VW Vortex Forum » VAG-COM Diagnostic
29 FOLLOWERS
Discussion for the VAG-COM Diagnostic program can be found in this section of the forum. Talk about issues with the electronic parking brake, and get help with troubleshooting VCDS codes.
VW Vortex Forum » VAG-COM Diagnostic
3d ago
Ok - so I was in my vag-com trying to get the horn not to beep when I lock my car because a lot of times my wife is sleeping when I get home and I park right below the bedroom window. I found the setting in the 09 Menu, and disabled it with the long coding and it worked. I then found the box to reduce the beep from 40ms to 20ms. I turned this on to see how much of a difference it made. However, Im finding that when I press the lock button on the FOB one time, it short beeps and...
Horn Beep on Lock ..read more
VW Vortex Forum » VAG-COM Diagnostic
3d ago
Like the title say golf 5 gti bwa stage 2 (290hp) k04 , fmic , stock injectors (didn't want to upgrade don't need to much power) on dyno boost leak only manage 1 bar aprox . They said dv leak ,changed, change the MAF , change the boost pressure on turbo , change the engine recheck everything to be tight, check hose's , at full acceleration it's go 1.5(1.7 max) after I hear how get out the presure and stay at 1 bar , I make some logs help me interpretation , don't be mean with me it's first...
G5 gti boost leak help read log ..read more
VW Vortex Forum » VAG-COM Diagnostic
1w ago
Hey guys, so when I'm working away I take the battery off my van so it doesn't run flat. I've come back, attached connected the battery and now it won't start. Immobiliser light is flashing on the dash, and after reading the code with VCDS-Lite, it's the immobiliser.
My question is, how can it do that, when nothing has changed? We had a good bit of rain while I was away, but everything in the cab feels dry and no signs of mould. I've got 2 keys, both don't work. Is there a way to reconnect...
VW LT 35 Van randomly immobilised, fault code 01176 (key ..read more
VW Vortex Forum » VAG-COM Diagnostic
1w ago
Did my first scan today. I'm going to start reading through it and figuring out what needs attention..
Things I need to research
-I retrofitted the MFSW to the car, need to see if I need to do any coding (everything already works)
-I retrofitted a euro headlight switch (everything works but I need to run the trigger wire to separate the DRL from the Lowbeams
-I added Golf R seats. I have a harness coming to power the lumbar and heat- Need to see if programming is needed
-I have a harness...
My First Scan ..read more
VW Vortex Forum » VAG-COM Diagnostic
1w ago
Hi!
I'm having the following error:
17977 - Cruise Control Switch (E45): Implausible Signal
P1569 - 35-00 -
The full scan is included below, for reference. Here are the block 66 results(bits referenced from right, 0-7):
The 2004 Audi TT gives 8 bit responses in block 66, field 2 and 4.
Both brake pedal and brake light switches turn on and off in field 2 (bits 0, 1). Clutch switch turns on and off(bit 2), and CSS Active in ECM(bit 3) is on.
The switches on the stalk (on...
Help with Cruise Control (block 66) Diagnostics on TT ..read more
VW Vortex Forum » VAG-COM Diagnostic
2w ago
Hello,
2015 US-Spec GTI, bi-xenon headlight housings with H7 cornering lamps (halogen). I recently "upgraded" the bulbs to LED, but now I am getting an occasional "bulb out" warning. I know each bulb "type" can be changed via VCDS as I have done this in the past with the license plate bulbs, brake lights, etc. but I cannot for the life of me find the "channel" for the cornering bulbs. I am NOT talking about the fog light modules nor the U-shaped LED running lights. I am specifically talking...
MK7 GTI, Changing H7 cornering bulb light type ..read more
VW Vortex Forum » VAG-COM Diagnostic
2w ago
I have a HEX+CAN dongle for sale, can I advertise it here? Been searching for best way to do this. Thanks ..read more
VW Vortex Forum » VAG-COM Diagnostic
2w ago
Hello I am in need of someone with a vagcom in or near Baltimore.
need to get the p/n off of the ecu on a 2006 jetta
if anyone can help please lmk ..read more
VW Vortex Forum » VAG-COM Diagnostic
2w ago
recent scan on '14 jetta sportwagon that failed NY inspection
Code:
Thursday,18,April,2024,19:29:45:16237
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 23.11.0.0 (x64)
Data version: 20240322 DS351.0
[URL='http://www.Ross-Tech.com']www.Ross-Tech.com[/URL]
VIN: 3VWPP7AJ8EM608442 License Plate:
Mileage: 257270km-159860mi Repair Order:
--------------------------------------------------------------------------------...
Evap leak (mil) and assorted other faults ..read more
VW Vortex Forum » VAG-COM Diagnostic
2w ago
Hello
i hawe Auda a4 and i hawe problem with key i tested car with ross tech vag com and i get this result PLEASE HELP me what to do..
win wauzzz8dzva011904
adress 25 immobilizer
controller 4a0 953 234 f
component immo auz9z0t6872363 d77
coding 00000
shop wsc 00001
1 fault fond
01176 key
07-10 signal too low intermittent ..read more