Whatever your plumbing needs, a Knoxville plumber can help you, and we are at your service whenever you need plumbing repairs, installations and general maintenance. When you need to look for a Knoxville plumber, we understand that there are a lot of options to choose from.
Plumbing tips bring benefits any time of the year. But, after a long winter, they are especially helpful. Concerned about springtime plumbing problems? You are not alone. In many places, spring brings with it a welcome release from the cold and dangerous conditions of winter. In addition, it brings an opportunity for homeowners to take a good inventory of any damages caused by winter’s wrath. Here are some springtime plumbing tips to help you make sure your pipes are up to dealing with the rest of the seasons.
Outside plumbing tips
The best place to start with your spring plumbing check is outside. By ensuring the proper drainage of rainwater away from your home, you will protect your foundation. Make sure you look for signs of leaking pipes, as well.
Gutters take the brunt of winter’s storms. By spring, gutters are often choked with dead leaves, twigs, and other debris deposited by winter winds. Clogged gutters and downspouts allow rainwater to sheet down the walls of your home and seep into the foundation. Clean out the gutters and be sure to replace any damaged or broken sections. And remember to blast water through the downspout to clear it, as well.
Outside faucets & pipes
Even insulated pipes can freeze in some winter conditions. Leaving your hose on the hose bib and connected to the faucet can also cause your pipes to break if water freezes in them. Check your outside faucets and pipes and make repairs or replacements as needed.
Mainline & sewer line
Standing or puddling water in the yard may indicate a break in a buried pipe, such as the main line or sewer line. If you suspect this is the case, call a professional immediately.
Inside plumbing tips
Problems inside the house can also represent plumbing issues. A number of these problems can be dealt with using DIY techniques. Some, however, need the trained touch of a professional plumber.
Winter parties, hosting guests and being cooped up inside all lead to extra usage of your plumbing system. Drains take a particularly big hit during this season. If you find your drains working slowly, you can try non-chemical DIY fixes. Many chemical-based DIY fixes end up seriously damaging pipes and requiring much more time and money to repair. Some people clear clogged drains by simply using a smaller form of a plumber’s snake. If your drain resists your efforts to remove or dislodge the clog, call in a professional.
The next item you need to inspect dwells in probable obscurity in your basement. Your sump pump provides your main line of defense against basement flooding. You will want to make sure it is in prime condition before you need it. Check this appliance by pouring a few buckets of water into the sump pit. The pump should start within a few minutes. Watch to be sure the water flows out and the pump cycles itself off. If any problems arise, you will need to contact a professional to conduct repairs or replacement.
Don’t let plumbing problems drag you down this spring. Follow our springtime plumbing tips to safeguard your pipes and your home. Remember to call Knoxville Plumbing for all your plumbing needs!
One of the most-used and least-thought-about appliances in your home lives tucked away in either your basement or an out-of-the-way closet. Your electric storage tank water heater. We do remember it, though, when we run out of hot water. Although problems are not common, they do come along from time to time. Let’s take a look at the most common problems you’ll see with electric water heaters. Safety tip: Remember to UNPLUG the appliance before you start troubleshooting.
Problems with water temperature far outrank any other water heater problems. Thankfully, repairs tend to be inexpensive for these types of issues.
No hot water
When you have no hot water at all, check your circuit breaker to make sure a breaker has not been tripped. If the circuit has been tripped, switch it off and back on again to reset it. If the problem is not the breaker, you will want to check the hot water temperature reset button above the upper thermostat inside the heater. In electric water heaters, failed heating elements or a faulty thermostat can also cause no hot water. If this is the case, you will need to check both the upper and lower elements and thermostats and replace whatever is malfunctioning.
Not enough hot water
Tank size. The primary cause of not enough hot water is a tank that is too small to meet your family’s needs. If your family has grown since you bought your home or if you have added newer water-using appliances (i.e. dishwasher, washing machine) your tank may not be able to keep up with the increased demand. In this case, the best option is to replace your tank. The Department of Energy provides guidelines on sizing your water heater tank needs. We also encourage you to consider multiple options such as our tankless or on-demand water heaters.
Electrical issues. A thermostat that is set too low can also explain why there is not enough hot water. Other culprits can be a failed upper water heater, a faulty thermostat or loose wiring. The elements can also become encrusted with sediment which prevents them from heating the water adequately.
