UTV BOARD Forum » Cub Cadet UTV SxS
19 FOLLOWERS
This forum is for all of you Cub Cadet UTV, SxS (Side by Side) owners. Further, get discussions about Cub Cadet UTV with specific topics including Challenger and Volunteer models.
UTV BOARD Forum » Cub Cadet UTV SxS
2M ago
I bought a 2013 Cub Cadet Volunteer 37BM466D710. It has a LH775 engine in it. Now my issue is I bought it off an online auction and well I got took really hard. There is no CVT/transmission in it at all. There is a complete motor but that's it. Don't even know if the motor is any good. Anyway, I can't seem to find any real helpful information about all the parts missing. The parts diagrams don't seem to really help me. Does anyone have one or have in info or a place for me to get good info from.  ..read more
UTV BOARD Forum » Cub Cadet UTV SxS
3M ago
Bought a used 4x4, engine runs. Tried rebuilding both pulleys. Ended up buying a transmission pulley system. The new one is aftermarket. The old one wallowed out and fell off.
The new one seems not to have enough splines inside. Seems like it is freewheeling. When it revs up and gets smaller pulley diameter, does it jump on the spline shaft? The driver pulley on the engine gets larger when it revs up. Had to make a pvc collar for the belt to sit on in the grove. No parts for sale on this pulley. Is the belt supposed to sit at the bottom? There must be a trick to get the belt on. Any ideas?
&nb ..read more
UTV BOARD Forum » Cub Cadet UTV SxS
8M ago
Looking for a an alternate besides going to Cub Cadet. Need the steering knuckle that connects power steering rack.  ..read more
UTV BOARD Forum » Cub Cadet UTV SxS
8M ago
Anyone know if there is a replacement bulb/kit that is white light or led white for a Cub Cadet 750 challenger crew - model 37AY8CLD710 ..read more
UTV BOARD Forum » Cub Cadet UTV SxS
8M ago
As I tried to do a conversion with the Yamaha 660 motor, I realized the 660 was never fuel injected so it would not work for the fuel injected hisun motor swap. But the good thing is the hisun 750 motor is a clone of the 660 Yamaha but with the components for the fuel injection (cam/crank position sensor). So that left me with a new rebuilt Yamaha 660 and still a broke 750 hisun motor. I took apart 750 think the timing chain had broke from all that I've heard about these motors. The chain was not broke, but just off cam and crank gears! The chain tensioner was at fault! I've ordered Yama ..read more
UTV BOARD Forum » Cub Cadet UTV SxS
11M ago
Hi All,
New here and need help finding a windshield and a hard roof for a ;
2006 Cub Cadet Volunteer ( gas ). All the places I have checked on the web only go back to 2007. Any and all input would be very helpful.
Thanks ..read more
UTV BOARD Forum » Cub Cadet UTV SxS
1y ago
Hi. Ive been searching for a wiring diagram, hopefully with photos, part #s so I can try to repair damage from rats eating wiring over the winter on the M550 cub cadet UTV. (sigh). haven't had any luck. i have a plug with dangling wires from under seat, next to battery compartment and hope to take to dealers to see if he can order replacement and hopefully it comes with long enough wires that i can splice back into remaining wires. not going to be easy. I'm not sure if there is any more damage, but would have to disassemble to get to bare chassis. sigh. not sure I can do all that, but just try ..read more
UTV BOARD Forum » Cub Cadet UTV SxS
1y ago
I have a 2017 Cub Cadet Challenger 750 and I have been watching videos on the top end rebuild of the same engine. So, I have one question about it and I’m not sure if someone could help or not. I’m having trouble getting mine to fire over. Could anyone explain how to set the timing on both the flywheel and the cam? I think I may be setting the cam in an incorrect direction. When I put my foot on the brake to start the engine turns over and I have spark and fuel but I cannot get it to fire. The timing chain was off at first and I reinstalled it and tightened it with the tensioner and everything ..read more
UTV BOARD Forum » Cub Cadet UTV SxS
1y ago
Part # 619-04137B has been on a nationwide backorder for months. Customer service could care less. Anybody have any suggestions ..read more
UTV BOARD Forum » Cub Cadet UTV SxS
1y ago
Was using the machine all day to haul wood...no issues until the end...
When I try to start it, the dash lights come on but starter does not...seems like no power to the starter.
It is in park, but when I put the brake on to start, it registers N.
Won't start in neutral either...
Tried rocking it, did not help...
Help ..read more