The Glimåkra Standard is where I am most comfortable, even though the reach of the full width is stretching me. The curtains for the bathroom are progressing. No new news, just continuation of adding cloth to the cloth beam. Still weaving this M’s and O’s curtain yardage. Looking forward to the day the curtains will hang in our remodeled bathroom.Fabric is adding up on the cloth beam. The Glimåkra Ideal is patiently waiting for a new tapestry warp. I have a bit more design work to do on the cartoon, and then I’ll be winding the warp with the 16/2 linen I have set aside just for this project. I ..read more

Every now and then I forget where I left off. This happens when I get interrupted when I am not quite finished with a sequence at the end of a weaving session, or when I get interrupted when I am just getting started back on the loom. Often, the interruptions are my own thoughts going in different directions. The only loss is a few dozen weft threads that get pulled out one by one, plus the time it takes to pull them out and weave the right ones back in. Everything is fixable. Sometimes it is necessary to backtrack. I was at a pause in weaving. When I came back to it I forgot to put in the gra ..read more

Three looms are active right now. The drawloom has the napkin project, with a wild turkey on this one. Wild turkey feet and legs weave up quickly. There are only a few single unit draw cords to pull at a time, plus one pattern shaft draw handle for the side borders.Wild turkey feathers require many more single unit draw cords. Even the borders at this place in the pattern are done with single units. The cast shadow on the loom from the bell that hangs in the window makes a funny face at this time of day. Could be a silly turkey face? The Julia has the wool goose-eye twill fabric that I plan t ..read more

How much more thread will a 13cm quill hold than an 11cm quill? In other words, how much further can I weave with the longer quill? I decided to do a simple test to find out. Which size quill should I use for the rest of this project? Red threads give me precise start and stop points for measuring how far I could weave with one quill. I will pull the red threads out when I cut the fabric from the loom. First, I mark the beginning of the 11cm quill with a short red thread woven through a few ends on the same row as the first row of weft from that quill. I weave off the thread from that quill an ..read more

Armadillo, fox, porcupine, jackrabbit, and deer are leading the critter parade. The twelve napkins will include the most common, the most interesting, and the most unusual animals that visit our backyard here in Texas Hill Country. The white-tailed deer are the most common, by far. Feet first. The white-tailed buck is taller than he is wide, so his feet touch the bottom border. Pulled single-unit draw cords are seen on the hook bar pegs above the beater.Just past the midway mark on this napkin, as seen on the measuring ribbon pinned on the side.Having a large chart beside the loom helps me kee ..read more

Merry Christmas! Julia is getting dressed with 7/2 Brage wool for a lovely goose-eye twill. Warp chains like this are big and squishy, just begging to be hugged. Winding the first of two warp bouts.Thick and fluffy warp chain of 7/2 Brage wool.Getting ready to beam the warp. Wool in five colors for goose-eye twill.Getting things ready to spread the warp and then beam it on. This project is going nearly full width on this 70 cm Glimåkra Julia countermarch loom. My warping slats are exactly 67 cm. (I should have measured the warping slats before I started.) At 65.7 cm weaving width I’m asking fo ..read more

Jack the Jackrabbit is ready to hop on over the breast beam. It is time to design the next napkin. I design one at a time and then weave it. We have the armadillo, the porcupine, the gray fox, and the jackrabbit. Up next is a white-tailed deer. Steve took a photo of a white-tailed buck on our property last week. I will use that photo as the basis for my deer design. Finished to the top of Jack’s ears.Chart shows row-by-row pulls for pattern-shaft handles and single-unit cords. One draw handle is pulled for each row of the side border. I enjoy paying attention to the amazing wildlife around us ..read more

Jackrabbit. This critter is one I would like to see more often. We call him “Jack,” or if there are two of them together, they are known in our family as “Jack and Jackylina.” The jackrabbit makes me smile because of his tall ears and mischievous-looking face. The nice thing is he doesn’t cause any mischief, like some of the other critters around here. He will sit completely still, without a twitch. I’m sure he wants you will think he’s a rock, and pass on by without noticing him. But if you get a little too close, he hops up and quickly dashes away. When we have all twelve napkins at the dini ..read more

If at first you don’t succeed, count, count again! 1984–I’m not talking about the year, nor the book title. I’m talking about the number of 24/2 cotton ends in this 8.5-meter warp. I made it excruciatingly challenging for myself by putting in narrow stripes of 8 ends that are irregularly spaced. It will all be worth it if these curtains come out as I envision them. Time will tell. After beaming the warp I count all the ends into threading groups. This step is usually straightforward and quick. This time, however (because of my uneven spacing of stripes and because of the fineness of the ends ..read more

It is my husband’s idea for me to make handwoven curtains for the windows in our newly renovated master bathroom. Now that I have had time to think about it, I think it’s a great idea. Fortunately, the yellow rug warp on the Glimåkra Standard is still sitting on the loom bench, so I am putting it aside temporarily in order to put this bathroom-curtains warp on the loom. Winding a warp of 24/2 unbleached cotton.Looks like a mess. Pre-sley the reed to spread the warp. Two sets of lease sticks. Narrow gray stripes of 16/2 cotton are inserted between the unbleached ends. Somehow, it all works out ..read more