Water too hot
This problem most likely stems from a thermostat that is set too high. You will have to access the thermostats for each element to lower the temperature. If you are unable to lower temperature settings, your thermostat has most likely failed and will need to be replaced.
The second most common problem with electric storage heaters is leaking. Leaks present significant safety hazards and should be dealt with as soon as they are discovered.
From the top
While water leaking from the top of the tank poses a less immediate threat, you still need to address it in a timely manner to keep it from becoming a more serious issue. Water leaking from the top of the heater tank can come from only a limited number of sources, most of which can be easily remedied. Check the ball valve in the cold water inbound line. If this is the source of your leak, simply tighten the nut securing the handle to the valve. Another potential leak site is the temperature and pressure relief valve on the top of the tank. If this is leaking, you will most likely need to replace it. If water is leaking from any of the pipe joints, you will probably want to call in a professional to make repairs.
From the bottom
Water under your tank can be coming from a loose heating element gasket, simple condensation, or a little run-off from the TPR valve releasing some water. It can also be a case of corrosion rusting out the bottom of your tank, in which case, the tank will have be replaced.
Electric water heaters don’t generally have problems, but when they do, you’ll know what to look for. If you decide to replace your water heater, we’d love to talk with you about your options. Water heating isn’t just for tanks anymore! As with any type of plumbing issue, if you feel uncomfortable troubleshooting or managing repairs, give us a call! We offer 24-hour emergency service and welcome the opportunity to serve you and your family.
Gas water heaters remain a popular option among homeowners. In spite of competition from their electric counterparts, gas storage water heaters supply hot water to about 60% of America’s homes. How you choose to heat your household water makes a difference in an economy where heating water in the home has become the second-largest household expense, according to the Department of Energy. Gas storage water heaters are a great option for lots of families, but they can still have some drawbacks. Let’s take a look at some of the common problems associated with a gas storage water heater.
Gas water heater problems with performance issues
Typical gas storage water heaters tend to outperform same size electric storage water heaters. They just have a faster recovery time. Sometimes, though, older — and even newer — units can malfunction. Here are some common gas water heater problems.
Little or no hot water
Arguably the most annoying hot water heater problem, reduced or no hot water when it’s needed ranks as the most common issue. Little hot water results from a variety of issues.
Increased demand for hot water prevents the water heater from fully heating water before delivering it. Are you remodeling? Do you have guests or a new family member? How about a new, larger washing machine? All of these can increase the demand for hot water and affect how quickly the water heater recovers. Other common causes of reduced hot water supply are:
Thermostat set too low
Faulty dip tube
Sediment build up in tank
Incoming water pressure is low
Dirty or faulty gas burner
Adjust the thermostat to a higher temperature and see if this resolves the issue. If not, you may need to check the thermocouple. This is a safety device that shuts off the gas if the pilot light goes out. It is fairly easy to replace. A faulty drip tube delivers cold water into the tank at a higher level than designed. This allows the cold incoming water to mix with the hot water at the top of the tank and cool it down. Replacing the drip tube can remedy this problem. Over time, sediment build up in the bottom of all storage water heater tanks. This layer of sediment prevents the burner from heating the water as efficiently. Annually flushing your water heater eliminates this problem. The gas burner beneath your water heater may also be in need of cleaning or replacement.
No hot water
If you have no hot water, you might have a problem with your pilot. Pilot lights can go out when there is no problem with the unit. If this is the case, simply relight the pilot. If the pilot fails to stay lit, you probably have a bad thermocouple. Older gas water heaters have a pilot easy to light with a match or a candle-lighter. Newer models, however, have a button you push to activate a spark igniter inside the burner compartment. If the problem is the thermocouple on an older unit, you can DIY the replacement. A newer unit requires the services of a professional because the thermocouple is behind the sealed compartment and not easy to access safely without the proper equipment. If the thermocouple is not the problem, you might have a faulty gas valve. In this case, definitely call in the professionals.
If you find water on the floor under or near your water heater, you need to find the source of the leak. Leaks can occur in several different places on your water heater. One potential leak location is the top of the tank where the cold water enters the drip tube. This leak presents an easy fix. Just tighten the connections. The T & P (Temperature & Pressure) relief valve sits on the outside of the tank near the top and has a small pipe running to a drain near the heater. You can repair a leak from this valve, but if the leak originates in the bottom of the tank, you will have to completely replace the tank.
