Ultrasonic Cleaning for the Aeronautical Industry. When we talk about aircraft engine maintenance, we think of high-level performance requirements in the industry. The cleaning result must be perfect on both the outside and the inside of the piece, achieving the best cleaning results in both cases. In addition, it is crucial to ensure the mechanical integrity of the components and the safety of the crew and passengers. The mechanical aeronautical parts have different geometrical complexities. It is a challenge to achieve perfect results using traditional methods and it will be an extra cost fo ..read more

Industrial Coffee Filter Maintenance Filter cleaning example Valencia, 8th August 2022   In UltraTecno we want to share one our latest tests carried out using our ACM-300E equipment. Some time ago, we came to discover the problem when coffee filters were to be reused in the production process of the coffee industry. These filters ended up very dirty due to the burned coffee remains. This dirt would accumulate on the walls and other orifices – this would prevent the correct functioning. The photo below shows pieces before cleaning: On observing the evidence, we came to the conclusion tha ..read more

The production of cannabis for the medical industry is becoming increasingly worldwide. The objective of these companies is the elaboration -extraction- of the cannabinoid component to treat chronic diseases, pain, muscular rigidity, nausea, lack of appetite and other diseases. In Spain, the strict entry obstacles into the cannabinoid industry set by The Spanish Medicine Agency hinder the appearance and growth of new companies that want to operate in the cannabis sector. Being a relatively new industry, it is not easy to obtain an operating license. The medical cannabis industry is in constan ..read more

Ultratecno wants to announce its collaboration with Técnico Solar Boat, offering its support to their project. We are proud of the innovative spirit demonstrated by these young engineers in order to achieve their dreams. A Little Bit About Técnico Solar Boat Técnico Solar Boat was established by engineering students from the Instituto Superior Técnico, in Lisbon. They work together on the development of manned competition vessels powered exclusively by solar energy and hydrogen in an open-source mode and happily provide information about their prototypes. Nowadays They have recently f ..read more

SAFETY You rims have the function of protecting your tires and axels from the brake dust and dirt. Your car rims and tires need to be protected against the corrosion caused by this dirt. To prevent the future damage-repair expenses of your wheels, it is necessary to ensure regular cleaning. DURABILITY If you regularly clean you rims and tires, you will ensure the best lifespan. The cleaning frequency is very important in order to avoid the corrosive dirt and other corrosive materials accumulated on you wheels, ensuring the best vehicle performance. ATTRACTIVENESS The appearance of you ..read more

There are two industrial cleaning technologies which look very similar, but in terms of the result, efficiency and savings there are huge differences. The two technologies are blasting cleaning equipment and ultrasonic cleaning. The most common blasting equipments are sand blasters, shot blasters and wheel blasting. Each of various blasting methods aims for surface preparation and treatment. Such a treatment is executed previously to the application of any type of coating and paint. It is necessary cleaning of the surface to ensure that the application adheres well, being of utmost the elimina ..read more

One of the industrial techniques for cleaning industrial equipment and facilities is cleaning with chemical products. Chemical cleaning consists of performing cleaning cycles by circulating chemical products in pipes, condensers, tanks etc. Chemical cleaning can be done by dipping or by applying chemicals in a closed circuit. The choice of chemical products depends on the type of material to be cleaned and the scale to be removed from a given type of equipment. The chemical solutions used are alkaline, acid or solvent detergents. Chemical cleaning is necessary when incrustations impede the pro ..read more

Industrial cleaning is usefull for the cleaning of large quantities of new parts, for subsequent assembly or for surface treatment such as painting, heat treatment or galvanising. It is also necessary for the maintenance of tools and components. Maintenance and preventive cleaning of a production line allow to achieve excellence in production quality and processes. It also avoid loss of time and costs due to interruptions. Industrial equipment and facilities for high pressure water, chemical dipping or ultrasound cleaning are nowadays indispensable in order to obtain the quality of the finishe ..read more

Industrial cleaning is going through an era of change, as manual cleaning tends to be replaced by more automated cleaning, as by industrial equipments. The reason is the companies’ need to standardize industrial cleaning process. There is a need to always reproduce the same results and to accurately quantify the material and human resources involved in the cleaning process. In other words, an automatic industrial equipment allows companies to have control of the cleaning results and their costs. The operator who cleans manually – even if he does an industrial cleaning using tools and chemic ..read more

We would like to compare two modern and green technologies of industrial cleaning: dry ice blasting and ultrasonic cleaning. As the definition says, dry ice blasting is a specific type of carbon dioxide cleaning.  In this cleaning technology, dry ice, the solid form of carbon dioxide, is accelerated by high pressure air stream and directed at a surface in order to clean it. In other words, we can say that dry ice pieces are blasting dirty surface. The main advantage of dry ice blasting is that does not accumulate contaminants; there is no need for chemicals to be used. Af ..read more