Wayalife » Jeep JK Wrangler
101 FOLLOWERS
If you've got a 2007-11 Jeep JK Wrangler with a 3.8L engine or a newer 2012-up with a 3.6L engine and have questions you'd like to ask or have information you'd like to share regarding them, please post up in this forum.
Wayalife » Jeep JK Wrangler
1w ago
I recently discovered that the Rubicon has line lock from the factory. I have a Superchips Traildash 3 tuner and on the crawl page you can lock the front or rear brakes or both when winching but I cannot use that function because I have a 2016 Wrangler JKU sport . I want to install line lock so I can lock the brakes instaed of putting all that pressure on the transmission when in park. Has anyone installed line lock (roll control) on there non Rubicon? I have line lock on my '68 Camaro so I...
Read more ..read more
Wayalife » Jeep JK Wrangler
1w ago
Hello JK Forum!!
I have an issue with my 2013 Jeep Wrangler AC Blend doors that I cannot seem to fix. I live in Texas and get to ENJOY 115 degree heat during the summer. any inconvenience with an AC is absolutely devastating.
My problem first started with the AC blend door, which had a loud and obnoxious ticking noise every time my key was put in the ignition. Turns out this was an easy fix due to this Thread here >...
Read more ..read more
Wayalife » Jeep JK Wrangler
1w ago
Hello,
This is my first post on the forum - I am in the middle of replacing my ball joints and have an issue with putting the axle back in. It was difficult to get out, but I managed. Issue now if putting it back in. I have attached a couple of pics for review, I seem to have an additional metal shield that is on the avle shaft in addition to the poly spacers and it is making it very difficult for me to puch the axle shaft in. Any feedback is appreciated
[ATTACH...
Read more ..read more
Wayalife » Jeep JK Wrangler
1w ago
So I have a 2009 Jeep Wrangler X with over 174,000 miles, and I took it in for inspection. The tech came out and said that I did not pass because both the catalyst and O2 sensor were not completed/ready. I can only have one not completed/ ready. He suggested that I drive 45-60 miles. Well, I drove 200 miles and took it in, and still the same results. Has anyone dealt with this before? I have tried resetting the ECU by disconnecting the battery, and I am putting miles on it to see if this...
Read more ..read more
Wayalife » Jeep JK Wrangler
3w ago
Wondering if JK headrests are the same size front and back? I have a used 2008 (two door), but it has no rears. I ordered a Diver Down seat cover set and the headrest covers are smaller for the rear?
Thanks ..read more
Wayalife » Jeep JK Wrangler
3w ago
Thinking about doing DV8 fenders front liners bumpers and body mount spare tire carrier. Any body have any feedback on their quality and durability?
Sent from my iPhone using WAYALIFE mobile app ..read more
Wayalife » Jeep JK Wrangler
1M ago
Anyone running an omix version of the belt tensioner assembly on their JK?
Mine is rattling like no other at 100K mi
Feeling cheap about this part, but my instinct says come up with the extra 60 bucks…
Mopar
Omix ..read more
Wayalife » Jeep JK Wrangler
1M ago
Hello Everyone,
I have a Jeep I bought used. I am going to be doing Teraflex HD Balljoints and the Teraflex Big brake kit in 3 weekends from now. I started to learn more about my jeep and how all this works. If I am to correct some issues I need to know where I sit. And I just cannot tell with confidence how much lift, and the parts it has on it. Can you help me?
Being a Rubicon It looks like stock trackbar, draglink, tie-rod. So I am looking into those parts to improve steering/tracking...
Read more ..read more
Wayalife » Jeep JK Wrangler
1M ago
Completed my PSC adventure steering kit. At full lock right, the pitman arm contacts the sway bar, I know I can adjust the steering limiter on the knuckle, but rather not. I am looking at a different sway setup. Because another issue is the passenger side disconnect, can’t disconnect. I have the pro rock 44 and the sway bracket is installed in such a way, that there is not enough room to pull the sway bar link off the pin.
Also will have to change TB. Way too close to the new big bore box...
Read more ..read more
Wayalife » Jeep JK Wrangler
2M ago
I purchased a 2008 JK a few months ago and am in the process of fixing previous owner issues. One of the things was to remove the 2" body lift as it really isn't needed for the size of tire. So to put back the shift lever to stock I removed the lift adapter and found that the shift boot was basically destroyed and a round gasket was cut. Finding the replacement shift boot was easy, but I can't identify the gasket. It was cut at the same place they cut the shift bracket. Any idea on what...
Read more ..read more