Gas water heater problems with sounds and smells
Faulty plumbing and normal wear-and-tear provide a homeowner with plenty to do. Unfortunately, gas water heaters have a reputation for some additional types of problems.
Rumbling. Popping. Ticking. Sizzling. Hissing. Hammering. Knocking. Gas water heaters have a reputation for conjuring all of these noises. Fortunately, each sound indicates a specific problem or two for you to check and correct.
This occurs when sediment has built up in the bottom of your tank. The sediment causes the water to boil. Water bubbling up through the sediment makes the popping sound.
The Fix: Flush your tank annually to keep sediment from becoming a hazard. Or, install a water softener system to prevent sediment from collecting in the tank at all.
Ticking noises come from a couple of problems. The first, variations in water pressure, you really can’t fix. The second, however, presents an easy fix. The pipe straps holding the hot water lines that come out of the tank can be loose and cause an annoying ticking sound.
The Fix: Pick up some plastic spacers at the hardware store and install them to keep the straps from slapping into the pipes.
Sizzling or hissing:
This sound also arises from a couple of possible sources. A tightly closed relief valve can generate a sizzling sound. Water dropping onto the hot gas burner assembly will also cause a sizzling noise.
The Fix: Not so easy this time. The water dripping onto the burner is probably coming from the bottom of your tank. A leaky tank can’t be fixed. It must be replaced.
This is also a sound you really don’t want to hear from your tank. A rumbling sound occurs when the tank has begun to rust out from sediment build-up.
The Fix: The rusting metal leads directly to a leaking tank, which, as stated previously, leads to a replacement.
Has this ever happened to you? You turn the hot water on, step into the shower and get splattered by reddish brown streams jetting from your shower head? Hopefully, it hasn’t. But, if it does you can narrow it down to a couple of sources. Rust in plumbing can cause water to appear yellow, brown, or red. The rust could be in the pipes inside your home. It could also be in the outside pipes leading into your home or even in the water heater. The good news is that it’s not really a health hazard. The bad news is — well — it’s pretty unsightly. It also causes the water to taste metallic and can leave stains on clothing and toilets and tubs. This fix has to be handled by installing a water treatment system.
Rotten egg smell
Unfortunately, discolored water is often accompanied by a nasty, sulfur-like rotten egg odor. This sewage-like smell indicates that bacteria are growing in your water heater. This happens for a few reasons. If you’ve been away and turned the water off or turned the thermostat too low to keep the water hot, bacteria will take advantage of a prime place to colonize. Although the bacteria are not harmful, it’s best to have a professional plumber help you deal with this problem.
Your gas water heater provides essential service for your family. Make sure you take care of it.Whether your gas water heater is new or old, if you’re experiencing any of these issues, Knoxville Plumbing is here to help. Give us a call today for any of your plumbing needs!
When we hear the phrase “water heater,” most of us probably get a picture in our heads of the traditional storage water heater. Although many other types of water heaters are now available, the standard storage water heater remains the most commonly seen in homes across the United States. A storage water heater consists of a tank or reservoir that holds water. A pipe brings cold water into the tank, where it is heated. Warm water rises to the top of the tank and is disbursed through another pipe whenever hot water is needed throughout the house. Storage water heaters all do basically the same thing, they just use different sources of energy for heating the water. Let’s take a closer look.
The basic structure of a storage water heater is pretty simple. The visible part — the drum — is a tall cylindrical tank made of heavy metal, a layer of insulation and an outer shell. Tanks hold 30 – 80 gallons of water, depending on size. Cold water enters the tank through the dip tube. The end of the heat-out pipe lies near the top of the tank, ready to whisk heated water wherever it is needed. Other essential parts of each storage water heater are the thermostat, drain valve, pressure relief valve, sacrificial anode rod, and a shut-off valve. The heating mechanisms differ in how they supply the heat needed to warm the water. We’ll look at gas water heaters first.
Gas Water Heaters
Gas water heaters, as the name implies, use natural gas or propane to fuel the heat for your water. The heating system for this type water heater has two main parts: the burner and the venting system.
The burner sits beneath the tank in a small chamber. This burner operates on the combustion principle. Gas — either natural gas or liquid propane (LP) flows through a valve into the burner. A thermostat located outside the tank projects a heat sensitive probe inside the tank. The thermostat controls the flow of gas to the burner. Combustion occurs when the pilot light ignites the gas flowing through the burner. Flames heat the bottom of the tank, transferring heat to the water inside the tank. Small openings in the combustion chamber allow air to enter.
