Did I damage my hydraulics with too much weight
Tractor Forum » Yanmar
by dabbondo
18h ago
I bought several oak beams/posts. I pulled my tractor with pallet forks up to the truck, level with the rear of the truck, and slid the wood out onto the raise forks. I was able to curl the front, but when I started moving I needed to raise my forks to get past something and noticed they would not go up. The forks did say level though from the truck to the loading spot about 20 ft away. I put the load in place and the front would raise and lower, but it seemed slower than usual. I don't see... Did I damage my hydraulics with too much weight ..read more
Visit website
Part number for ym 3810 D front ring and pinion
Tractor Forum » Yanmar
by Robert Dorigo
5d ago
hello everyone a junk yard told me the pn for the front ring and pinion is 194321-13100 This is in reference to ym3810 D ..read more
Visit website
YM3810 D
Tractor Forum » Yanmar
by Robert Dorigo
1w ago
hello everyone I am having no luck finding a front axel ring and pinion set for this tractor and was wondering if there are other models with the same front axel thanks ..read more
Visit website
Um 3810 D
Tractor Forum » Yanmar
by Robert Dorigo
2w ago
I was wondering if any one knows where I can get a front axle ring gear for my YM3810 D ..read more
Visit website
YM 2500 hitch arm
Tractor Forum » Yanmar
by relayman
3w ago
Hi - the bolt & washer holding the hitch arm on the right fell off my YM 2500. You can see in the attached PDF file a pic showing the splined shaft that goes through the pivot (from blue arrow to blue arrow in the photo below). I need a part breakdown (exploded view) showing what all goes in there so I can make sure to put it back together right. thanks, relayman ..read more
Visit website
Yanmar 226
Tractor Forum » Yanmar
by Stu Mach
3w ago
Yanmar 226 abruptly stopped functioning while back-grading. Engine runs fine, but no engagement to drive or to PTO. Any suggestions are greatly appreciated. Thanks, Stu ..read more
Visit website
Clutch Replacement on Yanmar YM220D
Tractor Forum » Yanmar
by TexasDude
3w ago
First thing to totally go out on my new to me OLD Yanmar YM220D is the CLUTCH!! UGH!! It's likely the original clutch and pressure plate, so I guess it served this tractor well. I can no longer shift it into gear at all without really grinding the gears. I'm thinking this will be a pretty challenging project! First things first, I was very relieved to find the parts readily available through both All States Ag Parts, and Federicks Tractor Parts. Is one of these... Clutch Replacement on Yanmar YM220D ..read more
Visit website
The YTOG is getting enhancements
Tractor Forum » Yanmar
by bmaverick
1M ago
Coming soon, site enhancements. Those who need Yanmar resources for several brands will now be able to experience the enhancements soon. main groups.io Group *Yanmar Tractor Owners Group.* **US models, Gray market models, Cub Cadet models, RK models, even our green siblings known as Deere's. ** *A valuable source for owners of Yanmar tractors.* * * *If you would like to join our group, then click on the +Join This Group button below left. *NOTE: A... yanmar-tractor-owners.groups.io GroupsIO are excited to announce several enhancements to the Groups.io web and app experience, which will ..read more
Visit website
In Search of Parts for an OLD Yanmar YM220D
Tractor Forum » Yanmar
by TexasDude
1M ago
As a new owner of a very OLD Yanmar YM 220D Tractor, I've been searching for parts to replace the brakes and clutch assembly. I watched a few YouTube Videos and discovered Hoye Tractor Parts (aka All States Ag Parts). Just thought I would reach out to see if this place has a good reputation for dependable parts, and good support. There are a lot of "compatibility" concerns when buying parts for a tractor that is over 40 years old. Looking for the good, the bad, and the ugly about finding... In Search of Parts for an OLD Yanmar YM220D ..read more
Visit website
YM1720D Hydraulic return (?) hose coupler
Tractor Forum » Yanmar
by NigelT
1M ago
Does anyone know the specs for this hose? It looks like it should be a reducer from something like 23.5mm down to 22.25mm (rough measurement) over 75 to 100mm. It might be part 194321-48290 (originally). Thanks, Nigel ..read more
Visit website

Follow Tractor Forum » Yanmar on FeedSpot

Continue with Google
Continue with Apple
OR