any of you guys using these for track? my first time attack is in september and replacing ALL the bushings on my car ..read more

Anybody familiar with these, any feedback? Also any idea what these movable things are on the fender brace? Seems weird, not sure what those are? I have front/rear strut braces, full rear lower suspension/brace, front lower subframe brace, and looking to add the 2 final braces which are the fender brace and lower front suspension brace also shown below ..read more

Hi, I was wondering if BF Goodrich Advantage T/A Sport Tires will be good for racing on a road course or oval. The class at the racetrack requires street tires only. Has anyone ever raced mini stock ever and used this tire ..read more

The car is a 2023 Honda Civic Si mostly stock with ktuner stock map, K&N drop in air filter, Precision 70A durometer transmission mount. Stock brake pads and goodyear all season tires. I did not record a time. This is my third time out at the road course. I participated in 2 wet track events and 1 dry this year. As you can tell this is my first time on the main circuit at Summit Point. The videos are on my youtube page. Please feel free to subscribe to my channel. Any points, tips, suggestions to help me become a better driver im open ears. Thank you. www.youtube.com/@smooth_inputs_fast_ ..read more

I am looking to autocross my 2003 accord. k24/5 speed car, it has a factory limited slip diff. Is there any benefit to upgrade to an aftermarket differential? Thank you ..read more

Any input on either of these running a 245/40? Current running a 15x9 upfront on a 225 RC1. I'm limited to a measured 257mm in NASA TT5, thinking 245 on a 9.5" wide is going to be the best route. Really don't want to 5 lug swap the front, but I'll probably have to if I want to go 17x9.5 as I don't see a 4x100 out there in a decent track wheel. Plenty of 17x10 options, which I would do if I wasn't restrained to staying under 257mm measured. I'm guessing I'll need to space out my fenders(not much info out there on doing that either, but looks straight forward I guess ..read more

I figured I would share my experience, in the event someone is looking to run the same setup. I have a 1996 Acura Integra GS-R (DC2) running the stock B18C1 engine and a B16b JDM Type R transmission. In order to run a wider set of front wheels, I need to run a spacer. Unfortunately, I don't have enough thread on the studs for me to feel comfortable adding the spacer I need. So, I decided to run ARP wheel studs (part 100-7711). I didn't want to cut up my stock knuckles, and I heard that some of the DuraGo hubs (what's currently on the car and the only cheap hubs available for the DC2) come wit ..read more

Honda has discontinued the factory hubs Has anyone used Durago hubs on track? I bought Durago front hubs for both eg and ef and the Durago wheel studs are not the same size anymore as the old honda. The Durago stud holes are bigger so the Honda 88-2000 Arp will not fit. Any idea what fits these bigger wheel stud holes ..read more

Hey all, I have a tucked radiator on my 91 Civic STD that I will be using for track days and autocross. When I built it, I just put an inline filler in the upper coolant hose. I am looking at the two options below to replace it. what benefits would there be to spending a little extra on the one with the fill pot? Does anyone have first hand experience with either of these? Engine is B16a3. Thanks ..read more

So I’m able to jump the blue connector of the OB1 but I don’t have a dash board. My question is where on the fuse panel or equivalent would I be able to wire in a light to see my codes. 1993 Accord. F22A6. Thanks ..read more