As long as gas and air continue to flow into the combustion chamber, the burner will continue to heat water. Thermostats are generally set between 120 to 180 degrees Fahrenheit , although newer models may restrict the upper limit to 150 degrees Fahrenheit. An energy cut off switch acts as a safety mechanism within the thermostat. If the probe detects water temperature above 190 degrees F, the energy cut off valve shuts off the gas flow. If this happens, you usually have to replace the entire gas valve mechanism. The combustion process, though very efficient for heating, produces harmful fumes and requires proper venting.
The Venting System
Carbon dioxide, carbon monoxide, and nitrogen oxide produced in the combustion process are harmful to breathe. They must be vented outside the home or office to protect the people inside the buildings. Gas storage water heaters use a flue and hood venting system. The flue consists of a bottom hood within the combustion chamber. This hood collects and directs the exhaust fumes up through the flue. The flue itself is a small tube rising through the tank and exiting at the top. Many flues now contain baffles. A baffle is a shaped like a helix. It deflects the exhaust push the heated air to the sides of the flue to help heat the water. Exhaust exits the tank through the draft hood located just above the top of the tank. The draft hood prevents back drafts into the flue and vents noxious gasses outside the home or office.
Electric Water Heaters
Electric storage water heaters have the same basic parts as their gas-fueled cousins. Rather than heating water with fire, though, electric water heaters use electricity. The heating system for an electric water heater also has to main parts: the elements and the circuit control.
The elements in this system work much like the burners on an electric stove. Elements may be stainless steel or copper-plated. They consist of a wire surrounded by filler material encased in a U-shaped tube of either stainless steel or copper. They project into the tank about one-third down from the top of the tank and one-third up from the bottom. Each element has its own thermostat. As electricity flows through the inner wire, resistance in the wire generates heat. The heat passes into the filler material and outer sheath of the element to heat the water. The upper element operates first to heat the top one-third of the water to the temperature set on the thermostat. Once the upper water has reached this temperature, the lower element comes on and heats the middle third of the water.
The control circuit
The control circuit includes the elements, thermostats, a high limit control switch, and a reset button. As in the case with the gas-powered water heater, the electric water heater also carefully monitors water temperature and pressure. If water temperature in the electric water heater exceeds the established limit, the high limit switch activates and shuts down the entire unit. You can restart the unit once it cools by pushing the reset button on the thermostat.
Well, there you have it. Although both types of storage water heaters provide the same function, the do so by very different means. When you’re considering a new water heater, be sure you review all your options carefully. Both types of heater have energy efficiency and safety features built in. Just how much money you can save will depend on the needs of your family or business. Give us a call today. We’ll walk you through all the details and help you make the best choice for your particular needs.
Whether you’re renting your home, or you own it, one issue you are bound to have is the dreaded “slow drain.” Thankfully, this problem is typically nothing too serious, and you should be able to fix it on your own. Before you try to fix it, you should have a clear understanding of how your sink works and what is the probable cause for your sink or shower draining slowly. Once you understand the basics, there are a few key tricks that can help you unclog your drain, DIY style.
What Type of Drain is Slow?
As previously stated, knowing how to fix your slow drain depends on two things:
Which drain is slow?
What are the common causes for that particular drain?
After those two things are figured out, fixing your drain should be a breeze.
If your shower or bath tub drain is not working as well as it use to, the most common reason for this is hair. It doesn’t matter if you have short or long hair, if you give it enough time, the hair will build up in the pop-up assembly of your shower/tub drain and cause it to drain much slower than normal. If this isn’t taken care of, your hair will soon trap other sorts of debris which will eventually lead your drain not draining all together.
The most common reason your kitchen sink would not be draining will be food related. One of the biggest culprits is grease that gets trapped either in the P-trap, which is the curved section of your drainpipe that is located under your kitchen sink, or the drain basket itself. Food itself can get stuck in the bottom of the P-trap and hinder waterflow. Not only will this problem be inconvenient, but it can also get smelly.
Other Common Drain Problems
Its important to know that just because your drain is draining slow, doesn’t mean that the problem is right at the surface. You should also be well informed about how your venting and sewer lines function, and what the signs are of a malfunction.
