I checked my tire pressure yesterday at they're sitting at 10PSI. I thought that seemed kinda high. Where should they be at for normal/aggressive trail riding? They are just the stock wheels ..read more

I have a 2012 Outlander 1000XT. Replaced ALL bearings, replaced bushings an replaced fuel pump completely. I try to start, it turns over, can hear the fuel pump engaging, but doet fire up.. After 3 tries, the forth try the engine light comes on, eventhough it is not running What could that be, I’m lost ..read more

Just installed 2” rox risers. Not as easy as it should be. Throttle by wire is not long enough and brake line is not long enough. throttle wires. The wires need to be extended or an extension harness installed 4” will do. I soldered wires in to make my harness long enough. I added 5.5 inches a wire. Two pairs are twisted for data networking. Spliced mine low near the plug. Soldered shirk wrapped. Used the stuff with glue in it. Then put liquid electrical tape over that just for added... 2022 renegade 2”risers ..read more

2012 Can am Outlander 800R Camo DPS Power Steering With 3 Settings Min/Med/Max, Selectable 4X2 / 4X4 Drivetrain, Fuel Injected, 4-Stroke Engine, Hydraulic Disc Brakes, 51” Wheel Base 46" Wide, Comes With A 20” Light Bar, Brand New Winch Cable, ITP 27” Blackwater Tires With Good Tread Life Left, Heated Grips And Thumb Throttle, Removable Tool/Gun Holders, Tire Pump, Highway Legal Road Package That Includes Mirror, Horn, And Lighted License Plate Holder. I have 3 keys for the machine to... 2012 Can am Outlander 800R Camo ..read more

Hey everyone, I'm new to the forum but not to atvs. Married father of 2 and 1 grandson. I recently traded for a 2018 Can Am maverick x3. That thing is crazy fast!! I do not know much about these rigs or exactly what all this one has lol. It has a Memphis audio system, 33"tires, trinity stage 5 exhaust, programmer, rock bars. Among other upgrades. So what are some tips on these rigs? Maintenance issues? Thanks everyone ..read more

Hello, I just joined this forum, although I have been a 2011 Can Am Outlander Max 500 owner for over a decade now. I liked it so much I got a 2015 Outlander 450 for my wife. She, however, can't ride hers due to medical issues now. I joined this forum because I have noticed a lack of power from the Outlander Max and I am going through the pool of knowledge on this site for clues on how to get that back. I am going through the basics before taking it to a local dealer. Thanks to all of... New to Forum ..read more

I have to replace the door hinges on my driver door. It looks like the colored door trim will have to be removed for this. any one know how they come off, I don’t want to pull the wrong bolts from inside the door ..read more

So I have a 2015 can am renegade 800. Is it possible to swap the motor to a 1000 and if so what all needs to be done to make it run correctly and or possibly what is the cost estimate ..read more

I have a 2017 X3 XDS. I twisted the splines on the visco gear in the front differential and having problems finding one. Does anyone know if that is something that can be bought & where to find one or not ..read more

Hello everyone, my first side by side! 2018 Can-am maverick x3 turbo ds ..read more