2020 Year in review - 3D Printing Adventures and a look to 2021
Reprap development and further adventures in DIY 3D printing
by
3y ago
Hello Everyone, It's fair to say that 2020 has been a difficult year for everyone.  I almost didn't write this blog post, but I wanted to finish off 2020, looking forward to a better 2021. With the global virus pandemic causing troubles and uncertainty we all have less time to do the things we enjoy. This year has certainly been a strong reminder to us all, to try and enjoy as much of life as possible. I have kept 3D Printing during all of 2020, but have not managed to share as much as I would have liked.  I started off 2020 firmly intending to do a lot more 3D Printing development ..read more
Visit website
ColorFabb LW-PLA Expanding Foaming Plastic Filament for 3D Printing - Part 1 Testing and experimentation
Reprap development and further adventures in DIY 3D printing
by
5y ago
ColorFabb LW-PLA (Expanding/Foaming PLA) Filament for FDM 3D Printing - Part 1 Hello everyone, Richard here - In this blog post I'll be looking at a new and unique 3D Printing material for the FDM/FFF process. I have done a lot of testing and experimentation with this material, so if all you want to know is my opinion about using it for a few months, then a quick TL;DR overview summary is below, (and also just to the bottom of the blog for a summary and setting you will need) but I do hope you find the rest of the blog post interesting as it may give you some ideas of what you could do with a ..read more
Visit website

Follow Reprap development and further adventures in DIY 3D printing on FeedSpot

Continue with Google
Continue with Apple
OR