These are the main lines that will carry your household waste water and sewage away. One of the biggest things that can mess up your sewer lines is tree roots. The tree roots are attracted to all the nutrients that flow through these lines, and the roots will find any weak points, cracks or holes in your sewer lines. They will push their way into the pipes, rendering them useless. Its also important to know how old your pipelines are, because another common cause for sewer line problems is that they have begun to collapse or deteriorate. One big red flag that is indicative of a sewer line problem is if your toilet constantly clogs or flushes slowly.
Vent stacks are an important part of your plumbing because they allow air into your pipelines, reducing the vacuum effect that would restrict water flow. These stacks are in your bathroom and kitchen areas around your house. Typically, vent stacks are the pipes that are protruding through your roof. The most common reason they get clogged is by leaves, sticks and sometimes bird nests.
There are several things that you can try before calling in a professional to come and fix it for you. Just remember to clear out any standing water in your sink or tub before you try to move the blockage, as the water will get in your way.
Boiling Hot Water
This is going to be your cheapest way to try and fix your draining problem. With this method, all you have to do is boil some water on your stove, make sure that there is little to now standing water in your way, pour the hot water into your sink and wait. You may have to repeat this process, but if the clog is small enough, this should move the clog along and out of the way.
Vinegar and Baking Soda
For this method, you poor about a cup of baking soda into your drain. Next, pour the same amount of either white or apple cider vinegar down the drain. This combination will bubble initially, then it will calm down. Once this happens, put the stopper in your drain and wait for about 15 minutes. After that time frame, run hot water to see if this cleared the clog.
It is a good idea to invest in a designated sink plunger, if you can’t fix the clogs with the previous methods. You can use a sink plunger on either a single or double sink. If you have a double sink, first seal off the second side with either a wet cloth or a stopper. To properly plunge your sink, you will need fill you sink up with enough water to cover the bell of you plunger. Then all you must do is plunge it like you would a toilet. If this works, you should hear the suction clear the clog, remove your plunger and run warm water for a few minutes.
This tool, also called an auger or plumber’s snake, can clear the clogs that might be stuck deeper in the system. You simply stick this down the top of your drain until you feel something stop it, which is probably the clog. Then you twist it around until you feel the obstruction loosen. If the clog is even deeper, you will have to take apart your drainpipe and P-trap.
While DIY fixes save money, they do not always work out. If your DIY fails or if you just do not have the time to track down and fix the slow drain issue, we can help. Contact us today. We can help you get your drains flowing smoothly in no time!
Water heaters. We use them every day without thinking about them. The next types of water heaters in our series provide cost-effective and exciting ways to heat your water and save money.
What is a Tankless Coil Water Heater?
It is a device that supplies hot water, whenever needed, without the use of a water tank. It utilizes the hot water boiler to heat water for the household plumbing. In some cases, it is a slide in option for select boilers.
How Does a Tankless Coil Water Heater work?
When the hot water faucet is turned on, cold water is flooded into the inlet side of the heat exchanger in the boiler. The heat exchanger is located near the top of the water or steam boiler and is typically made of copper pipes. The copper piping ensures the best heat transference. After this process, the water is usually too hot for household use. As such, most setups have a regulated tempering valve which releases a small amount of cold water. This allows the water to cool to a safer temperature of about one hundred degrees Fahrenheit.
Pros of having a Tankless Coil Water Heater:
It’s easily fitted to most boilers, including steam boilers. It is far more cost-efficient in the winter months than a typical water heater. This type of water heater is much cheaper to install and maintain than basic water heaters. If something were to go wrong or break, these water heaters are easier to replace. It basically supplies limitless hot water to the household. The biggest pro is the saving on heating costs because it doesn’t lose any heat from standing heated water.
Cons of having a Tankless Coil Water Heater:
While it is cost savvy in the winter months, this isn’t a great option for people in warmer climates, or during summer months. This is due to the reduced need and frequency for hot water on demand. Also, it’s lifespan is not as long as other water heaters. The Tankless Coil Water Heater only lasts about 10 years if properly maintained. Unfortunately, the Tankless Water Heater is not compatible with a furnace. Something else to consider is the quality of water running to your household. If the household is on hard water supply, the Tankless Coil Water Heater will require a water softener to run smoothly and efficiently.
What is an Indirect Water heater?
