Loading...

Follow A&J Automotive on Feedspot

Continue with Google
Continue with Facebook
or

Valid
What to Look For

If the check engine light comes in your vehicle, it can be a stressful moment. Questions and doubt quickly fill the mind, and it can be difficult to determine what to do next. At A & J Automotive, we want to help you understand this pesky signal. Although the check engine light can be vague in nature, it does provide enough information to create a plan of action. If you ever see this warning signal in your vehicle, pay attention to these small hints! They could be the difference between a failed or functioning vehicle.

Steady or Flashing?

When the check engine light is on, first pay attention to how it’s lighted. Is it steady or flashing? This information helps you understand how to proceed.

If the light is steady, there is a minor problem within your vehicle. Although your vehicle is okay for the moment, continuing to drive it could cause additional damage. Make sure you schedule an appointment with us soon so the problem doesn’t worsen.

If the light is flashing, there’s a major problem within your vehicle. In most cases, a flashing engine light indicates a misfiring engine. This can seriously damage, or even destroy, your vehicle’s catalytic converter so it’s important to schedule a visit ASAP. If you continue to drive your vehicle, it could suffer from serious engine failure or even catch on fire!

Red or Orange?

Along with observing how the signal is lighted, also pay attention to the color. Some vehicles utilize colors to inform motorists of the severity, and it’s important you understand how to proceed. If you see the light is lit with a yellow/orange color your vehicle is fine for the time being, but we recommend service at your first convenience. If you see a red light, that indicates something is seriously wrong and you will need to visit our shop ASAP! These colors represent the steady and flashing engine light respectively!

Check the Gas Cap

If the light is orange and/or steady, check the gas cap, as a loose cap is a common trigger for the light. You may need to tighten or replace it, and many auto parts stores sell these cheap. Once either action is completed, drive your vehicle for a few miles and see how the light responds. If it shuts off, great! Your vehicle is engine light free! If not, then you’ll need to schedule a visit with our auto professionals to determine the cause.

Whether the light is steady or flashing, make sure you schedule a visit with A & J Automotive in Raleigh, North Carolina! Our auto professionals use the latest diagnostic and repair equipment to quickly find and fix the cause of the check engine light!

The post How to Approach the Check Engine Light appeared first on AJ Auto Repair.

Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 
Things You Need to Do

Due to its vague nature, the check engine light is one of the biggest stress-inducing vehicle warnings we can get while driving. When this warning signal goes off, it’s important to understand the appropriate steps needed to ensure your vehicle sustains the least amount of damage possible. These practical steps, recommended by the automotive professionals at A & J Automotive, will ensure that your vehicle is properly functioning when you visit our shop. Here’s what you need to do when you see the check engine light turn on!

Understand the Severity

When the check engine light turns on, first recognize how the light is shining. Is it a yellow, consistent light? Or is it a red, blinking light? If it’s the former, that means something minor has happened to your vehicle and it will need auto service at your earliest convenience. If it is the latter, that means a major problem is occurring with your vehicle and it needs auto care as soon as possible. If you continue to drive with the latter, you could cause further damage to your vehicle and ultimately experience vehicle failure!

Try to Determine the Problem

If the light is not blinking, do your best to determine the problem. The first thing you need to check is the gas cap. Make sure that it’s tightened or replaced and drive for a little bit. If it is the cause, the light should turn off. If it isn’t the cause, there is a bigger problem at hand. One of the easier ways to determine a problem is by utilizing an OBD II Scanner. This tool reads the codes sent by your computer system and translates them for you. These tools can be a bit pricey depending on what you get, but should quickly inform you of what the problem is. The only other accurate way is to visit our shop. We’ll utilize not only an OBD II scanner but our experience to accurately determine the cause of the check engine light.

Visit Our Shop

To avoid any further damage, it’s best to have your vehicle serviced as quickly as possible (especially if the light is blinking). Unless the cause of the check engine light is a loose gas cap, you will be better off having your vehicle serviced by the automotive professionals at A & J Automotive. Our ASE Certifed technicians will work with you to handle any issue your vehicle may have, whether it’s a worn spark plug or an old battery. Give us a call at 919-439-6495 or use our convenient online scheduling system to book your next engine light visit with us!

