My camaro over heats for about a couple minutes, then shoots back down... doesnt do it everyday, what can be the issue ..read more

Hello, I replaced my steering wheel on my 2011 with a quick release and now all my traction control and stibilitrack lights are on, is there any way to fix this? Instructions ann picture are greatly appreciated, thank you ..read more

Have a 2001 Chevrolet Camaro currently the check engine light is on for a P0650 mil control circuit/open that won’t go away. I believe it’s something electrical with the car because we have had issues with the PCM losing contact with the car and so we’ve changed the PCM in it and before that we never had the check engine light P0650. and since changing it, the communication issues have stopped, but now the check engine light is on for P0650. I don’t know if it’s any correlation but when you... Voltage/ check engine light issue ..read more

Yesterday at the track the car started sputtering and the SES light flashing (tell tale sign of a misfire). Brought it home to find it was throwing the P0300 (random multiple misfire) code. It has me stumped right now because almost the entire ignition system plus a few other parts are virtually brand new. I just did a tune up less than 1,000 miles ago consisting of spark plugs, MSD wires, fuel filter and o2 sensors. The coil packs had all been replaced on the last misfire problem ~10,000... The dreaded P0300 code ..read more

Hi I'm new to the community here, but my left side speakers always work (recently have started to not work) and my right side never works, any ideas on what it could be ..read more

While I am replacing the fuel pump, I thought this would be a good time to swap out my 1995 Camaro's rear end for an identical used one. Mine started making a howling/whirring noise 5+ yrs ago, and has sat in my garage since I confirmed it was the rear diff or bearings. My plan had been to replace it. There was a local store I've sourced a few Camaro-specific parts thru over the years that always had extra rear axles, but I just found out they went out of business a couple yrs ago. With... 95 Rear Differential Rebuild ..read more

Sorry I'm sure this has been posted before but I couldn't find anything, I just bought a 98' TA, it has the ws6 badges on it, BUT it doesn't have ws6 listed in the product codes on the door, it has ws9 instead, what exactly does this mean? How could I tell if it's a "true" ws6? thanks in advance ..read more

So I keep blowing the gauge fuse on my 1998 z28. And every time I do the car doesn't start. Does anyone have any ideas to what might be causing this ..read more

hi, new to this site I see a lot of discussions about power windows-I just replaced both Left and Right window motors and regulators with new drivers works great passenger only goes up, I checked old unit it does same on switch-I put 12 bolts to the terminals and the motor works both directions-I switched polarity I changed switch same result-so I read on here about power window control module-also I read about radio becomes intermittent then quits someone said some about a BCM? Any help... 1998 z28 passenger window goes up not down ..read more

I have had this car for a little over a year took it to the shop to get the codes figured out and they lowkey scammed me. "Rebuilt the engine" and didn't even address the oil pressure issue I had with it or my p0420 code l've been desperately trying to get rid of. Its also had a p0300 code they completely forgot about. Spent like 4-5k on it got a new clutch and with it and spark plugs with I believe a icm. After the "rebuild" I saw metal in the oil after the break in or way more metal then... 1999 Chevy Camaro v6 manual troubles ..read more