JConcepts is titanium with the introduction of the 3.5mm Fin turnbuckle sets designed specifically for style, durability, and performance. The base of the design is centered around a .143” (3.7mm) titanium hex size which gradually tapers down into a 3.5mm thread base design which accepts the Schumacher ball-cup after modification*. The focus of the styling surrounds the lengthened adjustment hex area and the “finned” cuts that rotate about the center. The Fin turnbuckles are lightweight, and the original design brings out the glamour and quality that makes titanium one of the most sought-afte ..read more

XRAY have introduced a new 1-piece long aluminium chassis intended for use with their XB2 1/10th buggy. This 2.5mm thick chassis is made of high quality Swiss 7075 T6 aluminium and designed to be used where longer wheel base is needed to increase stability. 1-piece chassis design with integrated kick-up optimizes weight balance and flex with its shape and chassis weight options. The chassis is universal for both Dirt and Carpet editions, fits the latest battery types, and is also suitable for XT2 1/10th 2WD stadium truck. [wartelleshop_button url="https://www.wartelle-shop.com/PBSCCatalog.asp ..read more

T-Work's have introduced new option parts for the Exotek Racing F1Ultra R5 1/10th formula car in the form of a set of titanium turnbuckles and three sets of titanium and steel screws. The turnbuckles are machined from high-quality 64 grade titanium making them stronger yet lighter than the stock turnbuckles. The set consists of seven turnbuckles and comes including 4mm wrench. [wartelleshop_button url="https://www.wartelle-shop.com/boutique/recherche_resultats.cfm?tri=&ordre=&triage=0&marque_nav=541&rayon_nav=-1&gamme_nav=0&prix_min=&prix_max=&mot="] [rcteam_bu ..read more

VP-Pro are excited to release one more color for their 1/10th buggy wheels, the Hot Pink. Very popular in the 1/8th range of wheels, the new Hot Pink" wheels for 1/10th buggy are available for the front in standard and carpet width for 2WD buggy, and for the front and rear of 4WD buggy. The wheels feature a standard 2.5mm offset. VP-Pro will soon be offering the same wheels designed specifically for TLR buggies using different offset. [wartelleshop_button url="https://www.wartelle-shop.com/PBSCCatalog.asp?BrandID=334201&PBBrandName=VP-PRO"] [donutsracing_button url="https://www.donuts-rac ..read more

XRAY have announced the release of new graphite composite elevated chassis side braces intended for use with their XB2 1/10th 2WD buggy. These side braces are made from specially-formulated graphite composite mixture, making them ideal for high-traction conditions. The use of the new graphite composite elevated chassis side braces makes the European ride more stable and predictable. [wartelleshop_button url="https://www.wartelle-shop.com/PBSCCatalog.asp?BrandID=334127&PBBrandName=XRAY"] [rcteam_button url="https://www.rcteam.com/collections/marques-xray?sort_by=manual&filter.v.price.g ..read more

Creation Model have introduced new titanium screws intended for use with the Infinity IF18-3 1/8th nitro on-road car and IF15-II 1/10th nitro on-road car. Specifically designed and machined with high-quality titanium, these screws are a must have to maximize performance of Infinity's nitro platforms gearboxes. The use of lightweight titanium screws inside the two-speed unit contributes to improved engine pickup. The screw head is shaped to achieve the lightest weight possible. Also available a set of three lightweight flat head screws offer an optimum length for installation of 2-speed spur g ..read more

6MIK Racing have added the the Optima range of products new wing spacers intended for use with the Agama N1 and N1e 1/8th buggies. The wing spacers are 3D printed and designed not only to change the height of the wing to adjust the car's aerodynamics and handling but also to provides a more rigid assembly. The wing spacers are available in set of 3-piece. [wartelleshop_button url="https://www.wartelle-shop.com/boutique/recherche_resultats.cfm?code_lg=lg_fr&mot=6mik"] [rcteam_button url="https://www.rcteam.fr/recherche?controller=search&orderby=position&orderway=desc&search_q ..read more

Add protection to your Traxxas Drag Slash and 2WD Slash based oval cars with the new heavy duty alloy, carbon fiber and foam bumper set from Exotek Racing. The new front bumper allows for optional mounting of SkyRC GNSS gps modules safely protected inside of the foam bumper and cover. [rcteam_button url="https://www.rcteam.fr/recherche?controller=search&orderby=position&orderway=desc&search_query=exotek&submit_search="] Details include a heavy duty alloy mounting base and new molded fiber reinforced nylon bumper that secures the extra wide high density foam bumper. The bumper ..read more

Schumacher Racing have announced the release of their long awaited 1/10th electric touring car, the Mi9. The Schumacher Mi9 is a superb high level racing touring car, that is already a proven winner. The Mi9 prototype, has won European ETS races on both carpet and asphalt, GP3F in France, Swedish Nationals, EWS, Mibo Sport International, Italian Nationals and many other major events. The Mi9 is consistently fast on all grip levels, with a wide set up window, which makes it easy to get dialled in wherever you race. The new Mi9 will be available from early May in aluminium chassis and carbon fi ..read more

T-Work's have introduced their new aluminum and brass bulkheads intended for use with Team Associated RC10B7 1/10th 2WD buggy. These bulkheads are machined from 7075-T6 aluminium and high-quality brass, making them durable and sturdy. Available in 0 degrees and +/- 2.5 degrees, the aluminium bulkheads weigh the same as the original bulkheads while the brass bulkheads weigh 26g (0 degrees) and 27g (+/- 2.5 degrees). These parts allow you to change the weight balance to make the front end heavier or lighter, giving it more or less grip depending on track conditions. Package includes one bulkhea ..read more