Loading...

Follow Flex Team Inc. on Feedspot

Continue with Google
Continue with Facebook
or

Valid
Flex Team Inc. by Danielle Hayden - 2d ago
Minerva Company Seeking a 1st and 2nd Shift Furnace Operator for Full Time Employment Functions:
  • Set up, adjust and operate the belt furnace and auxiliary metal preparatory equipment to process product to specifications.
  • Handle the Start Up, Operation, and Shut Down of the furnace through the use of a PLC and manual controls.
  • Select the correct furnace recipe and enter into furnace PLC/HMI.
  • Select all furnace fixtures to run parts.
  • Maintain furnace fixtures as required.
  • Maintain furnace logs and document furnace records.
  • Setup and operate the alloy coating application machine to prepare products for furnace brazing.
  • Load and unload furnace.
  • Perform first article runs and communicate recommendations as appropriate.
  • Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety protocols.
  • Read/understand prints and information provided in the shop traveler.
  • Measure, test, and visually inspect tubes to insure they meet the print and all quality requirements.
  • Work with downstream operations to ensure product suitability.

Requirements:

  • A high school diploma with at least 1 year experience with heat treating equipment.
  • Must be physically fit and able to lift 50 lbs. plus stand for extended periods.
  • Problem Solving/Analysis skills.
  • Exercise good judgment. Able to multi-task.
  • Decision making ability and good Time Management skills.
  • Thoroughness/Attention to details.
  • Be able to read basic drawings and have the ability to perform basic calculations using shop Math.
  • Read and comprehend standard operating procedures and be willing to learn. Able to accurately use a tape measure, calipers, height gages, and other metal measuring equipment.

Preferred:

  • 3 years’ experience with a heat treating furnace.
  • 1 year experience with controlled atmosphere furnace.

Please Call Flex Team Staffing today! 330-489-9111

The post Furnace Operator – Minerva appeared first on FlexTeam Inc..

  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

Minerva Company seeking a Box Builder/Wood Worker for 1st shift! 

1st Shift: 6:00 AM – 2:30 PM

The job sets-up and operates a variety of wood working machines and uses various hand tools to fabricate wood and cardboard packaging, crates and skids.

Functions: 

  • Attach parts or sub-assemblies together to form completed units, using glue, nails, screws, or clamps.
  • Verify dimensions or check the quality or fit of pieces to ensure adherence to specifications.
  • Assist in loading, packaging, and sealing crates when time allows.
  • Operate an industrial lift truck to move crating through the shop.
  • Be able to complete the job in less time than the standard run times called out in the traveler.
  • Keep the area, machines and tooling clean and organized.
  • When time allows can make local deliveries in company truck.

Requirements:

  • A high school diploma with career center wood working training, OR ten (5) years of experience in wood construction industry.
  • Must be physically fit and able to lift 50 lbs. plus stand for extended periods.
  • Be able to read basic drawings.
  • Have the ability to perform advanced calculations using shop Math. Read and comprehend standard operating procedures and be willing to learn.
  • Have experience safety operating commercial grade wood cutting equipment.
  • Able to accurately use a tape measure.
  • Have a Mechanical aptitude with good problem solving skills.
  • Experience safety operating an industrial lift truck.
  • Problem Solving/Analysis. Results Driven.
  • Communication Proficiency. Time Management.
  • Technical Capacity in wood working processes.

Please call Flex Team Staffing today! 330-489-9111

The post 1st Shift Box Builder/Wood Worker – Minerva appeared first on FlexTeam Inc..

  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

2nd Shift, General Labor for Machine Shop in Minerva

Shift: 2:30 PM – 11:00 PM

The job performs general manual labor tasks including material handling, lifting, and using basic hand tools to

complete fabrication requirements. Operates the tube; corrugation or machine shop fabrication machinery as needed.

Essential Functions:

  • Relies on instructions and pre-established guidelines to perform the functions of the job.
  • Operate production tube fabrication equipment.
  • Read/understand prints and information provided in the shop traveler.
  • Load/unload tubes and pipes.
  • Be able to complete the job in less time than the standard run times called out in the traveler.
  • Measures and inspect tubes to insure they meet the print and all quality requirements.
  • Perform secondary operations as required during the machine process such as cutting, de-burring, nipping, straightening, testing, or washing.
  • Load finished tubes on to racks for transporting to other departments.
  • Keep the area, machines and tooling clean and organized.
  • Inspect in-process to confirm quality adherence of product.

Requirements:

  • A high school diploma or tube manufacturing experience.
  • Must be physically fit and able to lift 50 lbs. plus stand for extended periods.
  • Be able to complete the job in less time than the standard run times called out in the traveler.
  • Be able to read prints and understand drawings.
  • Have the ability to perform basic calculations using shop Math.
  • Able to check your own work using tape measures, rulers and calipers.
  • Mechanical aptitude. Hand tool proficiency. Problem Solving.
  • Time Management.
  • Customer/Client Focus.