The Indirect Water Heater is a more cost-efficient and environmentally friendly way to heat water. It is a little tank-like device that holds a coiled heat exchanger. The Indirect Water Heater relies on the boiler to heat the household water, as it does not produce its own heat.
How does an Indirect Water Heater work?
A closed-loop water pipe connects the Indirect Water Heater to the boiler, where the boiler supplies heated water to it. This boiler water never mixes with the water in the Indirect Water Heater. The water circulates through the heat exchanging coils, heating the water in the tank that is for the household use. The Indirect Water heater is basically a conduit. The household water flows through the water heater to be heated and pushed up to the household appliances. The Indirect Water Heater pays for itself as it saves on heating costs, and allows the furnace to turn off and on less often.
Pros and Cons of having an Indirect Water Heater.
The Indirect Water Heater is very similar to the Tankless Coil Water heater. They both are great money savers, both better for winter months/cooler climates. The main difference between them is that a Tankless Coil Water Heater cannot use a furnace in its functions, whereas the Indirect Water Heater is furnace compatible.
If you are in the market for a new water heating system and are looking to save some money then give us a call today! We are ready to help you with your next home improvement project.
Do you call a licensed plumber or DIY it? Despite the claims of popular DIY shows, not to mention YouTube videos, there are just some plumbing issues you cannot DIY. The key for the average homeowner is knowing their own limits. What might be a simple fix for a professional could run into two or three times the trouble and cost with a DIY-gone-bad.
That said, Knoxville Plumbing has put together a short list of plumbing issues that can usually be a successful DIY project along with ones that should be handled by a licensed plumber.
The most successful DIY projects will only require a minimal number of tools and will be in easy-to-access areas. They may require a trip to the hardware store, but should not take too much time out of your day.
Faucets leak from either the handles or the spout. To DIY repair the leak you have to determine where it originates. After you figure out where the leak is, turn off your water supply to the faucet. Next, disassemble that part of the faucet, using appropriate tools. You may need to replace O rings, washers, cartridges, or an aerator. Taking the worn or damaged part with you to the hardware store will help you to figure out exactly which replacement you need.
Most clogs respond well to DIY treatments. Try pouring boiling water down the clogged pipe, as long as it is not PVC. Other common and successful DIY tricks are plunging, baking soda and vinegar, or a small drain snake. You can also remove the P trap under the sink to try to find the clog. If the clog persists, or you do not want to start pulling your pipes apart, your best bet is to call a licensed plumber to get deeper into the problem.
Toilet “running” or “phantom flush”
If your toilet continues to run after the tank is full, it is usually an easy fix. These problems occur when there is a problem with the fill tube, the water level float, the flush handle/flapper chain, or the flapper itself. You will have to drain the tank and bowl to perform some of these repairs, so if it looks more troublesome than you have time for, just give us a call.
When to call a licensed plumber
We recommend every homeowner have basic plumbing tools, including a heavy pipe wrench, a water meter key, an adjustable wrench, and a toilet auger. These jobs, however, can lead to much more complex problems and require specialized equipment and experience to correctly diagnose and repair. We recommend calling a licensed plumber for these kinds of jobs.
Anytime you have to take pipes apart, you should have a licensed plumber doing the work. They will be able to assess multiple factors including the age of your pipes and the exact needs for your pipes when it comes to putting everything back together again.
The sump pit, usually in the basement, collects water that drains into the house from groundwater or perimeter drains. Once water has accumulated in the pit, the pump pushes the water away from the house. Your sump pump is an easy to forget — an out-of-sight, out-of-mind appliance. You do not want to forget or ignore it. The potential for serious problems if it is not working properly makes this type of installation, maintenance, and repair best for a licensed plumber rather than DIY. You do not want to deal with a broken or improperly installed sump pump.
Gurgling sounds and water backing up in your drains, toilet, or bathtub indicate a major problem. Mainline backups require specialized equipment including a camera attached to a line to accurately assess the damage and plan repairs. The repairs often entail using digging equipment to access the damaged pipes. You definitely want a licensed plumber dealing with the wastewater rather than exposing yourself to this hazardous waste.
A failed DIY
If you get started with a DIY that turns into a nightmare, that is where we come in! Knoxville Plumbing has expert licensed plumbers standing by to help with any of your plumbing concerns. Here are a few of the most common DIY plumbing fails, according to Family Handyman. You can read details about each of these fails on Family Handyman.
