Loading...

Follow Puzzling in wonderlands on Feedspot

Continue with Google
Continue with Facebook
or

Valid
Designed by Katsumoto, this apparently easy puzzle is a very clever packing puzzle. This version was made by Eric Fuller, but Eric has still some to sell. I really advise to grab one while you can.


So only 4 pieces with some pins to pack inside a box. Remember the best packing puzzles almost always look easy and almost always have very few pieces :)


Soon you will realize that putting the 3rd piece is impossible or difficult if you try to pack in a "standard" way the pieces. Sliding pieces will be needed!

For such puzzles when it's not easy to put your fingers inside the box to move the pieces, I always try to make the shape with the pieces outside of the box. Think out of the box makes sense here.
Then I see if moving pieces can be done inside the box, and if not then I try to find another shape with the pieces.
Many more moves than expected will be needed to solve the puzzle, with big "hah-ha"


For me this puzzle really embodies the perfect packing puzzle: challenging but not frustrating with an unconventional way of solving it.

I am sure you will like it as much as I did. It appears in my top best packing puzzle.
Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 
So here comes the time to review the latest 2 puzzles designed and made by Yuu.

Some points good to mention before: the quality is still very good with a great contrast of colors between the color of the pieces and the color of the tray.
Also this time the pieces are not transparent, so less prone to fingerprints. And I like the smoothness of these pieces!

So let's start with the first: wave 5
Like its brother you have some wave-shaped pieces to pack inside the tray.
How difficult can it be? Well it's hard, it's puzzling, it's fun!
I was wondering why Yuu seemed to make difficult puzzles and then easier after. Like for example he released jigsaw 29 and then jigsaw 19, and clearly 19 is easier than 29.

Some may think it's easier then. Well wave 7 was super hard. Wave 5 is maybe a little bit less hard, but it's still very challenging and not that way easier.

I cannot say more, but you will have your "aha-moment" for sure pretty soon in your puzzling journey ;)

It took me a lot of time, way more than I expected. I like it a lot.



Now, Ice 9: the beast!!


Some nice pieces with weird angles.....The challenge is that you have many pieces that can go with many other due to the rounded or curved angles of the pieces. So a lot of possibilities to put the pieces together....and obviously you will have some holes as the pieces cannot cover the whole tray.

This is probably the most difficult puzzles in the whole series (as of now...who knows about the future hahaha) and this will keep you puzzling for long time. 

Trust me the "aha-moment" comes at the very end...and you really realize how Yuu is a very devilish guy. He likes to put you on the wrong way and you will do so....until you try new things.....


As with his previous puzzles, I can only say that you should definitely buy both puzzles. 

You can contact Yuu HERE. I don't think these puzzles are limited edition, but they may take "a bit" of time to make, so if you're in a hurry to be "puzzle-tortured", hurry up and send Yuu an email ;-)


Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 
I will maintain this blog that will still be about puzzles, but I have created a new blog

I have also put it in the section "blogs that I follow".

This blog will be updated from time to time and will be about:
-> things that I sell, so this may be worth checking if you're looking to buy anything special or start a new collection (I will put some collecting things). Right now I put champagne caps.

-> things that I like, feelings, etc.

It won't be about puzzles.

To contact me if you're interested, you can still use the contact form in my current puzzle blog.
Enjoy!
Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 
OK, I finally solved the beast!!

This puzzle is a take-apart puzzle and has several steps.

First you need to crack the code of the lock using the brass knob which produces clicking sounds and the symbols on the back of the puzzle.
This step was hard and I even had ideas that were trickier than the solution, but when you don't make progress you try to imagine what you can :)


You need to play with the puzzle in a quiet room, analyzing the clicks, their number and other things. Trust me, this will keep you busy for some time!
And as the lock doesn't pop when it's opened, then you need to pull up the shackle each time you think that you've found the right code.

You think you've solved the hardest step of the puzzle? Hummm, I thought so, but hell is coming!!!

Now you've unlocked the lock and taken out the rod, the cage of the thief can be rotated, from time to time it blocks, from other time it seems it can be pushed a bit.....But I am sure you won't understand the feature until you've solved that part. Not only because it's tricky, but also because many things are involved in this step locking the puzzle in many ways.

