The Quirk: The lamp usage timer will show 0H or zero hours once it resets, however, it will remain at 0H and will not appear to be counting hours for the first 10 hours or so. Don’t worry, after it’s reached more than 10H, it will start counting the hours and show the total. Don’t ask us why Epson programmed the timer to function this way. Keep this quirk in mind, since many people think that the lamp is broken, or something is not working when in fact this is perfectly normal ..read more

*If you let the projector run past the 1600-hour mark, then your projector (NEC LT220, LT240, and LT260) will not turn on until you have performed the secret reset. You will need the original remote control to do this. On the remote, press and hold the [Help] button for 10 seconds (or longer) and the lamp clock will reset to zero. You will now be able to turn on the projector. Once you have installed the new lamp, make sure the lamp access panel door is closed. The projector will not turn on unless the access panel door is closed ..read more

Lastly, always replace your old lamp when you receive a new lamp. This is because your new lamp’s warranty starts right away, so use the warranty period effectively and test if the lamp is functioning well. Put it into your projector as soon as you receive it. If the lamp was damaged upon transport or you received the wrong lamp or you ordered the wrong lamp to begin with, then it might not work when you open the box and try to install it. You can also keep your old lamp even if it’s dim, it will make a good backup if the new lamp fails ..read more

*If the lamp hours are low, then it will show 0H or zero hours ..read more

Short-throw projectors are space-saving, easy to install (require less space), easy to transport (smaller and lighter) and there is less likelihood of the projector casting shadows or glare on the screen ..read more

Overall, when choosing a projector for gaming, you want to look for one with high resolution, low input lag, high brightness, high contrast ratio, and the ability to project an image the size you want from the distance you have available ..read more

If you cannot solve it yourself, then call us at 1-888-785-2677. Our friendly and knowledgeable customer service representatives can help diagnose the issue and go through the manual with you to determine the problem. We can also help you find the correct replacement lamp if the lamp needs replacing ..read more

If you already have a projector ready to go for viewing the Superbowl and the lamp needs replacing, This Optoma model ticks all of the boxes while costing a lot less than its competitors.  It is a 4K projector that offers 3,400 lumens, and has a 50,000 to 1 contrast ratio.  The Optoma HD27HDR is bright enough to light up a 140-inch screen in the dark or a 100-inch screen in ambient light. has you covered with an unbeatable selection of high-quality replacement lamps at low, affordable prices.  Shop with us today and save ..read more

3.) Write down the current hours of your existing lamp before immediately replacing your old lamp. If the old lamp is still working, keep it as a backup.  ..read more

Expert Tip: BenQ and Optoma projectors are known to use a prism at the front of most of their lamps. If you are experiencing color issues, call MyProjectorLamps support:1-888-785-2677 We can guide you through the process, so you don’t have to spend money on a repair that doesn’t necessarily need to happen ..read more