Reprap development and further adventures in DIY 3D printing
672 FOLLOWERS
Richard's aim is to help others build technology and eventually a 3D printer of their own. He is an Electronics engineer who is highly interested in 3D printing.
Reprap development and further adventures in DIY 3D printing
3y ago
Hello Everyone,
It's fair to say that 2020 has been a difficult year for everyone. I almost didn't write this blog post, but I wanted to finish off 2020, looking forward to a better 2021.
With the global virus pandemic causing troubles and uncertainty we all have less time to do the things we enjoy. This year has certainly been a strong reminder to us all, to try and enjoy as much of life as possible.
I have kept 3D Printing during all of 2020, but have not managed to share as much as I would have liked.
I started off 2020 firmly intending to do a lot more 3D Printing development ..read more
Reprap development and further adventures in DIY 3D printing
5y ago
ColorFabb LW-PLA (Expanding/Foaming PLA) Filament for FDM 3D Printing - Part 1 Hello everyone, Richard here - In this blog post I'll be looking at a new and unique 3D Printing material for the FDM/FFF process. I have done a lot of testing and experimentation with this material, so if all you want to know is my opinion about using it for a few months, then a quick TL;DR overview summary is below, (and also just to the bottom of the blog for a summary and setting you will need) but I do hope you find the rest of the blog post interesting as it may give you some ideas of what you could do with a ..read more