Magnet Shop Blog
4 FOLLOWERS
Read topics including; Magnetic Cable Management, Knife And Pan Wall Made Of Solid Oak, Magnets In Aquaristics, and Greeting Cards With The Help Of Magnets on Magnet Shop Blog. Magnet Shop is the online shop for the most powerful magnets in the world and provides lots of magnetic ideas for everyone.
Magnet Shop Blog
1w ago
Car sunroof leaking? Seal with magnetic foil!
Heavy rain!? Is it dripping heavily through the sunroof?
The car is either old? You don’t have any money at the moment? The workshop doesn’t ask for an appointment until two weeks from now?
No problem – a magnetic film can help quickly and cheaply!
Car sunroof leaking? Seal with magnetic foil!
First you should check whether the roof is also „magnetic“ – i.e. whether magnets from the refrigerator, for example, stick to it.
Then measure the sunroof and add at least 10 cm all around.
Example: the sliding roof is 80 x 60. You should calculate at least ..read more
Magnet Shop Blog
2w ago
So that it doesn’t keep falling over, a magnetic weight was quickly made for the lamp.
Magnetic weight for lamp
Hello dear employees of the Magnet Shop,
Here is our use for the ringmagnet Ø 140.0 x 60.0 x 20.0 mm Y30 ferrite – holds 19 kg.
There was previously a concrete-like mass under the lamp that simply crumbled out.
Without weight it always tipped over. With the magnet it holds perfectly again.
Would you like to securely attach a metal part without having to use hammers and nails, adhesive strips or anything like that? Our ferrite ringmagnets can be ordered in various sizes and quantiti ..read more
Magnet Shop Blog
1M ago
Today we present you a tailor-made custom-made product: Magnetic windscreen cover on the boat.
Magnetic windscreen cover on the boat
Dear Magnet Shop team,
I sewed the magnets into a steel window cover for a boat. This avoided unnecessary holes in the steel caused by other fastenings.
The customer is very satisfied with the handling.
Procedure
I needed 8 magnets for the cover in the photo. They are disc magnets 30.0 x 5.0mm N50 nickel.
First, the magnets were attached to the outside of the cover to determine the exact position. The locations were marked and the magnets were safely pack ..read more
Magnet Shop Blog
8M ago
Our customer designed a magnetic poster stripas a Christmas present.
Magnetic poster strip
Hello, my dears,
I’ve already sat down on my Christmas presents (so that I can enjoy the pre-Christmas period without stress) and have been busy crafting.
This year I decided to make poster strips. Since I always paint my Christmas mail myself, I made hangings in DIN A5 format.
So the Christmas cards are included in the gift
Here is a short guide on how I did it:
Poster strips
Material:
Wooden strip 2 times: 116 x 20 x 5 mm
Wood varnish, desired color
Neodymium magnets 4 times: discmagnet Ø 8.0 x 2.0 m ..read more
Magnet Shop Blog
8M ago
Today we present a magnetic idea that allows you to use the bathroom in peace while camping; Attachment tent for the tailgate.
Attachment tent for tailgate
Hello,
I would like to present the magnet application I made with your magnets. I used 24 discmagnets Ø 20.0 x 3.0 mm N45 nickel – holds 4.1 kg.
My girlfriend and I have a small camper van that we are currently getting ready for a longer trip.
We try to make as many things ourselves as possible. On the one hand, we want to save money, but on the other hand, we also want to design everything exactly the way we want it.
Since it is an older R ..read more
Magnet Shop Blog
8M ago
Vehicle advertising for a rally vehicle thanks to magnetic foil as an advertising medium.
Magnetic foil as advertising medium
All the many meters of magnetic foil coated black, width 1000 x 0.85 mm, running meters that I bought from you, I used for my rally vehicles.
All advertising media were stuck on magnetic foil. I can attach these to the vehicle at will.
I’m driving a rally on August 27th, Berlin – Portugal. All my advertising stickers on magnetic foil can be easily removed again after the rally.
I’ve already passed it on to others and have met with great interest.
  ..read more
Magnet Shop Blog
10M ago
Today we will introduce you to a „mysterious“ magnet application; Box with magnetic closure
Box with magnetic closure
Magnets used:
Rodmagnet Ø 3.0 x 6.0 mm N48 nickel – holds 400 g
Rodmagnet Ø 3.0 x 10.0 mm N45 nickel – holds 500 g
It is important that the magnets in the front wall of the box are not in the middle but are offset approx. 1 mm to the rear.
This ensures that the lid is closed as far as it will go when the magnets pull the lid closed.
This means that the magnets at the bottom of the box are not exactly above the magnets in the lid, but are offset by approx. 1 mm ..read more
Magnet Shop Blog
10M ago
In order to be able to sleep undisturbed, our customer installed an insect protection in the mobile home using our products.
Insect protection in the mobile home
Big problem with older mobile homes: no insect protection curtain!
With magnets, we have found a solution that is quick and easy to assemble and disassemble.
Wherever it was necessary, we attached a steel perforated tape in the door frame with a 5 cm wide gaffer tape (fabric tape).
Our insect repellent is placed on the manufactured tape and held securely in place with the magnets.
Works great and we enjoy the nights without annoying ..read more
Magnet Shop Blog
10M ago
After a successful consultation on the use of our magnets, the project came about; Height-adjustable feet for bar table
Height-adjustable feet for bar table
I needed these magnets for my bar table constellation that I wanted to build.
Old oil or grease drums should have adjustable feet.
With the help of a wooden plate and your magnets Ferrite pot magnet Ø 50.0 x 10.0 mm cylindrical bore, 18 kg, I was able to successfully implement my project.
(With 4 magnets, each weighing 18 kg, the plates don’t come off quickly either)
There was a dislocation of the feet. Your magnets were mounted from below ..read more
Magnet Shop Blog
1y ago
A magnetic attachment of a cable guide is today’s topic.
Magnetic attachment of a cable guide
Dear Team,
I was happy to see your „competition“ as an insert in my package, in which I can tell about my purpose for a voucher. The following is my purpose:
Attachment of a cable guide with protective tube and pipe clamps to the meter box itself
cable in the protective tube
pipe clamp and protective tube
pipe clamp
Magnetic attachment of a cable guideMaterial used:
3 x neodymium pot magnets Ø 32.0 x 7.0 mm, internal thread M6, 26 kg
M6 x 16 pan head screws
Pipe clamp OBO Betterm ..read more