Preferred:

  • Previous quantifiable hands on experience in a metal forming environment.

Please call Flex Team Staffing today! 330-489-9111

The post 2nd Shift Machine Operator – Minerva appeared first on FlexTeam Inc..

  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 
Flex Team Inc. by Danielle Hayden - 2d ago

Minerva Company seeking a 1st and 2nd Shift McElroy Fin Machine Technician

1st Shift: 6:00 AM – 2:30 PM / 2nd Shift: 2:30 PM – 11:00 PM

The job entails setting up and operating McElroy CNC finning machines to produce finned tubes by winding metal strip around pipes and tubes. Job entails setup, operation, troubleshooting, and maintaining the machine to perform the required products to print. The position also requires various operations to be done in the pre and post-production process.

Functions:

  • Set up and run McElroy Finning machines to manufacture fin tubes.
  • Read/understand prints and information provided in the shop traveler.
  • Determining the correct tooling, fixtures and materials required to run the job.
  • Setup and align machine using hand tools and gages to match drawing requirements.
  • Troubleshoot machine during operation and make in-production adjustments to ensure product quality.
  • Change out the components required for the tube size, fin height and type.
  • Load/unload tubes and pipes. Load coils of metal fin strip on to feeder reels/drum.
  • Run parts efficiently – to print – with a sense of urgency.
  • Be able to complete the job in less time than the standard run times called out in the traveler.
  • Measures and inspect tubes to insure they meet the print and all quality requirements.
  • Perform secondary operations as required during the Finning process such as welding, trimming etc.
  • Load finished tubes on to racks for transporting to other departments. Keep the area, machines and tooling clean and organized

Requirements: 

  • A High School diploma.
  • Must be physically fit and able to lift 50 lbs. plus stand for extended periods.
  • Mechanical Drawing proficiency. Problem Solving/Analysis.
  • Results Driven. Communication Proficiency.
  • Shop inspection equipment proficiency. Able to read and understand production documentation.
  • Time Management. Technical Capacity in metal forming processes.
  • Learning Orientation. Hand Tool proficiency – snips, files, pliers, hammers, wrenches etc.

Please call Flex Team Staffing today! 330-489-9111

The post Machine Technician – Minvera appeared first on FlexTeam Inc..

  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 
Flex Team Inc. by Brandy Preston - 4d ago

DETAIL TECHNICIANS

1st Shift

Monday – Saturday

7 am – 3 pm

Pay Rate: $10.00

Weekly Pay

Flex Team is looking for a Detail Technicians for a local Limousine Company in Akron, Ohio 1st Shift 7 am to 3 pm $10 per hour.

Immediate start for qualifying candidates.

The duties and responsibilities of the Detail Technicians will be responsible for ensuring that the up keep of the vehicles are well-maintained and are in excellent working condition for the drivers and customers.

This position consists of washing the vehicles, cleaning the interior and moving the vehicles around on the lot.

Requirements:

  • Must be 25 years or older
  • Must have a Valid Drivers’ License with Less than 2 points
  • No DUI’s or Suspensions
  • Requires slip resistant shoes

*Company may Require a Background Check*

*Must be able to pass a Drug Test

The post Detail Technician appeared first on FlexTeam Inc..

  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 
Flex Team Inc. by Brandy Preston - 4d ago

2nd Shift Machine Operator

Stow, OH

Pay Rate: $13.00 per hr.

2nd Shift

Monday – Friday

4 pm – 12 am

Mandatory Overtime

*Weekly Pay*

Flex Team has partnered with a rapidly growing Metal Coil Processor Manufacture, whose operations include large Grinding Lines that Polish Steel and Aluminum to Mirror like Finishes and they are looking to hire Machine Operators.

These products are then used in appliances, transportation and other industries.

Candidates with Auto-body repair experience are encouraged to apply and would be a perfect fit for this position

Our company is currently seeking experienced Machine Operators that have at least 1 year of Factory, Manufacturing, Production and Machine Operating experience. We are also willing to provide “On the Job Training” for entry level candidates.

Job Duties Include:

  • Machine set-up and operation
  • Following prints and specifications to assure machine is operating properly
  • Assisting in monitoring quality

Requirements

  • Good communication skills
  • Ability to read prints and understand specifications preferred but not required
  • Able to use measurement equipment including calipers, micrometers and tape measure (preferred but not required)
  • Steel toed boots required
  • Have basic math skills and able to follow directions
  • Good work history and attendance

Must be able to lift 50 lbs., stand for 8+ hours/day and walk, sit, stand, bend, scoop, kneel and crouch

*Company may Require a Background Check*

*Must be able to pass a Drug Test*

*Weekly Pay*

The post 2nd Shift Machine Operator appeared first on FlexTeam Inc..

