UTV mirrors
Tundra Talk » Tundra 4x4 / Off-Road Tech
by Dwerellim
1M ago
I've installed the Kemimoto UTV mirrors in my UTV to replace one that would not stay in place.This one give great views and tightens down nicely, but you have to take them down evenly or it gets bound up. Just an all around great mirror ..read more
Visit website
35" tires
Tundra Talk » Tundra 4x4 / Off-Road Tech
by nicholson.joshua10
1M ago
I went and put 35's on my 2009 tundra TRD today and at highway speeds 70 to 75mph it wouldn't shift into 5th. It stayed about 3500 to 4000 rpm. It's had 35's on it before. Is it a gearing issue ? I hear a lot of people say 35's and no issue . Idk if I need to drive it more. Have it tuned to 35" tires and change shifting points or just re gear it ..read more
Visit website
UTV tool box suggestions
Tundra Talk » Tundra 4x4 / Off-Road Tech
by mcraezy87
2M ago
What’s everyone using for UTV tool box ideas. Been eyeing the kemimoto tool box. Anyone have any reviews on this or opinions. Wondering what the useable size inside is like. Mainly want to place a small cooler inside and Coleman stove and few odd and ends. Anyone have any better ideas ..read more
Visit website
UTV windshields
Tundra Talk » Tundra 4x4 / Off-Road Tech
by Rickvans
3M ago
Picked up my UTV today. First additions will be a roof and a windshield. I am wondering if you are using a half or full windshield for utv and why you prefer one over the other. I am thinking of getting a full with the flip up option so I have rain protection when I need it. Thanks in advanced for any suggestions ..read more
Visit website
Is there a way to engage all 4 wheels if stuck?
Tundra Talk » Tundra 4x4 / Off-Road Tech
by parisglob
3M ago
Apologies if this has been asked before... I've done some digging but really don't see an answer. I just got stuck in the snow and had to be pulled out. What was frustrating is, only one wheel would spin, the others would have probably got me out but they did not seem to engage. I tried 4low and turning the traction controls off.. What gives and is there a work around ..read more
Visit website
6” rough country suspension lift
Tundra Talk » Tundra 4x4 / Off-Road Tech
by Skinnygeek95
3M ago
Update: I have a 2nd gen tundra 2wd. I’m going to be putting on a 6” rough country lift with upgraded shocks (M1 shocks, M1 struts) I’m going to be fitting 37’s 12.50r18 +18 offset. Without a doubt cab mount chop and body mount, which is no problem. The questions that many people have is ‘what size tires can you fit and wheels with offset’? On DESKTOP version of rough countries website they have up to 35” 11.5 wide 18” will only fit. But sense I want the look of more rugged looking, beefy... 6” rough country suspension lift ..read more
Visit website
ARB twin Air Compressor inop
Tundra Talk » Tundra 4x4 / Off-Road Tech
by osidepunker
9M ago
Last weekend while filling my tires, my air compressor became intermittent for a minute or two and then failed to pressurize. Manifold pressure is zero and the cooling fan is running, but the compressor motors do not turn on. At first I thought it overheated. It was about 90 degrees outside. However, I have successfully filled all four tires in 105 degree heat so this didnt make sense to me. Drove home with 25psi in the rear and a partial fill on one front tire. The Truck sat for the last... ARB twin Air Compressor inop ..read more
Visit website
3rd Gen Tundra Slider Group Buy?
Tundra Talk » Tundra 4x4 / Off-Road Tech
by Trailsandtrucks
10M ago
Hey guys! Just picked up our new 2023 Tundra and recently outfitted it with the whole new line of True North Fabrications armor. We are absolutely loving these new rock sliders from them (they make for an awesome step) and wanted to see if there was any interest in doing a group buy for everyone. Comment below if you'd be interested! The more people we get, the bigger the discount! ... 3rd Gen Tundra Slider Group Buy ..read more
Visit website
Gearing with a lift
Tundra Talk » Tundra 4x4 / Off-Road Tech
by 08CMAX
10M ago
So Ive heard the gearing in the differential is important for power and fuel economy. Can anyone explain this to me and/or tell me if I should be paying to have mine changed. I have an 08 CM 5.7L with a 6" procomp lift...20" wheels and 35s. Thanks in advance ..read more
Visit website
Has anyone used Iron Bull bumpers?
Tundra Talk » Tundra 4x4 / Off-Road Tech
by Hawgcaller
10M ago
I am researching mods for an upcoming purchase, and was at their web site looking at their products. I used the contact email form, but did not receive any replies. About a week later I called them to the number listed on their web site that states they are manned 24/7. I got voice mail stating that they were on the phone with another customer, and would return my call, so I left my contact info, but nothing yet and it has been over a week. If this is an indication of their customer service... Has anyone used Iron Bull bumpers ..read more
Visit website

Follow Tundra Talk » Tundra 4x4 / Off-Road Tech on FeedSpot

Continue with Google
Continue with Apple
OR