RC10Talk Forum » Traxxas
23 FOLLOWERS
This is a place for all things Traxxas. Ask questions on gear options, layshaft parts, Traxxas bullet rebuilding, and more. RC10Talk Forum is the largest vintage community of RC enthusiasts.
RC10Talk Forum » Traxxas
1w ago
Yes. The blue Eagle LS and Rustler share the same part numbers for the outdrives, driveshafts, and stub axles. Rear arms are the same length between the two as well ..read more
RC10Talk Forum » Traxxas
1w ago
Older Losi springs, the larger size Tamiya CVA's, and maybe ECX (slightly larger than AE). Alternatively, you could use a spring collar and different cups, allowing you to use larger springs ..read more
RC10Talk Forum » Traxxas
1w ago
Gathering. I still gotta dig some shock bodies out, misc. hardware, etc. Kinda floundering on replica vs. variation on the prototype...nothing is perfect I guess. Anyway. Still need to determine some rear hole locating (bulkhead attachment) for the... Looks like a TRX-1 on a TRX-3 prototype chassis from the limited pics. So not going to be a true replica ..read more
RC10Talk Forum » Traxxas
1w ago
Small update for today - I tweaked the design of the transmission case a bit. The main thing I did was beefing up where the shock tower mounts. I angled the back of the mount so its thicker towards the base. I also printed a new case in a PC blend ..read more
RC10Talk Forum » Traxxas
1w ago
Another beautiful build from you. I really like the short chassis. The TRX1 is such a great looking car. Hydrating the nylon parts. I don't think I will be peroxiding any parts. IIRC, some of the parts (rear bulkhead, trans. case, etc.) are what ..read more
RC10Talk Forum » Traxxas
1w ago
Now the airflow through the fins is wrong :lol: This is a shelfer so it won't matter, and I did think about that when installing, but those sinks are so large, and that body so open, I don't think it would be a functional issue if it were run. :D ..read more
RC10Talk Forum » Traxxas
1w ago
Yeah, wasn't paying attention to part numbers. When you stated steel my mind went to the hardened aluminum idler like you posted last. Thats the only way I've ever built them that they lasted anyway. Wasn't thinkin steel ..read more
RC10Talk Forum » Traxxas
1w ago
Another piece of the puzzle, incognito black steering set from Factory Works. I'm struggling to find someone who has 2.5mm black G10 here. Ebay has G10 sheets but they are all 300mm and I need 330mm :roll ..read more
RC10Talk Forum » Traxxas
1w ago
Great build. Could you post your settings of the turnbuckles and toe links please Thanks, not too much adjustment on these but this is what I ran. The steering rack is a standard Factory Works steering rack, all I did was shim it to eliminate ..read more
RC10Talk Forum » Traxxas
3w ago
In that case, don't forget that those servos are wired in the old Airtronics pinout. Using them in a standard format (Futaba/JR/Hitec type) receiver will definitely fry the servo and possibly the receiver. Re-pin it to the correct format or just ..read more