In this paper, a new Nano-Scale structure of dual material gate oxide stack-double gate TFET (DMGOS-DG TFET) with the inclusion of the dielectric pocket (DP) in the drain region is proposed. Hence the gate consists of three parts, named M1, M2, and M3 with work functions ϕM1, ϕM2, and ϕM3 respectively. The work function engineering with the gate oxide stack (SiO2 as the bottom layer and HfO2 as the top layer) improves ON current, leakage current, and ambipolar behavior. In addition, the dielectric pocket (DP) has been used in the drain region to achieve better ambipolar performance. Moreover ..read more

In this work, novel Bi14W2O27/Bi2WO6 nanocomposite was prepared by a modified Pechini sol-gel approach. The effect of the gelling agent, chelating agent and mole ratio of chelating agent to total metals was controlled to produce ultrafine Bi14W2O27/Bi2WO6 nanoparticles. The as-prepared Bi14W2O27/Bi2WO6 nanocomposite was characterized by XRD, FESEM, FT-IR, EDS and UV–Vis analysis. The Bi14W2O27/Bi2WO6 nanostructures exhibited excellent photocatalytic desulfurization of thiophene (~90%) after 120 min of simulated sunlight irradiation. The high-efficiency photocatalytic desulfurization ..read more

In this study, through the application of TiO2/ZnS as a novel nano photocatalyst, the degradation of AR18 in synthetic wastewater was explored. The nano photocatalyst was synthesized by the co-precipitation method and characterized by Scanning electron microscopy (SEM), Fourier transfer infrared (FTIR), and X-ray powder diffraction (XRD) techniques. The average size of ZnS/TiO2 nano photocatalyst was 79nm. For experimental design and statistical analysis of each factor including AR18 concentration, pH, catalyst dosage, and treatment time on the degradation rate of AR18 (response) by Central Co ..read more

Three-dimensional mesoporous CeO2 hollow sphere (M-CeO2-HS) modified glassy carbon electrode (M-CeO2-HS/GCE) was developed in this study as a very sensitive voltammetric sensor for detection of terazosin. This produced modifier was characterized by techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). There was a remarkable improvement in the electrochemical behavior relative to terazosin electro-oxidation on M-CeO2-HS/GCE surface, compared to bare GCE, in the optimized conditions of supporting electrolyte pH and caste ..read more

In this paper, we report a new method for the synthesis of spherical CoO nanoparticles using a new metal-organic framework of Co(II). Nano particles of a coordination polymer compound, [Co(3,5-DNBA)]n (1) (L- = 3,5-dinitro benzoic acid) was synthesized and characterized by scanning electron microscopy (SEM), X-ray powder diffraction (XRD), and IR spectroscopy. The thermal stability of compound 1 has been studied by thermal gravimetric (TG) and differential thermal analyses (DTA), and UV-vis spectroscopy. In addition, compound 1 was used as a precursor for the synthesis of Cobalt oxide nano-par ..read more

Co3O4 / NiO @ GQDs @ SO3H nanocatalyst has been used as an effective catalyst for the preparation of 2,4-diamino-6-arylpyrimidine-5-carbonitrile derivatives through a three-component reaction of malononitrile, aromatic aldehydes and guanidine hydrochloride under reflux conditions in ethanol. The catalyst has been characterized by FT-IR, XRD, SEM, EDS, BET, TGA, XPS and VSM. Atom economy, reusable catalyst, low catalyst loading, applicability to a wide range of substrates and high yields of products are some of the notable features of this protocol.The best results were gained in EtOH and we fo ..read more

Metal oxide nanoparticles due to their antioxidant properties have attracted significant attention and exhibited good potential for use in cancer theranostics. Owing to the poor absorption in the physiological environment, they are an ideal candidate to act as nanocarriers in targeted drug delivery and bioimaging. This feature can be successfully implemented in live monitoring and imaging applications, which offer the possibilities and scope for optical, magnetic resonance, and nuclear imaging. The environment of malignant cells like the rapid proliferation of cells, specific antigen expressio ..read more

The use of various plant materials for the synthesis of nanoparticles is considered as green synthesis, which does not involve any harmful chemicals. In this study, silver nanoparticles were synthesized by a fast, one-step method and a green biosynthesis method by regenerating a silver nitrate solution using Oak peel extract containing biomolecule which as a reducing and stabilizing element Suitable to play a role. Effective parameters such as pH of solution, silver nitrate concentration, temperature and contact time were studied and optimized The structure and properties of nanoparticles were ..read more

Zinc oxide (ZnO) nanoparticles have been attracted for their antibacterial effects along with their safety, suitable physicochemical properties, and cost effectivity. The aim of this study was to synthesize ZnO nanoparticles and investigate their antibacterial effects on multidrug resistant (MDR) uropathogenic bacteria. ZnO nanoparticles were constructed by wet chemical method with inhibitor. Structural and optical evaluation of zinc oxide nanoparticles was performed by Ultraviolet absorption spectroscopy, X-ray diffraction (XRD), and Tunneling microscopy. Uropathogenic bacteria were isolated ..read more

Two simple, fast and novel delicate fluorimetric and spectrophotometric strategies were examined for the measure of ceftobiprole (CEF) utilizing gold nanoparticles (Au NPs). On spectrofluorimetric strategy, gold nanoparticles were utilized as a fluorescence test. The expansion of CEF to Au-NPs arrangement caused significant quenching of the outflow band of Au-NPs, which was likely due to the complexation of the medicate to gold NPs. Beneath the ideal conditions, the extinguished fluorescence (FL) escalated was straight with the examined concentration. The extinguishing instrument of CEF on the ..read more