The post Handling the Check Engine Light appeared first on AJ Auto Repair.

Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

It is important that an individual can recognize if there may be a problem with his or her vehicle, which can save time and money if a repair needs to be made. A radiator is an integral part of a vehicle that helps it run smoothly. With the right maintenance, it should run without problems for a few years. If a vehicle’s radiator goes bad, then it could have an impact on the entire automobile. A radiator keeps an engine cool and functions by removing the excess heat that accumulates when the vehicle’s engine burns fuel. If an engine is not able to stay cool, then it can lead to other problems including transmission failure. Here are some common issues that can identify if a radiator needs maintenance or replacement.

There Could be a Leak
One common sign a radiator is going bad is if it is leaking coolant, which can be caused by a crack. If there is green liquid found under a vehicle, then the radiator should be inspected to identify the area where the leak is present. A mechanic can perform a pressure test to determine the source of the leak. If the leak is not too big, then a mechanic can patch is or replace the broken part. A radiator hose can also be the source of a leak that is easily identified. More than likely if there is a leak, then it is located in the hoses. An individual can look to see if any steam is coming out of the radiator, which will identify the location of the leak. In order to keep a radiator running smoothly, it is important to replace hoses on a regular basis.There Could be Rust
If there is rust present throughout the radiator, then it could cause significant damage to a cooling system. When a piece of rust falls into the engine, it can produce a thick liquid when it is mixed with the coolant, which will not cause the engine to cool. When this occurs, the radiator must be flushed in order to remove all the coolant that has acquired rust. Rust mixed with coolant produces a sludge that can lead to corrosion.

Overheating is a Sign of Radiator Problems
A radiator works by reducing the engine’s coolant before it circulates through the engine, which can loose effectiveness throughout time. When this occurs, an engine will run at a higher temperature than normal. Over time, this could lead to the engine overheating. A thermostat is present in an engine that records the coolant’s temperature. If the temperature gets too high, then a signal will be sent to your gauge. If an individual is driving and notices the temperature of the coolant reading too high, then it is important he or she pulls over and allows the the engine to cool. If an individual continues to drive, it could cause the engine to overheat.

A Thermostat Goes Bad
Another factor that can lead to radiator problems is if a thermostat fails. Although the thermostat is not part of the radiator, it is vital in helping the radiator function properly. The thermostat is one of the most common factors that leads to an engine overheating. If the thermostat fails, then the vehicle will start to overheat at a rapid pace.

Air is Present in the Cooling System
There are instances when air can become trapped in the cooling system. If this occurs, then it will prevent the coolant from flowing properly, which will result in the coolant not working like it should. If a vehicle is running hot due to trapped air, then a mechanic can remove air bubbles that accumulated in the cooling system.

The Water Pump Fails
If a water pump fails, then the cooling system will not be able to pump the coolant throughout the engine and regulate the temperature properly. As water travels through the radiator, it goes into the pump and the engine and then moves back into the radiator. When the water pump fails, then a vehicle will more than likely overheat because the circulation is no longer functioning effectively. A failed water pump is common among radiator problems.

An Obstruction in the Cooling System
If there is an obstruction in the cooling system, then it will block the the cooling passages. When the engine and radiator do not receive the right flow of coolant, then it it can cause radiator problems. Obstructions can also happen if air is restricted to flow through the radiator. When air is not able to flow through the radiator, then the radiator will not be able to properly transfer heat to the air.

If there are signs that your vehicle is overheating due to radiator problems, then it is vital to locate and repair the problem quickly. If a faulty radiator is not repaired, then it could also cause damage to the transmission. If you feel you’re experiencing any of the issues above then contact A&J Automotive today to schedule an appointment

The post How to Determine If Your Radiator Should Be Replaced appeared first on AJ Auto Repair.

Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

Trivia And Art

Fans of the popular television game show Jeopardy occasionally learn about items of automotive trivia or general fun facts. One of the questions posed on the television show recently introduced a large viewing audience to a one-of-a-kind landmark with strong connections to the American auto industry: Carhenge. This unique landmark demonstrates the creativity of car lovers. It also suggests a close connection sometimes exists between modern art and popular culture.

If you’ve considered planning a summer vacation out West this year, you may want to pay a visit to an unusual site erected by an artist as a tribute to his late father. Free to visit, this memorial today draws visitors from around the world. Large numbers of tourists will travel there to view a solar eclipse on August 21, 2017.

A Modern Tribute to The Past

Carhenge provides an exact replica of a famous ancient British landmark called “Stonehenge”. Artist and engineer Jim Reinders and his family members created it from automobiles. They used the bodies of the vehicles in lieu of stones.

The monument sits in the middle of an empty farm field just a short distance north of the small town of Alliance, Nebraska. Located in the far western portion of the Cornhusker State in a rural location, the interesting site remains open to the public on an admission-free basis during daylight hours throughout the year.

An Unusual Landmark

In 2017, Carhenge will celebrate its 30th anniversary. Some 35 members of the Reinders family erected the monument in 1987 in honor of Jim Reinders’ late father, who had once farmed in that spot. They used 39 automobiles to mimic the large boulders forming Stonehenge, arranging them in a circle and placing car bodies in the site of specific central stones still visible at the ancient Druid monument. The builders buried upright vehicles trunk-first in deep pits of earth, and welded overarching autos and trucks in place to form a permanent memorial. To help safeguard the structure from rust and enhance the resemblance to Stonehenge, the Reinder family eventually spray-painted all of the vehicles in gray. They also made a point of using only American-manufactured auto bodies in the current landmark.

Over the course of time, other artists donated pieces of car body art to a nearby portion of the site called the “Car Art Reserve”. Some of these works depict natural themes, such as the changing seasons of the year. Jim Reinders eventually donated the location to a preservation group called “Friends of Carhenge”, who in turn entrusted the attraction to the Citizens of Alliance in 2013.

Similar Efforts

Interestingly, other artists in the past built similar reconstructions of Stonehenge using vehicles. For instance, William Lishman also relied on auto bodies to mimic the ancient monument when he constructed “Autohenge” in Canada in 1986. Sadly, afflicted by severe weather which rusted the metal, his work suffered demolition in 2001.

From 1996 through 1997, a traveling display called “Dubhenge” consisting entirely of scrapped Volkwagens arranged in a Stonehenge-like pattern visited several cities in the British Isle. Originally built for a summer solstice celebration at a racetrack, the art work drew enthusiastic crowds from Glastonbury to Leeds. Today Carhenge outside tiny Alliance, Nebraska has become the longest-lasting car art replica of Stonehenge. It draws around 60,000 visitors annually.

Prepare For Interesting 2017 Travels

When you need to obtain maintenance or repair services to prepare your vehicles for the road during 2017, pay a visit to A&J Automotive in Raleigh, North Carolina. We’ll help you keep your auto in great shape so you can travel near (and far) with greater confidence!

Schedule an appointment today!

The post Carhenge: The Automobile as an Art Form appeared first on AJ Auto Repair.

Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

Each and every day, we depend on our cars. Without our cars, we wouldn’t be able to get to our jobs on time or pick up our kids. It is important to remember that there are many signs that you can use to detect when it is time to repair your car. When it comes to repairing your car, there are many new technologies that are being used in auto repair shops around the world. These new technologies are cutting down on the cost of repairs and lengthening the lives of cars on the road.

There are new microcomputers on the market that are making diagnostics much more efficient and accurate than before. Many of these computers are being used to determine just what the problem in an engine, electrical system, or other feature of a car really is. This accuracy helps auto repair shops determine exactly what the problem is right from the beginning. This helps to cut down on diagnostic costs and the time it takes to repair a car. There are also small automotive computers that are available for those who are working on their auto repairs themselves.

