MECHANICAL CONSTRUCTION ENGINEER
551 FOLLOWERS
A blog for a mechanical construction engineer. This blog discusses all the activities that happen in the OIL & Gas industry.
MECHANICAL CONSTRUCTION ENGINEER
1y ago
ASME PCC-2 : 2018
Repair of Pressure Equipment and Piping
API 570 STUDY GUIDE
PART 2
Part 1 of this Series:
https://hareeshkv.blogspot.com/2022/11/API570MODULE11PART1-ASMEPCC-2-2018.html
Here we will go through Article 201 of ASME PCC-2
Part 2 : covers repair methods and techniques that include the use of welding, brazing, solderi ..read more
MECHANICAL CONSTRUCTION ENGINEER
1y ago
ASME PCC-2–2018
Repair of Pressure Equipment and Piping
INRODUCTION
Another code is added for the exam of API 570 Piping Inspector Exam. This code will be effected from the February 2023 exam window.
Even though it is not needed, we will have a look at the scope of the standard. This will give a general idea about why the standard is generated and where we can apply this standard.
SCOPE
This is a standard not a code.
This standard covers the methods for repair of equipment, piping, pipelines, and associated ancillary equipment
This standard is applicable to Equipment and piping within ..read more
[MODULE 2 PART 3] API 571 (3rd ED, Mar 2020) - API 570 STUDY GUIDE - AMINE STRESS CORROSION CRACKING
MECHANICAL CONSTRUCTION ENGINEER
2y ago
API 570 STUDY GUIDE MODULE 2 PART 3 AMINE STRESS CORROSION CRACKING
API 571 (3rd ED, Mar 2020)
Amine Stress Corrosion cracking
or
Amine SCC or Amine Cracking
Amine SCC is related to tensile stress, type of amine and temperature
Amine SCC causes CRACKS in Carbon Steels and Low-alloy steels.
Click here for reading the previous blog in this series 5. Appearance or Morphology of Damage
All the points given in Clause 3.3.5 (a) to (g) has to be remembered. Each point can be asked as a question in the exam.
6. Prevention/Mitigation
1. Stress Relieving (For CS)
2. W ..read more
[MODULE 2 PART 2] API 571 (3rd ED, Mar 2020) - API 570 STUDY GUIDE - AMINE STRESS CORROSION CRACKING
MECHANICAL CONSTRUCTION ENGINEER
2y ago
API 570 STUDY GUIDE
AMINE STRESS CORROSION CRACKING
API 571 (3rd ED, Mar 2020)
Amine Stress Corrosion cracking or Amine SCC or Amine Cracking
Amine SCC is related to tensile stress, type of amine and temperature
Amine SCC causes CRACKS in Carbon Steels and Low-alloy steels.
1. Description of Damage
Amine SCC occurs by the combined action of tensile stress and an aqueous alkanolamine solution.
Note that pure alkanolamine does not cause Amine cracking so an aqueous alkanolamnie presence is needed for cracking to occur.
Amine Cracking is a form of Alkaline Stress Corrosio ..read more
MECHANICAL CONSTRUCTION ENGINEER
2y ago
API 570 STUDY SERIES
API 571 INTRODUCTION (3rd Edition, March 2020)
API 571 is one of the 10 codes that is in the exam syllabus of API 570 Authorized Piping Inspector.
API 571 deals with Damage Mechanisms Affecting Fixed Equipment in the Refining Industry. As mentioned previously always refer the latest API 570 Exam Publications Effectivity Sheet based on your plan for the exam.
ANSI/API RECOMMENDED PRACTICE 571 is a book contains large number of pages. But Only the following sections / mechanisms from RP 571 are included on the exam for API 570:
Section 2 Definitions
3.3 Amine St ..read more
MECHANICAL CONSTRUCTION ENGINEER
3y ago
AMERICAN WELDING SOCIETY (AWS) SENIOR CERTIFIED WELDING INSPECTOR (SCWI)
AWS-SCWI EXAM TIPS
American Welding Society - Senior Certified Welding Inspector (AWS SCWI) is a certification that can be availed after completing two renewals as AWS CWI.
There is no study guide available for the same.
There are 13 documents to be studied for the preparation of AWS SCWI.
AWS SCWI Exam Pattern: The interesting part is that it is a two session open book examination. The books are available at the examination center.
Exam Strategy:
Attend as much questions as you are confident to answer in the fir ..read more
MECHANICAL CONSTRUCTION ENGINEER
3y ago
AMERICAN WELDING SOCIETY (AWS) SENIOR CERTIFIED WELDING INSPECTOR (SCWI)
AWS-SCWI EXAM TIPS
American Welding Society - Senior Certified Welding Inspector (AWS SCWI) is a certification that can be availed after completing two renewals as AWS CWI.
There is no study guide available for the same.
There are 13 documents to be studied for the preparation of AWS SCWI.
AWS SCWI Exam Pattern: The interesting part is that it is a two session open book examination. The books are available at the examination center.
Exam Strategy:
Attend as much questions as you are confident to answer in the fir ..read more
MECHANICAL CONSTRUCTION ENGINEER
3y ago
API 570 EXAM STUDY GUIDE MODULE 9 : PART 6
ASME B31.3 : PROCESS PIPING
Continuation from previous blog,
Figure 323.2.2A
Now we will go through Figure 323.2.2A which contains different curves.
Figure: 323.2.2A : Minimum temperatures without impact testing for carbon steel materials. The values related to figure 323.2.2A is given in Table 323.2.2A Tabular values for minimum temperatures without impact testing for carbon steel materials.
The table can be referred based on the thickness and curve. Please note that the temperature given in the table is the minimum temperature the materi ..read more
MECHANICAL CONSTRUCTION ENGINEER
3y ago
API 570 EXAM STUDY GUIDE MODULE 9 : PART 5
ASME B31.3 : PROCESS PIPING
Continuation from previous blog,
S = Stress value for material.
'S' from Table A-1 or Table A-1M
SI units are given in Table A-1M, in that Stress is given in MPa for temperatures in degrees Celsius.
The second table given here is a continuation of first table in terms of rows.
Example : Line 10 : A106 Grade A:
From first table:
P no: 1
Min. Temp in Degree Celsius : Cure B in Figure 323.2.2A(This we will discuss)
Minimum tensile strength : 331MPa
Minimum Yield Strength : 207MPa
Max. use temperatu ..read more
MECHANICAL CONSTRUCTION ENGINEER
3y ago
API 570 EXAM STUDY GUIDE
MODULE 9 : PART 4
ASME B31.3 : PROCESS PIPING
Internal Pressure and Minimum thickness of pipe.
The inspector should be able to determine the internal pressure and minimum thickness of the pipe.
The minimum required thickness or pressure design thickness of a straight pipe section for internal pressure only (ASME B31.3 Section 304.1.1 and 304.1.2)
The minimum required thickness of a permanent blank for a given design pressure (ASME B31.3 Section 304.5.3);
We will start from Clause 304.1.2. There are two equations (3a) and (3b).
We will study ..read more