Curious if anyone has installed a rear sway bar on a 66/67 Charger and if so what kit was used. My car sways ALOT granite I haven’t insta The front one yet due to previous owner cutting off brackets on front controls arms when making it a drag car. I do have everything for front just need to do some welding. Thanks in advance ..read more

I'm putting my 67 Charger back together and I need to know what type of bulb fits into the license plate light socket? My part number is 257-5075. Any help is appreciated ..read more

I'm in the process of installing the Sniper 2 and it calls for a clean wire that is switched and is hot while cranking. The only ones I can find are off the ignition key and they are used for other things and I'm not seeing one from the fuse box. I have the stock fuse box, key and ignition. Anybody have any ideas? Thanks in advance, Evan ..read more

Hi all. I´m in the process of repair funcionality and renew the gauges faces. I have get all the gauges working a polished gauge surfaces from almost white to total black. The only thing resting is a needle that only glows half lenght sometimes, sometimes glows complete. I think it must be a circular haircrack around the neddle. My solution would be to scrape the orange paint and aply a light coat of conductive paint in that area, and then coat with new paint. I don´t know if it´s the... Read more ..read more

Hey all, I have fully rebuilt my 1966 Charger. I rebuilt the wiring harnesses as well, nose to tail. Everything is up and functioning except the Temperature and Oil Pressure gauges. Both sensors are NEW. I think I should be getting about 5v at the sensors since the wiring diag. shows 5v. What I see with my voltmeter is fluctuating 0 to 5v. The power comes from the fuel gauge and that gauge is working. Cold, the temp sensor reads zero ohms. Warm, it reads 10 ohms which implies it is... Read more ..read more

The rear seats are side specific. The bottoms are obvious but how do you know which side goes on the tops? (I don’t have the old vinyl for reference) One seam is straight and one is curved, which side goes on the console side ..read more

For those of you that did your own seats, did you use cotton padding in the rear tops like original or did you use some kind of foam? I tried using some 1” high density foam but it seems to be too thick ..read more

I was looking at the attached 1967 Charger You Tube video from Hardwood Motors and I saw a Chrysler Pentastar emblem on the left side rear tailight lense. I have never seen that before and the description of the car siad it was an original one owner car from Arizona. I have posted a few screenshots of the video and the video link. Would you all agree that the owner placed this pentastar emblem on the taillight rather than it coming from the factory? Let me know your thoughts. Check it... Read more ..read more

Hay, Anyone interested in a set of seat medallions? I am not selling and don't need but know of a guy that is. On FB so hopefully is legitimate ..read more

Hello, I have some questions on shades of red used in 66 chargers. Fender tag reads P4R Red Vinyl . Q = Dark Red top of door paint. T= Dark red stripe. My question is my seats , carpet and interior door paint are dark red almost maroon , this is a one owner car with original interior . I ordered some seat covers form PG Classic and they are bright red not even close to the color of my interior My carpet is also a dark red/ maroon along with the dash and door panels. I included a couple... Read more ..read more