Aluminum is a material that is making auto repair easier than ever before. Aluminum was once a material that was only available to the highest end luxury car buyers in the past. However, aluminum technology has become much more affordable. Many newer cars are now using aluminum technology that was once reserved for military purposes. This has made auto body repair much less expensive and time effective. Where auto body repairs used to take many weeks, there are some aluminum repairs that can be done in a matter of days. With the implementation of this new aluminum technology, auto repairs are becoming much less devastating than before.

One of the greatest developments in automotive technology lately is the implementation of wireless technology. Cars are now becoming moving wi-fi hotspots. This is great for logging onto the internet and getting some extra work done. This can also be a very important tool for auto repair as well. There are many dealerships that are now working on tools that would be able to diagnose an automobile through the aid of its wi-fi capabilities. This would mean that drivers wouldn’t have to bring in their car in the future if they had an unsettling rattle during idle. Dealerships and auto repair shops could simply log onto the car’s wi-fi network and determine the root of the problem. While this may seem like science fiction, dealerships and auto repair shops are investing resources to make this a reality as soon as possible.

Body panels are a new technology that has really changed the way auto body repair may be done in the future. These body panels were originally thought up to create the ultimate in crossover vehicles. However, having replaceable body panels could make auto body repairs much more inexpensive in the future.

New USB borescopes are making it easier than ever for those who want to diagnose their car at home. With the aid of your laptop, you will be able to use a long bendable tube with a camera on the end to get into the hard to inspect places. This will give you the ability to dodge costly diagnostic costs at auto repair shops. Borescopes are becoming much less expensive than they have been the past. At well under $100, you will be able to have a tool to inspect your car time and time again. This is a great investment that can pay off big in the long run.

The post New Technologies Moving the Auto Repair Industry Forward appeared first on AJ Auto Repair.

Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

Most drivers are familiar with the most common problems in their cars. They change the oil on a regular schedule and have their vehicle examined for common problems of wear and tear. But there is one very common problem which can quickly lead to fatal damage to any car: worn gaskets. Throughout any car, rubber and plastic gaskets are required to make the proper seals necessary to keep water out and fluids in. However, these gaskets are subjected to intense heat, as well as significant variations in temperature and humidity, which will over time cause them to fail. These failures can let water in to cause mildew damage, allow oil or other fluids out to cause heat damage or enable water to rust and short out critical electrical contacts.

It is essential, therefore, to ensure that all of your gaskets are in proper working order and that worn gaskets are replaced as soon as they are spotted. Fortunately, this does not mean going around the car and dismantling large pieces of it to check the gaskets. Instead, it is only necessary to check the vehicle for evidence of gasket failure, i.e. the presence of liquids where they should not be. This is an easy process that can be performed without any mechanical knowledge whatsoever, by any layman with a good eye and a few spare minutes. Conducting this check once every few weeks will let you know if any gaskets are failing or have failed, and then you can go to your mechanic, dealership, or turn to yourself to have these gaskets properly replaced.The first sort of check requires a good rain, or failing that, a quick car wash. The purpose of this is to ensure that all gaskets around the doors, trunk, hood and other areas are keeping water out. If you are washing the car yourself, it may be a good idea to run the water against any gaskets you suspect of wear for up to a minute to allow it to permeate through any possible cracks. After the rain or wash, it is then a simple matter of checking the interior of the vehicle for any wetness. If you have any doubts, or if you know an area will be hard to check for wetness, it’s a good idea to put down some butcher paper, old newspaper or paper towels, which will absorb any moisture and make it readily apparent. Likewise, when dealing with small areas (especially under the hood), a quick wipe with a paper towel will let you know if any gasket is failing.The second sort of check requires only time and a good eye. In the past, it was not unusual for even brand-new cars to drip oil, antifreeze or other liquids onto the garage floor beneath them. However, for both safety and efficiency reasons, modern engines only leak fluids when something is wrong with them. Therefore, it’s a good idea to keep a fresh piece of white cardboard under your engine and transmission and check it regularly for the appearance of stains. If such stains appear, replace the cardboard, and if they reappear, it means you’ll need to start looking for a leak. It’s important that the cardboard is fresh, since small amounts of oil, gunk, grime and other road mess will always accumulate under the car and then drip off over time, and are not necessarily indicative of a failed gasket. Likewise, you can’t expect the leak to appear as a noticeable puddle, especially if it is of a low viscosity liquid such as gear grease or axle grease.