Right, part solved? Thief release? Now find her jewel. I looked everywhere and I could not find it....Damn!! I even thought I lost it on the floor when solving the puzzle ;-(

Remember: solve this puzzle on a flat surface. Things can fall...roll...

But actually there is no way the jewel can be lost, it's hidden somewhere and you will need to perform some more steps to find it.

After finding it, Jon made you a surprise! I cannot tell, but there is more to discover and you will really like it I am sure ;-)

A lot of work has been put into creating the puzzle, many steps and many parts for each steps.

Strongly advised for metal puzzle collectors and for people who like to be puzzled for long time!

Resseting the puzzle for the next victim is very easy, good news, no? :)


Not sure if they are sold out now (as it's in limited edition), but if not, you'd better be quick if you want one.
You can find Jon's contact on my previous post of the tumbler puzzles.
Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 
After the tumbler puzzle designed and made by Jon Keegan that I reviewed few days ago, here comes its big brother: the Double Tumbler !

Some may wonder if it looks (and can be solved) same as the tumbler and may hesitate to buy it or not.
I always feel frustrated when I buy puzzles that are the same but with minor changes. So let me explain why it's pretty different from the tumbler and why you should get both.

As a first sight, it's a cylinder, but apart from the anodization color, you will notice that you have 3 moving parts, compared to 2 for the tumbler. Which means, this should be more challenging than the (already challenging) tumbler puzzle! ;)


You still get the holes on the core of the puzzle, which look nice and can be of a help to solve the puzzle. Well, of course it does not show everything!!

As for the tumbler you will hear some ball bearing, you may assume what you need to do and you may be right. But then how to do that?
Sometimes, the top cap can be rotated, sometimes it's blocked and sometimes you can pull the cap a bit....bu the puzzle is still locked.

As for the internals, when you open it you will notice several changes from the tumbler and you will see how Jon has a twisted mind implementing some traps here and there. And you should definitely understand such or such situation that happened when you were trying to solve the puzzle :-)
I cannot tell more without spoiling, but in my mind both tumbler are worth the case to be bought together. And you should start with the tumbler, then experience the double tumbler.

Same good point as for the tumbler: no spring involved, hence no issue with damaging the top/bottom of the cylinder with it.

Jon should still have some in stock, you can contact him to check!
Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 
You may remember that Jon Keegan released jewel thief, tumbler and double tumbler.

So far, I have only solved completely the tumbler puzzle, so here are my thoughts about it.


The first thing to mention is the great quality and the nice anodized green color. The anodization is not only nice but also protects and makes the puzzle more resistant. So it has a useful function as well!

Jon got the idea from the famous first cylinder puzzle designed and made by Wil Strijbos. Despite some common features there are also some nice differences.

So let's go about the differences!

It's bigger than the first cylinder and has some holes. If I am right, Jon made these holes to help the solver because many people considered the puzzle to be too hard. I really like the idea, but despite it shows a little bit from the inside, it did not help (or maybe I did not think enough?...) that much to solve the puzzle.

The puzzle has 2 moving part and they need to be rotated in some ways...cannot talk more about that, though...But the thing is that there is no spring (compared to the first cylinder), so the puzzle will not pop when opened. I really like the pop sound, but the spring also damaged the bottom of the puzzle. Here, no issue about damaging and the moves are very smooth.


The puzzle is more complicated than the Strijbos' one and when you make a progress you will know what to do, but easier said than done! ;-)

At some point the puzzle opened a bit and as you may want to do (or may will) I closed it...you know sometimes you need to close and find different ways to make more progress. Luckily I managed to open it again a bit and at some point it opened.
Not sure if it's made on purpose (I am pretty sure it is, but then I will now try to figure out how it was possible) that the puzzle could open a bit, before completely be opened after some more moves.

Once opened, you can see the internals and try to find a way to solve it faster for the next attempts.

Now, I will try to solve its big brother (double tumbler) which should be even more difficult!

You can contact Jon to check if he has some left. Definitely a must-have!
Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 
After his 2 jigsaw puzzles, Yuu Asaka keeps on designing nice plexi packing puzzles and this time it have like wave-shaped pieces.