  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 
Flex Team Inc. by Brandy Preston - 4d ago

Production Packaging Operator

Portage Lakes, Ohio

Pay Rate: $10.50 per hr.

Part – Time/Temporary

Monday – Friday

8 am – 12 pm

Weekly Pay

Local Family Owned Food Production Company located in Portage Lakes, Ohio that has been servicing Akron area bakeries, retail bake shops, farm markets and food service industries Nationwide since 1945 has several Production Packaging Operator positions available.

The Production Packaging Operator positions available are for hard working individuals who are used to manual labor and enjoy staying busy while producing high quality food products.

The Ideal Production Packaging Operator must have 1 year of recent Industrial Manufacturing packing experience.

Must be able to perform the following duties: Operate industrial Mixers and Blenders and Must able to lift 10-25 lbs. repetitively.

If you are interested in this Production Packaging Operator position please submit your resume that reflects one year of recent manufacturing experience

MUST HAVE AT LEAST 1 YEAR OF RECENT FACTORY PRODUCTION EXPERIENCE

*Company may Require a Background Check*

*Must be able to pass a Drug Test*

*Weekly Pay*

The post Production Packaging appeared first on FlexTeam Inc..

  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

Machine Operator

Brimfield, Ohio

Pay Rate: $11

Weekly Pay

*Must be available to work Overtime*

International Printing Press Factory in Brimfield, Ohio are looking for Bright, Caring, Energetic New Talent to join their team because they believe that their future is critically important to the growth of the Company and this is why they need you!

We are looking for Machine Operators to set up and maintain small bindery production machines and equipment. The use of Drills, Palletizers Polybagged and other small machines in our Production Bindery Department are required to complete bindery operations is a part of this job.

Duties and Responsibilities of the Machine Operator(s):

  • Operate all tools pertaining to equipment, wrenches, gauges and tape measures
  • Monitor machine operations, detect malfunctions to determine whether adjustments are needed
  • Perform routine maintenance on equipment as needed

Requirements of the Machine Operator(s):

  • High School Diploma or GED
  • Must 1-3 years of job-factory, production, or manufacturing work experience
  • Available to work 10 to 12-hour shifts

*Company may Require a Background Check*

*Must be able to pass a Drug Test*

*Weekly Pay*

The post Machine Operator – Brimfield appeared first on FlexTeam Inc..

  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 
Flex Team Inc. by Brandy Preston - 4d ago

1st Shift Machine Operator

Stow, OH

Pay Rate: $13.00 per hr.

Monday – Friday

7 am – 3:30 pm

Mandatory Overtime

*Weekly Pay*

Flex Team has partnered with a rapidly growing Metal Coil Processor Manufacture, whose operations include large Grinding Lines that Polish Steel and Aluminum to Mirror like Finishes and they are looking to hire Machine Operators.

These products are then used in appliances, transportation and other industries.

Candidates with Autobody repair experience are encouraged to apply and would be a perfect fit for this position

Our company is currently seeking experienced Machine Operators that have at least 1 year of Factory, Manufacturing, Production and Machine Operating experience. We are also willing to provide “On the Job Training” for entry level candidates.

Job Duties Include:

  • Machine set-up and operation
  • Following prints and specifications to assure machine is operating properly
  • Assisting in monitoring quality

Requirements

  • Good communication skills
  • Ability to read prints and understand specifications preferred but not required
  • Able to use measurement equipment including calipers, micrometers and tape measure (preferred but not required)
  • Steel toed boots required
  • Have basic math skills and able to follow directions
  • Good work history and attendance

Must be able to lift 50 lbs., stand for 8+ hours/day and walk, sit, stand, bend, scoop, kneel and crouch

*Company may Require a Background Check*

*Must be able to pass a Drug Test*

*Weekly Pay*

The post Machine Operator – Stow appeared first on FlexTeam Inc..

  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

Experienced Industrial Painter is needed ASAP for local Massillon company

Train on 1st shift then MUST be able to move to 2nd shift. Company works 4 10 hour days

Industrial Painter/ Blasters requirements:

  • Past experience in Industrial Painting/Blasting required
  • Able to get and pass a fit test
  • Perform a variety of routine and preventive maintenance painting duties, such as high steel and structural steel painting, sand blasting, powder blast and preparation for enamel, epoxy, bitumanstic, and latex painting
  • Prepare and paint a variety of surfaces including, aluminum, ferrous metal, interior drywall, woodwork, shop coated metal, un-coated metal, finished hardware, accessories, light fixtures, plates, and other surfaces as specified; protect and prime surfaces as appropriate; apply finish coatings to Mil Spec requirements

Please Submit Resume with current work experience for consideration to Flex Team Staffing! 330-489-9111

The post EXPERIENCED Industrial Painter – Massillon appeared first on FlexTeam Inc..

Read for later

Articles marked as Favorite are saved for later viewing.
close
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

Separate tags by commas
To access this feature, please upgrade your account.
Start your free month
Free Preview