When you find a worn or destroyed gasket, there is a high likelihood that you will be able to replace it yourself, or that it will be relatively inexpensive. Most gaskets cost only a few dollars and are designed to be easily replaced with standard tools. Some will be harder to reach, and it may be necessary to hire a mechanic for those located in and near the engine bay, but the primary cost will be labor, not parts. Replacing these gaskets when they get worn will prevent damage due to lack of lubrication, the growth of mildew in undesirable places, and even many electrical problems.

When in doubt the best thing to do is to hire a local engine repair specialists like A&J Automotive. They have the experience and trained auto repair experts to handle a variety of repairs that require replacement of worn gaskets. This would include everything from a thermostat replacement to a blown engine head gasket.
If you have any urgent needs you can Schedule An Appointment Here

The post Worn Gaskets: The Cheap Problem That Costs a Fortune appeared first on AJ Auto Repair.

Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 
Cars and technology have been fantasized about for decades now, between James Bond and Batman, people have imagined all sorts of gizmos and gadgets to make their vehicle cooler. In the last few years, there has been a huge rise in the technologies that are implemented in automobile design. From ensuring safety to making your car as aerodynamic as possible, technology is being used in fascinating ways, and this is the top 5 coolest uses of technology in automobiles.Audi TT Spoiler
Spoilers function by redirecting wind flow to increase handling and control by keeping the car on the ground. The spoiler actually uses the air rushing over the car to force the car lower. The Audi TT spoiler deploys itself at speeds over 75 miles per hour and retracts when the car goes below 50 to ensure the driver has optimal control of the vehicle. The function of the spoiler also looks like something out of science fiction.

Gesture Controls
Fiddling with the radio has definitely caused a few crashes in the past. You’re looking down, trying to find that one song you used to jam out to, and you move just a little out of your lane. Fortunately, technology has traveled ahead of you to solve this type of problem. A small camera in front of your console captures your movements and reads it to your system telling it what to do. No more button fiddling, and no more reaching over to make it happen. Simply hold your hand out and use slight gestures with your fingers to make the volume go up or down or channels go back and forth.

Mirror Free Cars
In this case I am not referring to that old rusty truck your grandfather used to own. Companies like BMW have developed concept cars that actually use wide angle cameras and monitors to capture the views previously shown in your rearview mirrors. The monitors are placed where the old mirrors used to be and produce real time footage of what is going on around your vehicle. This technology actually increases the view of drivers because the cameras are able to capture more than the old mirrors where capable. This new technology may be seen in vehicles sooner than you might think. Japan has passed laws allowing the production of this type of vehicle, and Europe seems to be soon to follow suit.

AutoPilot
Yes, seriously. Autopilot functions are currently being beta processed in the Tesla line and have shown some very promising results. The Auto Pilot mode of the vehicle will actually speed up, slow down to a stop, shift lanes, and keep you in a specified lane. Because the software is not completely developed as of yet, Tesla warns any users to make sure and keep both hands on the wheel as if they were not being assisted. This type of technology, even in its beta stages, offer an entirely new level of safety. There are now two drivers watching the road at all times keeping all passengers away from dangerous situations. For example, those moments when you glance away from the road only to glance back just in time nearly missing the semi truck ahead of you. Those types of situations will be greatly alleviated with systems like auto pilot to assist in driving. Like KITT from Knight Rider, cars are becoming more like robotic assistants than shuttles to get you back and forth to work.

Heads Up Display
Heads up displays are not only cool but very functional. In the 80s, this type of technology was purely science fiction. In the 90s, there may have been a clock that used it as novelty. Now in many new 2017 models of high end vehicles, there is functioning holographic displays of your speed displayed on your windshield. This type of technology gives you the advantage of not having to glance down at the speedometer to assure you are not going too fast. That split second your eyes are not on the road is a breeding ground for disaster. Deer, other cars, and a million other causes of a crash could be waiting to cross the road at that very moment. The more your eyes are on the road the better off you will be.

