Citrix 6.5 XenApp Server – Apps start issues  I added a new Win2K8 server in the WorkerGroup, I ensured the Rollups were consistent to other LB servers in the workgroup. When tested the XenApp, it will not load. Following commands solutions were applied which seem to have fixed the issue. On the XenApp Server run Qfarm /load to verify if Connections are allowed, In my case, the connection was allowed visibly under WorkerGroup but when running the command it showed differently. In one case, enabling RDP setting was sufficient to fix the issue. I would try following to test Xenapp server. Check ..read more

Xerox VersaLink C405 Regal Dentistry  In the screenshot, the information in red needs to be filled in as shown ..read more

This article describes how to set up a scanner to function through an ICA session with XenApp. Requirements Citrix policies must be enabled (depending on the type of scanner) . Other requirements The scanner must be TWAIN compliant The TWAIN drivers must be installed on the local device.  They do not need to be installed on the XenApp server The scanner can be attached locally or can be added using network. Ensure that the scanner is using the local TWAIN driver and not the Windows Image Acquisition service Ensure that there is no policy applied to the user account used for the test that is l ..read more

SAN – Storage Area Network What is SAN? Short for storage area network, SAN is a high-speed network of storage devices that also connects those storage devices with servers. It provides block-level storage that can be accessed by the applications running on any networked servers. SAN storage devices can include tape libraries and disk-based devices, like RAIDhardware. The main functions of a storage area network (SAN) includes the following: A high-speed network of storage devices. Connects the storage devices with servers. Can be accessed by applications on networked servers. Particularly he ..read more

VMWARE Exi 6.5 Host  – ISCSI Storage Setup ..read more

CITRIX – Remote Scanning Tips On the client end, Remote Scanning Enterprise Server is installed. We refer this as Remote Scanning Server. You can publish Irfan Viewer (basic TWAIN) from https://support.quest.com/download-product-select to test the Scanning from Citrix XenApp environment. You can call Customer Support call 1-406-721-0276 On XenApp Server, you will install Remote Scanning Client and you have to ensure the following files are present. First, locate the user home drive by typing a command prompt: Set home Then Go to the following folder to ensure if Remote Scan is configured prope ..read more

Aegis – Useful Cleanup Scripts These Scripts are written for personal use so feel free to modify contents at your own risk. Delete a particular folder.  Del ‘\\aegisctxxd054\C$\windows\temp’ -Confirm:$false Del ‘\\aegisctxxd031\C$\Users\%userprofile%\downloads’ -Confirm:$false OR: it could be a list of machine as given below.  Del ‘\\aegisctxxd060\C$\windows\temp’ -Confirm:$false Del ‘\\aegisctxxd059\C$\windows\temp’ -Confirm:$false Del ‘\\aegisctxxd058\C$\windows\temp’ -Confirm:$false Del ‘\\aegisctxxd057\C$\windows\temp’ -Confirm:$false Del ‘\\aegisctxxd056\C$\windows\temp’ -Confirm:$fals ..read more