Adafruit Industries | 3D printing
534 FOLLOWERS
Adafruit was founded in 2005 by MIT engineer, Limor "Ladyada" Fried. Her goal was to create the best place online for learning electronics and making the best designed products for makers of all ages and skill levels. Find everything related to 3D printing here.
Adafruit Industries | 3D printing
23h ago
ChevaTomme shares:
This remake is version 2 of my Caliper Wall Holder – Mitutoyo 150 mm.
I made some changes so that it is now even more easy to pick and place the caliper and i am really satisfied with how it feels and works now.
download the files on: https://www.thingiverse.com/thing:6585580
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and hi ..read more
Adafruit Industries | 3D printing
23h ago
TheSylencer shared this project on Thingiverse!
Just an ordinary shovel handle I made for an otherwise good shovel. The diameter at the base is 1 1/4 inch.
Download files here: https://www.thingiverse.com/thing:6582031
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!
Have you considered building a 3D project around ..read more
Adafruit Industries | 3D printing
23h ago
kiy03hi shared this project on Thingiverse!
Needs some kind of keyboard switches (I don’t think it matters you just need 4). Just put the switches in and put the keycaps on.
Download files: https://www.thingiverse.com/thing:6572242
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!
Have you considered building a 3D pr ..read more
Adafruit Industries | 3D printing
1d ago
mcwhirtj shares:
Print one of these bit tray covers, put a rubber band or velcro strap around it, and you can throw your bit tray into the bottom of your tool box and not have the bits come out and make a mess! Truly awesome. I had five sets of bits so I labeled them with a paint marker.
Fully parameterized model in .FCStd format, created using FreeCAD 0.21.1
download the files on: https://www.thingiverse.com/thing:6581714
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have ..read more
Adafruit Industries | 3D printing
1d ago
yodeling_yeti shared this project on Thingiverse!
Fidget toy for use with either 1, 2, 3, or 4 MX style keyboard switches.
Download files here: https://www.thingiverse.com/thing:6581664
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!
Have you considered building a 3D project around an Arduino or other microcontroll ..read more
Adafruit Industries | 3D printing
1d ago
3D Hangouts – Energy Sword, Media Dial and Nuka Cola Bottle
This week @adafruit we’re working on our Halo Energy Sword prop remake powered by the Feather PropMaker 2040. Prototyping a new version of our classic media dial using QT Py RP2040 and Rotary Stemma QT. Time lapse this week features the iconic Nuka Cola bottle from Fallout designed by Theo.
Feather RP2040 PropMaker:
https://www.adafruit.com/product/5768
Mini Skinny NeoPixel Strip 60/m
https://www.adafruit.com/product/2959
QTPy RP2040
https://www.adafruit.com/product/4900
Rotary Encoder Stemma QT
https://www.adafruit.com/product/5880 ..read more
Adafruit Industries | 3D printing
1d ago
hitchhiker4200 shares:
These vases are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize.
Just a little vase design I’ve been playing around with for a few days. Finally decided it was fit to print and I’m pretty happy with how it turned out.
You should be able to scale the model up between the various sizes I’ve uploaded, but you may lose the central weld at some point. If you have a specific size you would really like to print, just let me know and I can co ..read more
Adafruit Industries | 3D printing
1d ago
Every week we’ll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week:
Nuka-Cola
By theo
https://www.printables.com/model/158018-nuka-cola-bottle
CR10S Pro V2
Clear PLA
6hr 05mins
X:255 Y:180 Z:175mm
.2mm layer / .4mm Nozzle
6% Infill / 1mm Retraction
200C / 60C
19g
60mm/s
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures ..read more
Adafruit Industries | 3D printing
2d ago
Big_Babol shares:
A watering can design, that has a sprinkler nozzle suitable for small plant pots
download the files on: https://www.thingiverse.com/thing:6581263
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!
Have you considered building a 3D project around an Arduino or other microcontroller? How about printin ..read more
Adafruit Industries | 3D printing
2d ago
n602 shares:
Waveshare 7″ portable display stand for Raspberry Pi 4/5 +Pibow Coupe 4/5
This “thing” allows you to assemble either Raspberry Pi 5 + Pibow Coupe or Raspberry Pi 4 + Pibow Coupe 4 into a compact small display stand.
So this was designed to combine a Waveshare 7″ portable display with a Raspberry Pi 4/5 and Pibow Coupe 4/5 into a small, unobtrusive console.
download the files on: https://www.thingiverse.com/thing:6581118
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recentl ..read more