Infrared Cameras
This military type technology, often used in night vision scopes or goggles, is now being used in vehicles to help prevent late night accidents. Your headlights on high may not give you enough time to pick up an animal in time to stop so that you do not have an accident. However, night vision technology can map out heat signatures from further off and tell you if you are in danger. Deer are the cause of one million car accidents each year. If there is a possible solution to this problem, it should be exercised to the fullest extent.

Cars are becoming more and more technologically advanced. The modern car is packed full of gadgets to keep you safe. We all want to feel a little like Batman, and thanks to cars like the Tesla, the 2017 BMW line we finally can.

The post New Technology in Cars Making the Roads Safer appeared first on AJ Auto Repair.

Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

From their trucks and SUVs to their compact cars, Toyota is a brand that carries a certain amount of dependability with it. This is the main reason people invest so much money when they purchase a Toyota automobile.Like all vehicles, Toyotas are vulnerable to certain issues. By engaging in the proper maintenance or opting for the right repairs, many of these problems that could potentially be catastrophic could be avoided altogether.

Let’s explore some of the most important things that Toyota owners should know about their automobiles.

1. Where Can You Find Your VIN?

From recalls to warranty issues, your vehicle identification number (VIN) is going to be one of the most important pieces of information that you can acquire.

While most drivers know that their VIN can be found on their insurance cards and vehicle registrations, there may be certain situations where neither of these are present.

The VIN on a Toyota automobile is located at two locations:

  1. On the dashboard near the bottom of the windshield on the driver’s side
  2. Inside the driver’s side doorjamb on a sticker

2. Problems with Speed Control and Oil Consumption

Toyota Camrys and Corollas are known for problems with speed control and excessive oil consumption. These problems are generally related to problematic seals and gaskets, defects in linkages, or another issue that extends to these systems.

Both of these issues can reduce the safety of your car while causing problems with emissions. A mechanic can generally solve these issues with a small amount of time and work, which in turn can prevent an accident from happening.

3. Defective Exterior Paint

This issue extends to all models of Toyota vehicles. The exterior paint may be defective, which in turn leads to a heightened amount of wear and tear on the vehicle’s exterior. While this is a relatively easy fix, allowing the paint to remain defective could compromise the integrity of your vehicle’s exterior in ways that require entire exterior panels to be replaced.

Defects in exterior paint generally result from a lack of clear coat or improper preparation of the base coat surface. This can result in paint that bubbles, peels, chips or simply washes away over time.

Refinishing the areas where paint issues exist will generally solve these problems.

4.Transmission Issues

Toyota vehicles can sometimes have issues with their transmissions. This can range from difficulty shifting gears to catastrophic failure of the transmission, which in turn can affect other parts of the drive system while hindering safety.

It is generally a good idea to follow your vehicle’s schedule of transmission-related maintenance, which includes changing the transmission fluid. This will keep the wear on the transmission minimal, which will help prevent transmission problems from arising.

If you notice any problems with your Toyota’s transmission, then do not hesitate to seek the help of a mechanic.

5. Early Airbag Deployment

Another issue present in Toyota vehicles is the tendency for early airbag deployment. This tends to occur in the case of minor taps, running over certain types of bumps and other situations where an airbag should not be deployed.

This issue can represent a safety risk, as the airbag could deploy when driving at high speeds. This could result in loss of control, obscured vision and injuries.

Many vehicles with severe issues of early airbag deployment will have a safety recall or notice posted. Affected vehicle VINs should accompany these posts.

If you encounter problems with your airbag, then do not ignore them. Have the airbag and, if need be, the entire SRS system checked to ensure that there are no other hidden issues with the vehicle.

6. Power Steering Hose Leaks

While this issue affects older Toyota vehicles primarily, it can affect newer models. The powering steering hoses may leak, which in turn may allow fluid to be lost.

