JillyBeanPottery
358 FOLLOWERS
Highly textured handbuilding methods of slab, coil and pinch pot.
JillyBeanPottery
3y ago
Back when I first started producing planters in quantity, I had developed a series of texture patterns. Each pattern used my handmade stamps and/or found objects to create a design.
There was tire tracks that used a small wheel I had found. And sunflower that used my stamps and rollers. And … so many that I eventually built up a list of twenty or so patterns I rotated through. I made many planters in this style until I switched firing temperatures a couple of years ago. Once I switched, my textured planters became fewer and glaze designs like subway lines and seedlings stole the spotlight.
My ..read more
JillyBeanPottery
3y ago
You can never have enough clay tools IYKYK.
Today I’m going to share one of the ways I make personalized cookie cutters for clay jewelry, but really for any time you need a unique, small cutter.
Tools Mentioned
Safety Glasses – find ‘em here
Tin Snips – feels just like using a power tool here
Masking a Tape
All tools noted above are my own personal preferences for my studio practice. Purchases made using the links don’t add any cost to you, but do provide a small amount to me in support of my blog and videos ..read more
JillyBeanPottery
3y ago
I’m having so much fun sharing jewelry tips with everyone! Today I’m sharing an easy way to make your pendants so you need fewer jewelry findings after firing – always a good thing in my book!
Tools Mentioned
Wooden Skewer – definitely check the dollar store or here
Pin Tool – an example here
Smoothing Rib – an example here
Even Dough Bands – an example here
Be sure to check out the other videos mentioned: ceramic beads and rolling out a slab!
All tools noted above are my own personal preferences for my studio practice. Purchases made using the links don’t add any cost to you, but do provid ..read more
JillyBeanPottery
3y ago
I “grew up” in the clay world firing my work at cone 10 reduction. For those unfamiliar with clay firing terms, the cone number is a kind of shorthand for the ultimate firing temperature. Cone 10 is approximately 2300 to 2400 degrees Fahrenheit. Reduction means that the work was fired in a kiln environment where the amount of oxygen was limited or reduced. The combination on firing temperature and kiln environment impacts what clays and glazes that can be used as well as effects achieved, but I digress.
When you are first learning a skill or process you don’t know what you don’t know. It wasn ..read more
JillyBeanPottery
3y ago
Making jewelry with my own handmade ceramic components is a fun side project of mine. Occasionally I get the urge to display them to the world, but mostly I do it for me.
I thought I’d share some of my love of ceramic jewelry making with you in a series of fun tutorials! First up, let’s make beads!
I absolutely love making beads. Surprised? You’re probably not the only one since I make them, fire them and then … they just sit in a box or bowl. I have quite the collection of them along with other ceramic jewelry components.
Tools Mentioned!
Wooden Skewer – check the dollar store or online her ..read more
JillyBeanPottery
3y ago
One of the first things you miss as a hand builder when transitioning to a home studio is the slab roller or, at least, it was for me.
I pulled together my tips and tricks of rolling a slab at home for you in this video. Do you have any tips of your own to share? Let me know!
My go-to tools for rolling a slab!
Canvas or duck cloth – available wherever fabric is sold and inexpensive. Get a few yards and then cut to fit your needs.
Wooden trim – available at any home improvement or hardware store. Be sure to get 2!
Rolling pin, extra long!
Even Dough Bands
Thank for checking out my latest vid ..read more
JillyBeanPottery
3y ago
Clay is such a wild material for creating work. It starts as a lump, really as a goop of mud, and can be turned into solid forms that are microwave and dishwasher safe.
How is clay able to go through that dramatic of a transformation?
The answer: compression
Have you ever tried creating with clay? On the wheel? With coils or slabs?
If you have then you have probably discovered that clay is very malleable. You can form almost anything and the construction possibilities are many.
You’ve probably also run into the hard part about working with clay.
When you’ve gone too fast in your creating. Or y ..read more
JillyBeanPottery
3y ago
I don’t think many folks realize that any handmade (or I guess even mass produced) work is generally sanded smooth prior to being sold.
You see, clay shrinks as it dries and gets fired something that quickly can get discouraging when starting to learn building with clay. As the clay shrinks, particles like sand and grog (pre-fired clay that has been ground up) that don’t shrink get revealed causing a roughness in the finished piece.
Check out my quick overview on sanding below! For even more sanding fun, take a look through my past post on the subject here.
I love to use wet/dry sandpaper in ..read more
JillyBeanPottery
3y ago
Water is great for so many things not the least of which is helping us stay hydrated, but, in my humble opinion, not so wonderful when it comes to working with clay.
As I mention in the video, I receive no money (its not an ad) from any of the companies who make the tools I mention – they are all of my own personal choices honed over my years of working with clay. I feel strongly that all of us eventually find the right tools that work best for each of us personally.
Surform Shaver Tool – Also available at your local home improvement store.
Mud Tools Polymer Rib
Some links in my posts may con ..read more
JillyBeanPottery
3y ago
Mishima is one of my favorite techniques in my toolkit. I love how you can create so many different looks using multiple layers of texture and colored slip (liquid clay) or underglaze on the surface of a piece.
In today’s video, I show the final part of the process where the excess underglaze (I’m using AMACO Velvet Underglazes) to reveal the inlaid color. You can see an alternative version of using underglaze in a similar way at the bisque stage here.
This video contains some affiliate links to products used in the demonstration. There is no change in price if you decide to purchase using th ..read more