Hello All, I got into an accident last week, and my 2015 1.5 L is in rough shape. I am still waiting to see if it gets totaled or not. The Right rear suspension is heavily damaged. You can't see it, but the wheel is wobbly. IF the car gets totaled I was wondering about some stuff and am starting to gather some Info. I have a coworker that has a 2013 1.5 L Fusion with the head gasket issue. Mine does not have that issue currently. Would taking my 1.5 L and replacing his 1.5 L be a direct/ minor alteration swap? I seem to remember something about a sensor change at some point. Other than Tim ..read more

Hello, I've been trying to diagnose a P04f0 and haven't had any luck getting rid of it. When I search for "p04f0" here it comes back "Sorry, but no results were returned using the query information you provided. Please redefine your search terms and try again." so it didn't look like there were any other threads on this issue? The car is a 2019 Fusion SE with the 1.5L ecoboost. Car initially had a P0456 and after diagnosing the purge valve solenoid was leaking by unplugging the solenoid electrical connector, vacuum hose and feeling for vacuum to tell it's failed and replacing that code went a ..read more

Hey guys, I've looked all over multiple forums and can't seem to find any wiring diagram that matches the pins I have on the Sony amplifier in my 2019 Ford Fusion (Titanium, non-hybrid). I'd like to do the Forscan mod to switch the outputs to line-level and replace the Sony amp with my own DSPs and amps, but don't know which wires would be the line-level after the mod and which wires go to which speakers. Any help would be greatly appreciated! The attached images show the two connectors, in case it's useful for anyone.   gray1.jpg (Size: 938.99 KB / Downloads: 2)   blu ..read more

i'm trying to remove the outter plastic panels on the outside of my trunklid to prep for paint, but i dont cant really seem to find how to take it apart online anywhere ..read more

I recently retrofitted my Ford Fusion 2013 AWD 2.0 Ecoboost Gasoline, installed the instrument panel (IPC) of the Ford Mustang GT 5.0 2018. Everything worked as it should, but I was missing an important function that I had on my instrument panel previous, TSR (Traffic Sign Recognition), the option exists to be enabled, however, it does not work (I tried using UCDS and FORSCAN). I believe that because the Mustang does not come with this functionality from the factory, the option is locked directly in the EEPROM. So, I did the DUMP of the EEPROM to analyze, but I really don't know where to start ..read more

2016 Fusion Ti 2.0T. Front shocks are starting to leak.   Need to look into replacements.    What is everyone using?  Not finding very good options at the part stores.  RockAuto seems to only carry the FCS.  It appears the reviews are not great for the FCS stuff.   Looking for a rdy strut i can just slap in there.  Any direction is greatly appreciated ..read more

I am looking to install 2013 Ford Fusion SE seats into my 2015 Ford Fusion S The SE has two connectors connecting to the seat and a total of 17 wires. The S has a total of 7 wires I am looking to power the SE power seats so that they can move as well as to have the airbags connected. I cannot find any wiring diagram for the 7 wire setup, can anyone help? What would I need to do to get power to move the power seats?   13e0f08a-c731-42f4-a98b-f86919f69b1f.jpg (Size: 399.75 KB / Downloads: 1)   9543b645-18ec-4015-90f2-33469599831f.jpg (Size: 291.59 KB / Downloads: 1 ..read more

I recently upgraded my 4" sync 1 system to an 8" sync 3 system, with navigation, into my 2013 fusion s. After the install, the sync 3 functions normally except the navigation and gps are 180 degrees off and the map flows bottom to top on the touchscreen (shows north when it should be south,east when it should be west,etc.). The compass in my instrument cluster shows the correct compass direction. After a master reset of the apim, the center display touchscreen will show the correct compass direction and map orientation. Then as soon as you start to move the vehicle, map orientat ..read more

Anybody have any issues with your hood latch sensor going out? I get an intermittent dash notification that the hood is open. Sometimes it clears, sometimes it comes back, sometimes opening and shutting the hood fixes it. I think it's the reason my alarm goes off randomly in the evening. I'm guessing it's loose or there's a broken wire somewhere. Mainly I'm wondering if anyone has gotten to it, and how. I'm pretty sure I see it a couple inches below the secondary latch on the drivers side, but it's not completely obvious how to get to it ..read more

Hoping someone can answer this with more certainty than me. I’ve seen a bunch of comments about the st downpipe fitting the fusion with some modification, is this possible with a 2013 st downpipe and a 2017 2.0 awd fusion? Should I just call the body shop ..read more