As this fluid diminishes, steering the vehicle will become progressively harder. The power steering system may fail entirely given enough time, which in turn can represent a drastic increase in steering difficulty that could hinder safety on the road.

Routinely having your power steering hoses inspected for wear and tear, and changing the power steering fluid will help to ensure that no problems persist with the power steering.

Owners should be able to change the power steering fluid themselves. The type of fluid and amount can generally be found within your owner’s manual. If you do not feel comfortable changing the fluid or performing any other maintenance on your Toyota, then take it to a mechanic in Raleigh, NC.

Prevent Problems by Seeking a Mechanic

While Toyota makes dependable vehicles, problems may exist with these vehicles. By engaging in proper maintenance and repair, watching for recall notices, and repairing issues before they escalate, you can keep your vehicle roadworthy.

If you notice anything peculiar with your Toyota, then don’t be afraid to Contact Us. We can inspect your car, make any necessary repairs, and get you back on the road with a sense of security.

The post 6 Things Every Toyota Owner Should Know appeared first on AJ Auto Repair.

Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 
Gasoline represents one of the most convenient forms of fuel for automobiles. Other methods of fueling a car such as charging an electric car’s battery can take hours, where refueling a gasoline-using car takes but a few minutes.The problem is that gasoline can be incredibly harmful to your automobile when it breaks down. It can create a thick varnish that can clog the finer components of your car, which can lead to everything from rough idling and a loss of power to the inability to start your automobile.Let’s take a look at some of the problems old gasoline can cause and what you can do to remedy them.What Problems Can Old Gas Cause?

As gasoline sits within the fuel system of a car, it tends to turn into a thick varnish that coats and clogs various components within your car. Carburetors and fuel injectors tend to be the most vulnerable to this due to the nature of the small jets within these components.

When these components become clogged, the entire vehicle begin to runs poorly. It may miss, have trouble accelerating, lose power, cease idling, or refrain from starting in the first place.

Other areas where old gas can become a problem pertains to the fuel pump and fuel sensor. Old gas can turn into varnish, which in turn can diminish the ability for these components to function. Your vehicle may be unable to read the fuel levels in your car, strain while trying to pump more fuel from the tank to the engine, or cease to function due to a stoppage of fuel flow.

The last major area where old gas becomes a problem is within the engine cylinders. Varnish tends to turn into carbon, which in turn sticks to the walls of the cylinders. This buildup increases friction, which increases the wear of your vehicle’s engine and reduces fuel efficiency.

What Can You Do About Old Gas?

There are a number of ways that you can prevent old gasoline from affecting your automobile Using premium or super premium unleaded gasoline tends to reduce carbon buildup due to the higher octane rating of the gasoline.

Another thing you can do is to add fuel stabilizer to your gasoline. This helps to prevent the gas from breaking down into varnish, which is especially useful when the automobile is going to sit for a few weeks to years without being driven.

If old gasoline becomes a problem, then fuel system cleaners are seldom able to fix the problem. The components must be taken apart by a mechanic, cleaned, and replaced when cleaning is not adequate to restore any lost functionality.

If your Acura, Chevrolet, Ford, Honda, Lexus or Toyota automobile shows the signs of fuel system problems, then the first thing you should do is to give us a call at A&J Automotive.

By calling (919) 431-9595, we can schedule you for an appointment to diagnose your car’s condition while giving it the maintenance it needs to run free from common problems like old gasoline issues.

The post How Old Gasoline is a Threat to Your Car Engine appeared first on AJ Auto Repair.

