Hello all , I have water damage over the cab of my class c and I just replaced the wood and I have to glue the filon to the wood what do I adhere it with? Thanks , John ..read more

My bedroom slide-out moves perfectly but once in the extended position, it creeps back almost immediately. I'm going to check the hydraulic fluid level, but it has plenty of fluid to slide out. Where do I find the valve to keep this out ..read more

Hi, I have read so many blogs about changing to lithiums that my head hurts and I’m more confused. My agms have died, so if I’m going to change, now is the time. Option 1 seems to be fit two 100ah lithiums and do nothing else, the PD9245 will keep the batteries at around 80% , buy the pendent and once per month use the pendant to put 14.4v in for 4 hours. 2 seems to be fit the lithiums AND change the PD9245 to a PD9145 lithium charger and all will be good BUT some say this will keep the lithiums at 100% and that is bad. Does the PD9245 / PD9145 charge the start battery as well? 14.4 will coo ..read more

I just had my frame fixed by Jeff, the owner of Windshield Magic in Quartzsite, AZ. I drove 1600 miles to Quartzsite and it was worth every mile and every dollar I spent on gas! Jeff did a phenominal job and had it finished in three hours. I did not need to have any of the frame cut out. I highly recommend Jeff if you ever need this work done. He will be moving his business to Idaho once he finds a place but will still be going to 41West Main Street in Quartzsite in the winter. Look him up, you wont regret it! Happy Travels ..read more

Looking for parts for Euroloft bed for winnie sunstar 2018. Power controller , plastic box attached to bracket close to motor that harness plugs into. Motor tests good, key switch up/ down buttons faintly flash green when pressed. Have power to main harness then I lose power from power controller. Switch is good, motor good. So I'm assuming a bad power controller. Continuity good through harness. Does power controller sound like problem? Any thoughts/ help appreciated ..read more

greetings I want to access the back of each TV to install an HDMI cable. One in main living above fireplace, second in bedrm, third exterior. Not possible to just reach the hand behind units. Ideas? thx in advance Don ..read more

Does anyone know the procedure for getting the indoor blower motor and squirrel cage out of the unit? I have the ac unit removed from the coach. I need to replace indoor blower motor cage and or bearings. Seems Duners links on google no longer work. Thx ..read more

Rest of family would like to watch a movie while traveling. The right side outlet will run off inverter which is for the DVD player. Left side is for TV and does not have juice when ignition is on. Is there a switch to be thrown somewhere? Strange one side stays powered but not the other. Leaving tonight to head to VA. I know it's not happening tonight, but I can play with it more when we get there for the return trip. Thought I had hit a home run with the inverter until I turned ignition on ..read more

2009 Winne Journey 34Y The 2 dash ac condenser fans mounted drivers side rear are not coming on. Fans, relays all ok chased problem to the dash ac pressure binary switch under the hood being bad and cannot find a replacement. The part is 032-00384. I have one A/C parts source asking me for the thread size and the open and close ratings?? Any ideas ..read more

07 Winnebago Adventurer. Basement heat pump/air conditioner stopped working. Any ideas/help re repair appreciated ..read more