10 Most Common DIY Plumbing Fails
Wrapping Thread Tape Backward or Using the Wrong Tape
Using Drain Cleaners as a First Choice
Tackling a Plumbing Job Without Spare Parts
Not Turning Off the Water
Using Too Much Muscle On a Stuck Shut Off Valve
Sweating Copper Pipes With Water in the Line
Not Having the Right Tools
Mixing up Wyes, Tees, and Elbows
Installing a Saddle Valve for an Ice Maker or Humidifier
DIY projects are a great option for many homeowners in the right circumstances. We appreciate the need to save money and the sense of satisfaction that comes from a job well done. But, if your DIY project gets out of control or if the plumbing problem is beyond your expertise, Knoxville Plumbing can help. Give us a call today!
Solar water heaters have the potential of being an ecofriendly and cost-efficient way of heating one’s household water supply. The process is simple and does just what the name implies. This type of system harnesses sunlight, turning it into heat through a device called a Solar Thermal Collector.
Direct solar water heater systems
There are several types of solar water heaters on the market. While it’s true that these water heaters can work in any climate, some do work better in warmer areas.
One of the most common types of Solar Water Heaters is called a Direct System, also known as an “active” or “open loop”. The process for the Active system is simple: Water is circulated from the water tank, up to the roof to the Solar Thermal Collectors. The water is then heated in the collectors and transferred down to the water tank and into the household, ready, for use. This type of system is best for tropical climates, as it doesn’t require assistance in heating one’s water.
The most common Solar Water Heater, in the Direct System, is the Indirect or “closed-loop” system. These work best in climates where temperatures drop below freezing. This system uses a combination of sunlight and antifreeze to heat the water. Antifreeze is circulated from the water heater up to the Solar Thermal Collectors, heated, and then moved down into the heat exchanger, heating the water in the tank, indirectly. The cooler antifreeze is then pushed back up to the collectors where the process begins again.
Common Problems with Solar Water Heaters
Probably the most common problem with a Solar Water Heater is leaking. The most plausible explanation for this is a leaky temperature and pressure relief valve on the solar heater. Do not try to repair this problem on your own. It’s better to call and have a technician come out and replace it. Another reason leaks can occur is because the piping in the solar panel has burst. This may be due to either freezing weather conditions or simply too much pressure in the pipes. It is best to call a technician to come and assess this problem as well. The problem could also be that the pipe fittings just need to be tightened.
Not enough hot water
The second most common problem is not having enough hot water. To address this issue you can do a couple of things.
Make sure the solar panel is in the correct placement on the roof, i.e. away from tree shading, facing south with the recommended tilt. Also consider if the solar panel size is correct for the household size. The amount of hot water that you use will help determine the size you need. Not having enough hot water can also be caused by a leaky or stuck valve. Make sure that if there is a back up storage tank, that the thermostat is set to the right temperature. Be mindful in the winter months that the solar panel is given an adequate slope, so the output end is higher. There could also be a system blockage. If so, all you need to do is flush the system until the flow is no longer blocked. The most important thing you can do is make sure that the solar panels are properly insulated.
No hot water
Finally, the third most often reported problem is no hot water at all. To avoid this problem, it is best to be preemptive. Make sure to maintain the absorber paint on the collector panels. If this paint deteriorates, it can cause the system to be less efficient. Make sure that the paint is both heat and UV exposure resistant. Also make sure to provide a small weep hole on the bottom of the collectors. When there is a lot of condensation inside the panels, the excess needs to be expelled so as not to affect the performance of the system.
Despite their drawbacks, Solar Water Heaters are a great option for alternative-energy conscious homeowners. If you are looking to save money, we’ve got everything you need to get you started on this eco-friendly alternative energy option for your home. Give us a call today!
Tankless or demand-type water heaters are a type of water heater that only heats up water when one needs it. They are a more cost-efficient way of heating water, because they don’t waste as much energy on heating a whole storage water tank. They are also referred to as instantaneous water heaters.
How do they work?
The way these water heaters are designed is quite ingenious. The hot water is turned on at the tap, and cold water is propelled though the pipeline into the unit. Once this happens, either an electric unit or a gas burner heats the water. This type of system practically insures that one will always have hot water available. It will produce about 2-5 gallons of hot water per minute. Keep in mind that a gas-burning water heater will yield larger quantities of flow rates than an electric-powered water heater. The beauty of this is that the demand-type water heater will do all of this without needing a hot water heating tank, saving space, money and energy in the process.
