gasket or pump, check your dishwasher manufacturer’s website for information on replacement parts and DIY repairs. You may find the instructions for these repairs surprisingly simple, and if it ends up being something you don’t want to handle yourself, your local plumber can always step in to make it a quick fix.
When Your Dishwasher Won’t Wash
Having a water leak is troubling enough, but your dishwasher is truly useless when there’s no water at all. And as with leaks, there are a few different common ways that this problem can occur:
The float switch is stuck or broken. The float switch is usually a plastic disc or cone that is attached to the floor of the dishwasher and is able to move up and down a few centimeters. When enough water has filled the dishwasher, the rising float switch is supposed to tell the dishwasher to stop the water flow. But if the switch gets stuck in the “up” position by soap scum or a fallen fork, no water will flow at all. This switch can also break, in which case it will need to be replaced.
The door sensor is stuck or broken. All dishwashers have a safety mechanism to prevent the flow of water when the door is not latched. If your latch isn’t “clicking” into place when you close the dishwasher, there could be a fallen object or some type of residue obstructing the latch. If the latch is functioning properly, it’s possible that the electronic switch that controls the water flow is broken and must be replaced.
There’s a problem with the water supply. If you have water in the sink, you know the problem isn’t the main supply. The next thing to check is the valve under the sink that diverts water to the dishwasher. If that’s open, follow the supply hose to make sure it isn’t kinked. You may need to remove the dishwasher’s kickplate to see the full length of the hose.
All it takes is the ability to look at your dishwasher from some new angles and identify a few parts, and you’ll be able to diagnose most water issues all by yourself. And if it turns out to be something you can’t handle yourself, you can always count on the pros at your local Rods Away.