Nissan Frontier/Xterra Titan Swap SPC Arms The answer to this question ultimately comes down to you chose to lift your vehicle.  ..read more

If you’re interested in following our adventures, our Instagram handle is                  b.  No installation and our facebook group is                 d.  You can walk away from the vehicle and still maintain coms                 e.  Your spotter can hold his radio and guide you via radio ..read more

We've selected three offroading clubs across the US who share our passion for conservation, offroading, and adventure ..read more

Note that measurements provided are in inches and that these measurements are eye-to-eye or eye-to-stem measurements as provideded by a manufacturer.  Also note for Toyota 120 and 150 Series applications the Toyota 4Runner was used and for some applications some manufacturers may call for a differing partnumber (there may be differences in valving but the lengths are the same from T4R to FJ to GX).   ..read more

To help make this project a reality we've applied for and been awarded a grant from the State of Nebraska.  We're really excited for this project.  Help us get the word out there and help us make this project a reality ..read more

Keep in mind this chart is for reference purposes only.     along with adjustable lower control arm bolts, it's possible to shift the lower control arm fully forward to give clearance.  right now.  We've defined tire width but we haven't defined are manufactured to specific dimensions which include: .  Tire height is represented as a percentage of the - for instance, the "75" in the given example means that the tire height is a value that is 75% of the .  The final series represents the the tire is manufactured to fit - for instance, a 16" diameter wheel.&nbs ..read more

When it comes to lifted vehicles, camber bolts or "cam bolts" have more functions than merely getting a good alignment.  Cam bolts, when properly configured, can allow you to add positive caster to your alignment from the lower control arms.  This allows you to shift your tire forward in the wheel well to allow you to fit larger tires with less fender melting/trimming.  The same principle applies for our  ADO Cam Bolt Lockout / Cam Bolt Delete Kit , which the visuals in this write up are modeled after.  When setting your alignment for a lifted vehicle, you ideally want ..read more

We will have kits listed for the 2020+ Frontier in the near future, stay tuned ..read more

Coils are a much safer and better means of lifting these trucks and that’s why we created the Rckilla as a lower-cost alternative to a full lift kit.  The LCA is connected to the spindle of the truck, which in turn is connected to the upper control arm (UCA). When you add a spacer and push the LCA further downward, you’re pulling the UCA with it ..read more