While the tankless water heater itself is more expensive than the typical storage water heater, it will usually last longer. Tankless water heaters also cost less to operate, and as mentioned before, save energy. All that counters the initial purchase price. In addition, the storage water heater only lasts about 10-15 years, whereas a tankless water heater will last up to 20. It is also easy to keep up with maintenance of a tankless water heater, because its parts are so easy to come by and usually cheap.
What are some common problems with tankless water heaters?
Running out of hot water
One of the most common problems with a tankless or demand-type water heater is that it runs out of hot water too quickly. There are several variables that one must consider when dealing with this problem. One reason this could be happening is because tankless water heaters cannot supply enough hot water when the hot water is being used for multiple things at the same time. For example, if one household is using the dishwasher, the laundry machine and the shower all at the same time, this will drastically impede the water heater’s ability to supply hot water to all three places. A simple but slightly pricey solution to this problem is to install an additional tankless water heater next to the original to help spread the hot water throughout the household. Another possibility is to install appliance-specific water heaters onto the appliances.
Mineral build-up can be another culprit. Hard water can be damaging and counter-productive for any water heater. Be sure to flush the tankless water heater about every six months or so to insure optimal usage. Consider a water softener to help keep the mineral build-up to a minimum.
Failure to ignite
Failure to ignite is a frustrating problem. This is often caused by blockage of the air supply or exhaust. Many tankless water heaters will have a display with an error code to tell that there is an air supply or exhaust problem. The demand-type water heater is most likely struggling with venting or combustion air. Make sure all the vents are clear. Look out for small animals, birds or even wasps. These creatures like to make their homes in or around the outside vents.
Flame failure is another common problem. This typically occurs from an electrical or gas pressure issue. Make sure that it is not because of an overdue gas bill or empty propane tank before calling professionals.
Give us a call if it’s time to change the way your house heats water! We have professionals standing by to help with the next chapter in your home improvement journey.
Whether your water heater broke or your family is growing, you might just need a new water heater. Choosing a new one doesn’t have to be overwhelming. Just follow these tips, and this will be one of the easiest things you’ve done!
Research How Water Heaters Work
There are a lot of different kinds of water heaters. They range from tank to tankless and can be powered by gas, electricity, oil, solar or heat pump.
The two most common tank water heaters run on gas or electricity.
Electric water heaters use coils that go down into the tank to heat your water. This type is ideal for a smaller household that doesn’t require much hot water. Although electric water heaters might be cheaper to purchase, they’re not as efficient as gas heaters in the long run. They also tend to be more expensive over time.
Gas heaters, be it natural gas or propane, are another common water heater choice. They use a gas burner that is vented through a chimney or small wall vent. Propane gas heaters are used when natural gas is not accessible. Propane tends to be cheaper than natural gas.
Above are great examples of tank water heaters, but there is another option: a tankless water heater.
Also known as the “on demand” water heater, it only turns on when you need hot water. There is no holding tank, which makes this a more efficient option. However, like the electric water heater, this also makes it a more expensive option.
You also need to consider the lifetime expectancy of the heater you choose. Where a tank water heater can hold from 40 to 60 gallons of hot water and last up to 13 years, a tankless heater can last up to 20 years.
Taking all this into consideration, it ultimately comes to what is most suitable for you and your household.
Size and Storage Of Water Heaters
You must factor size and storage into your search for a new water heater. To help with this, think back to how satisfied you were with how your old one worked. Some things to consider: Did you had enough hot water? How long did you have to wait for it to reheat?
If the old water heater didn’t provide enough hot water, you might want to upgrade the size of the new water heater.
For a storage tank water heater, a very important factor to consider is the amount of water that can be held and the recovery rate, which is basically the amount of water that can be heated in an hour. An energy sticker on the new water heater will display the recovery rate as First Hour Rating (FHR).
For example, a four-person household would require a 40- to 50-gallon water tank, whereas a two-person household could skate by with a 30- to 40-gallon tank.
Gas heaters have a better FHR than electric water heaters, which means they have a smaller tank with the same EF rating.
Choosing your new water heater doesn’t have to be a headache. Just remember: do your research on types, sizes and storage options.
If you get stuck, give us a call. Here at Knoxville Plumbing, we have experts who can help you evaluate what your family needs and match these up with the heater that will work best for you and your household.