I got given a 1/10 scale redcat I think volcano, but I may be wrong. I cant post pics yet so I cant really verify what it is. Anyway I need help tuning it and have some questions. so the screw for the fuel inlet is out until its flush or does that matter how far its loosened? Where should I place the idle at first? Where do i put the other two adjuster screws as they are all the way in now where is a good place to start. I guess I need a first time startup for this car guide. Sorry if there already is one. Thanks ..read more

I'm looking for an original copy or a PDF link to a copy of instructions. If you have any original paperwork/tools that came with the engine I'd buy them. Thanks! Chris ..read more

Has anyone here every installed the Hot Racing 2 shoe aluminum clutch on a Revo 3.3? If so, what clutch nut did you use? The stock one doesnt have the groove around it for the springs to seat properly. Dont know if its not necessary, thats why or if I need to find a clutch nut with a groove for springs to seat in ..read more

Hello, I have what I believe to be a Hobao/Ofna Hyper buggy. I think it's fairly old. Not sure if it's a hyper 7, but I believe so. Anyway, I am hoping someone can help me ID the engine. I'll try to upload a pic but on the side of it is a triangle with what looks like the letters dMER, capitalized similarly, and they seem to make what looks like mountains inside a triangle shape. The buggy came with a starting box so no pull cord or roto start. The cooling head is from racers edge, I think it's aftermarket. Not sure if it is aftermarket or from this buggy. It could also be from a GS Storm swap ..read more

I have a 1/10 scale on road nitro rc. I know blue locktite taies 24hrs to fully cure. Is waiting that full 24hrs a necessity to prevent engine from moving. If anyone has experience with not waiting the full 24hrs but still having no issues with motor moving which usually results in spur gear grinding for me, can yall please let me know whats a more acceptable time besides the 24hrs, if there is one ..read more

I just unboxed recently my Losi 8eight nitro buggy with .21 dynamite engine. It almost started but i believe i pulled the pull start way too hard and pulled out the rope. Does this need to be replaced or is there a way to take it apart and re-rope the assembly ..read more

So forgive me but I am a newbie with RC trucks but I have a Tmaxx 3.3 that hasn't ran in about 10 years. I removed the EZ start glow plug wire and I'm using an igniter. I just rebuilt the carb and cleaned out all the fuel lines and everything and got it back together. After adjusting the high speed screw the truck will start but as soon as I pull off the plug igniter it dies. There is no slowly dies it's almost instantaneous. I have tried to adjust the high speed and low speed screws both directions to no avail. I noticed some "fluid" coming from the exhaust but I figured this was from the hig ..read more

Bir nitro motorum var ve onu turbo yapmak istiyorum. Daha önce yapan varsa yardım edebilir mi? Nerede turbo ve diğer malzemeleri bulmak için hiçbir fikrim yok ..read more

I have a nitro engine and I want to turbo it. If anyone has done it before, can you please help? I have no idea where to find the turbo and other materials ..read more

So I always hear its ok to skip the after run oil if your gonna use it again soon. I am curios what you all think a short time is... Days, Weeks, Months?? Can I skip using my afterrun oil if I'm not gonna run the truck again for say 2 weeks max is that ok? My truck will sit for a week or 2 max between uses. Thanks ..read more