The goal is still the same and the challenge is still high! And it's definitely more difficult than the jigsaw 19 as you have a lot of possibilities to put the pieces inside the tray.

You will notice that some pieces fit perfectly with others when they have the right orientation and you will also soon realize that you will have to put some pieces vertically and some others horizontally. Now the challenge is: which pieces... :-)

I needed a bit of help for this one and even with the help it was still challenging. 



The puzzle does not require any force to make the pieces fit inside the tray. The fit is absolutely perfect like Yuu's other packing puzzles. So you need to think about to put 2 pieces so that the gap between them and outside of them is as small as possible, so that you can "save" some space for the other pieces. You need to take into account the shape of the pieces and experiment if you can put such or such piece inside them.

To conclude: a puzzle that will puzzle you for long time!

If you want to buy it, you can contact Yuu.

I would not be surprised if it pops up at next design competition ;)
We'll see!
Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 
Yuu made Jigswaw 29 that I reviewed previously and he made 2 new puzzles.
So far I have only solved one, so the other one will be reviewed later.

It's called: jigsaw 19. And the goal is the same: just pack the pieces inside the tray!
"Just"?....

Well if you have played with his bog brother you will see the same features that differenciate this puzzle from a regular jigsaw puzzle.

It took me less time to solve (well there are fewer pieces also) and knowing the special features of these puzzles, I tried another approach. Trying to see which piece goes with which. And I ended up with some "packs" and put them together.

Sometimes a piece can also go with several, but you will soon realize if you're doing things right or not :)

In terms of quality: perfect! Nothing to say. The fit is perfect as well and the colors well choosen. The only drawback with plexi is that it attracts dust :-(

In terms of difficulty: no doubt it's challenging. Lesss than its big brother though. For me it's better to start with this one. And give it to non-puzzle friends and watch their face when trying to solve the puzzle hahaha.

You can contact Yuu to get your puzzle. The other packing from Yuu is pretty different and super challenging! So far no real progress on it.
Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 
Lock cracked!!
It was epic, pretty hard. Maybe I should have tried the 10000 combinations hahaha

Now I need to release the poor little thief still jailed. What? It's seems he changed position....was I so long?... ;)



I assume the code can be changed, but what's the point?
After all it's not about guessing the code, it's about finding a logical way to manage to find it using all the informatio provided to you. Got it?

1st step was hard...it seems second step is not easy as well, challenging puzzle.

I think not a lot of them are available now, so I strongly advise you to hurry if you want it!
Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 
Time to review a new kind of puzzle!
Designed and made by Ilya Osipov, this puzzle got an honorable mention at past IPP in San Diego (2018).


The puzzle is made out of 3D material and obviously magnets!

The goal is to have all the magnets in the center like in the picture on the right.
You have 2 kind of moves: one is to rotate the 2 inner parts, the other move is to rotate the halves of the puzzles. After scrambling the puzzle, you will get magnets pointing in many direction, and now the fun begins!!!

I like a lot the noise of the magnets, the "clicking sound" each time your rotate something.

So this puzzle is like a twisty, but more fun. I like the look, and the puzzle is bigger than what I expected. It seems solid as well. So normally you can let your friends play with it.

No algorithm exists yet, and I hope one will be created. It's like rubix's cube: without algorithm it's not possible to solve. But....for this one, Ilya said that a person should be able to solve it under 2 hours, by just rotating again and again.
And he is quite right. For me it's took probably around 30 minutes (definitively less than 2 hours) to solve the puzzle. I had no strategy at all, I tried to elaborate one but I failed. But at some point, I came up with a solved puzzle!
However, again it would be nice to be able to solve it faster with an algorithm.
And a good idea would be to make like a "pro-auzzle", a professional version for speed solving ;)

If you want your auzzle, you can contact Ilya: HERE

There is also a mathematical demonstration HERE with a youtube link as well in case you're wondering about the moves ad the clicking sound, don't expect to understand anything as it's in Russian haha

Ilya's facebook can be found HERE
Read Full Article

Read for later

Articles marked as Favorite are saved for later viewing.
close
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

Separate tags by commas
To access this feature, please upgrade your account.
Start your free month
Free Preview