Read Full Article
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 
Taking care of your vehicle is important because it helps you avoid future problems and breakdowns. It will surely give you peace of mind and allow you to drive your car for a much longer period of time. Proper maintenance of your car engine can also improve gas mileage.
The Facts
Vehicle fluids like transmission fluid, course fuel, motor oil, brake fluid, rear end oil, power steering fluid and anti-freeze play essential roles in the operation of your car engine. Therefore, make sure the fluids are always at the right level. Without motor oil, your engine would definitely have many problems. Oil keeps all the engine parts lubricated and lack of engine oil causes friction, which damages engine components.Another important vehicle fluid is the engine coolant, which keeps the cylinder head and engine block cool. Without the coolant, your engine would be ruined because of overheating.Brake fluids allow you to stop the vehicle while transmission fluid initiates a smooth backward and forward movement. Power steering fluid allows you to turn your steering wheel freely. Your drive axle will turn freely with the right amount of rear end oil. Generally, you should lubricate the suspension with grease to prevent mechanical problems.Features
Vehicle maintenance involves filter service. Vehicle filters include fuel, oil, and transmission fluid filters. Be sure to clean your car’s air filter on a regular basis. Unclean filters will affect the performance of your vehicle. It is advisable to change oil after about 3000 miles to 6000 miles.

Considering oil is the lifeblood of your vehicle, you should only buy quality oil. There are different types of oils available in the market including light oils, partial synthetic, and full synthetic among others.

Time Frame
Engine fluids may be filled to the right level, but they will not be very efficient if they stay in the engine for too long. Vehicle fluids like oil must be changed regularly because they break down with time. Fuel is available in different grades ranging from 87 to 93 octane. It is important to use the right fuel grade on your vehicle. In addition, use a fuel injector cleaner after specific period. Fuel becomes stale as it ages no matter where it was stored. Consider buying gas from trustworthy filling stations to ensure the fuel you buy is fresh.

Expert Insight
Giving your car proper maintenance will make it last longer. Car maintenance should involve taking care of both the exterior and interior components of your car and often involves applying paint protection, waxing, and proper cleaning. In addition, ensure your car tires have the right pressure and that the front end is well aligned to ensure your car suspension and tires last longer. Protect your car from breakdowns by using clean fuel, oil, and air filters.

Misconceptions
Most people think that any type of fuel is suitable for a car. This is not accurate because there are different types of fuel each with its own function. 93-octane fuel is recommended for high performance engines. However, 87-octane fuel will still work on a high performance engine but it may not start the engine properly. It may also waste your fuel by running rough or misfiring.

Poor maintenance of fuel filters may lead to clogging. This will lead to the accumulation of contaminants in your fuel system, which will slow your engine down and ruin it. However, you can buy quality oil filter, which does not clog easily. Flushing out your cooling system and radiator is also important. Without proper flushing, your system will be clogged, hindering proper flow of the oil, which leads to over-heating.

Car Maintenance Checklist
Car maintenance procedures differ depending on the vehicle’s brand, model, engine construction, and drive train. It is important to consult your car manufacturer or vehicle maintenance technicians to determine the specific maintenance procedures your vehicle requires.

Engine and Drive train Fluids
Check you vehicle’s brake fluid, engine coolant, hydraulic clutch fluid, and power steering fluid regularly. Examine the rear and front wheel differentials as well as the transfer case on four-wheel drive vehicles. Change these fluids at regular intervals.

Engine Wear Points
Most engine parts begin to fail after considerable periods of use. These parts include breather elements, spark plugs, air filters, and PVC valves. Regularly check these components and repair them when necessary. Consider replacing them altogether if they are significantly worn out.

Chassis Maintenance
Consider maintaining important parts of your vehicle’s frame and body. Check the pads, drums, tires and brake calipers and replace them where necessary. Changing your tires regularly will increase tread life.

Service Intervals
The automatic transmission fluid should not exceed 100,000 miles before it can be changed. Failure to change the automatic transmission fluid regularly may lead to engine damage. Whenever you perform a filter or full oil change, check your engine components to ensure everything is in the best condition possible.

Although many of the required maintenance tasks mentioned can be performed by an educated consumer with auto know how, it’s highly recommended that you contact and  hire a local Raleigh auto repair company.

The post Everything You Need to Know About Vehicle Maintenance appeared first on AJ Auto Repair.

Read Full Article

Read for later

Articles marked as Favorite are saved for later viewing.
close
  • Show original
  • .
  • Share
  • .
  • Favorite
  • .
  • Email
  • .
  • Add Tags 

Separate tags by commas
To access this feature, please upgrade your account.
Start your free month
Free Preview