UOBD2 Blog
46 FOLLOWERS
UOBD2 (UOBDII.COM) is an obd2 online shop belonging to HK 360 CAR REPAIR NETWORK CO., LIMITED. We've been running for more than ten years exporter featuring professional obd tools for Do-It-Yourself and professional automotive mechanics at wholesale price.
UOBD2 Blog
2d ago
Lonsdor engineer solved the problem that K518 Pro has some problems for Audi car key adding.
Let’s see how it works well on an Audi A6L 2010.
A small tip at the beginning:
Connect Pin1 and Pin16 of the OBD cable, and connect OBD cable to the vehicle
Select Immo & Remote>> AUDI>> A6L>> 2009>> Immobilizer
First, read engine data
Switch the ignition on
Read data successfully, and save the data with a filename
Confirm the file name
Then, make dealer key
Put a key into the coil of Lonsdor K518 Pro
Read the current key ID and generate key
Generate and lock t ..read more
UOBD2 Blog
5d ago
Lonsdor Tech released new Fiat Immobilizer software for K518 Pro and K518 series key programmer on April 23rd, 2024. Check the latest update info and learn how to read IMMO data and program new keys to Fiat via OBD.
Update Info:
1.Newly added the following Fiat models:
Grand Punto/2005-2014
500/2006-2017
Nemo/2007-2017
Bipper/2007-2017
Cinquecento/2007-2021
MiniCargo/2008-2021
Qubo/2008-2021
Fiorino/2008-2021
New Fiorino/2008-2021
Punto/2009-2021
Punto Evo/2009-2021
Pratico/2010-2021
Doblo/2010-2021
Viaggio/2011-2018
Panda/2011-2021
500C/2011-2021
Avventura/2014-2 ..read more
UOBD2 Blog
5d ago
Confirmed! OBDSTAR X300 Classic G3 can read Audi Bosch MED17.5 TC1766 on Bench without any issue.
Accessories required:
OBDSTAR MP001 Programmer
OBDSTAR P004 ECU Clone Jumper
Main cable
Menu function path:
ECU Flasher>> ECM>> ECM V30.60>> med17.5>> AUDI Bosch MED17.5 TC1766
X300 Classic G3 Audi MED17.5 TC1766 Wiring Diagram:
Connection:
After connection, select [BENCH] and [MP001]
Connect to an available internet
Read ECU Info- OK
Read INT EEPROM data- OK
Read INT Flash data- OK
Read IMMO data- OK
Done!
The post OBDSTAR X300 Classic G3 ..read more
UOBD2 Blog
1w ago
CGDI CG100X Programmer V1.4.7.0 updated on April 20th, 2024.
1. Added 26 models to dashboard.
2. Added 1 model to read-write.
The following models are added for dashboard.
Ankai Bus 24C08
Aochi Aochi 2021- STM32F103VE
baoding grabbing machine 55 Digging machine 24C04
BAIC EV150 2015- 9S12HZ128
Chusheng Wrecker 2014- 24C04
Toyota Fortuner 2019- MB91F060BS
Ford Explorer 2021- 24C32
FOTON Oumake zhilan 24C64
FOTON Auman EST 24C04
Redflag EQM5 2022- 24C16
JAC Sihao E50A 2022- 24C16
JAC Kangling 2023- 24C16
JMC shunda 2022- R5F10DSLL
JMC JMMC 2023-25256
MG MG5 2022- 95640(Dashboard)+95320(BCM)
Nezh ..read more
UOBD2 Blog
1w ago
Alientech Kess V3 released a new upgrade on April 17th, 2024. Now it can read and write SUZUKI Denso 33910-79JX/57KX and SUBARU Denso 112731-5040 ECUs.
Update Info:
Enhance performance, repair, or reduce fuel consumption with the two new protocols now available on KESS3 to intervene on bench with maximum effectiveness. Read, write, and clone directly from the ECU connector of the Denso 112731-5040 and Denso 33910-79JX/57KX ECUs equipped on the most popular models of the Subaru and Suzuki range.
Focus on the new ECUs:
Denso 112731-5040
Denso 33910-79JX/57KX
Achieve maximum potential in repro ..read more
UOBD2 Blog
1w ago
Here uobdii.com shares the newest software update info and free download link for CGDI CG100X Programmer.
Update details:
Latest software: V1.4.6.0
Update time: April 13th, 2024
Added 28 models to dashboard
The following models are added for dashboard.
Aprilia GPR250 24C16
WuLing Baojun RM5 S6J328C (CAN)
BAIC BOteng M3 2022- 24C08
BYD AUTO watering car T8 24C64
Buick Excelle 2011- 9S12HA32aftemarket (Dashboard)s
Dongfanghong L1100 Tractor 24C02
DongFeng Duolika D5 93C66
Toyota Ruifang 24C32 (Full LCD)
Guojizhijun GC1 2020-2021- 9S12ZVH128
JAC Shuailing S3 24C04
JMC YuSheng ..read more
UOBD2 Blog
1w ago
Have two Volkswagen MED 9.5.10 ECUs. The original one is Bosch 0261S02138, and the new one is Bosch 0261S02007. Use CG FC200 ECU Programmer with MPC5XX Adapter to read both data, and write the original ECU data into the new ECU on bench perfectly. No need to disassemble ECU cover using K- line!
Let’s see how to clone MED 9.5.10 with CG FC200.
1.Back up original ECU data
Connect FC200 Programmer and a PC
Run CG FC200 software
Select Volkswagen (VW), and input the original ECU Bosch number-0261S02138 to quickly find out the ECU model is BOSCH MED 9.5.10 MPC561 ..read more
UOBD2 Blog
2w ago
If Autel IM608 series key programmer (IM608/ IM608 II/ IM608S II) vehicle App disappears after updating, how to solve it?
Here is the solution.
For example: BMW software
Step 1. Delete the BMW folder
Tap the home button
Select ES File Explorer>> Scan>> Vehicle>> Europe>> BMW
Confirm to delete the BMW folder
Delete BMW files successfully
Step 2. Pull up to close all applications
Step 3. Download BMW software again
Tap MaxiIM on the home screen
Tap Update on the main menu
Download all BMW software
Then the Autel IM608 problem will be solved.
Tech support:
E-Mail ..read more
UOBD2 Blog
2w ago
Question:
How to use Yanhua Mini ACDP 2 to clone BMW N46 MEV1721 on bench?
Here is the clue.
First, you need to have Mini ACDP2 Programmer with 20 Pin cable, ACDP BMW-DME-Adapter X8 Bench Interface Board and A51C BMW ECU Clone Software License.
BMW X8 Bench Interface Board Overview:
It is specially designed for N45/N46 DME ISN read/write and clone.
Module Function:
Support BMW E chassis N45 (ME1721) / N46 (MEV1721) DME ISN read/write and clone.
Module Feature:
1.No need to open DME shell, no need to drill hole on DME, no need to plug wire.
2.The special interf ..read more
UOBD2 Blog
2w ago
This article focuses on comparing the Xhorse Multi Prog and CG FC200.
Similarities:
Both are original ECU/TCU programmers.
Both support VAG MQB48 NEC35XX IMMO data reading and mileage correction.
Differences:
Multi Prog and FC200 have their own advantages on different ECUs and TCUs.
The software free update expiration and subscription cost are different.
The numbers of language supported are different.
Check more details below.
Item
Xhorse Multi-Prog
CG FC-200
Image
Price
$800
$608
Keyboard functionality
Yes, no need a mouse
No, need a mouse
EC ..read more