I have an 02 ls 430 I changed the ballast on both sides and bulbs if I turn on the lights when the car is off they work as soon as I start the car they turn off when I turn the ignition off they turn back on ..read more

Hi all, I'm new here and I do apologize if this is the wrong place to post. Feel free to point me to the right one if so. I have a 2006 ES330 and I have been replacing most the bulbs with LED. Everything has been working fine until I get to the Brake lights. I purchased T20 Led bulb, red, supposed to replace 7440 and 7443 bulbs. The problem is that while they all work, the brake light on the dashboard came on. What I noticed: dash brake light came on when press brake, the rear brake lights are on dim when not pressed and brighten up when pressed, the third brake light (high mount, center, rear ..read more

The T3 series from Lasfit represents a significant leap forward compared the previous T series. Lasfit T-Series LED bulbs offer high brightness and equipped with a built-in canbus decoder, eliminating the need for additional resistors, plug and play. Many customers have used Lasfit T-Series LED bulbs and most have been highly satisfied with their performance. However, according to valuable customer feedback, there is still some room for improvement in the T-Series. We recognized the opportunity for further enhancement, and that's why the T3 series was born. Compared to the T series, the T3 se ..read more

Hello all, I recently purchased a 2001 GS 300 that was in a front end accident. I noticed that the car has mismatched headlight assemblies, the passenger side is HID and the driver's side is Halogen (which has nothing hooked up to low or high beam). However, the car has the plugs and wiring for HID. Is it possible to rewire or convert the HID plugs on the driver's side to support a halogen bulb? I'm not really worried about consistency and just need both headlights to work using the cheapest option. If not, then should I just get a new assembly with a ballast and igniter? Any help would be muc ..read more

Greetings everyone! We are thrilled to be part of this forum and share valuable information to enhance your driving experience. At Lasfit, we are committed to prioritizing user satisfaction and improving the lives of vehicle owners. Today, we are excited to introduce our latest product, the T3 series. This innovative solution has been specifically designed to tackle common issues related to turn signal lights. Increase Safety with Upgraded LED Solutions for Turn Signal Lights Dim lighting during nighttime or adverse weather conditions can pose a significant danger while driving. The origina ..read more

Hello. I wanted to replace the puddle lights on my 2019 ES 300h so I bought these these off of amazon. Should be an easy install it seems but I can't seem to get it to work. I looked on youtube for DIY's but it seems those models are not built the same and so that didn't help. On YouTube they all that covering that just plugs into the light but mine seems to have wires not protected by that covering ..read more

Hey all. Don't know if this is the right forum but I just got a 2010 lexus is250c a few months ago. I absolutely love it so far. It has the original headlights, and they're kinda ugly, so i want to get some new ones. I really like these VLAND headlights: headlights headlights . The little swoop at the bottom looks sick. The one thing I'm unsure of is that they're LED. I don't want to blind people. Bright lights at night are annoying and I don't want to make the world a worse place :). Do all LED headlights blind people? Is there a way I can adjust them? Or turn them down? Or is there a simil ..read more

I did a search but didn't find anything to answer what I am looking for. I found different brands of LED turn signal bulbs with anti-flicker built in to avoid using resistors. I bought a pair of the Lasfit bulbs but to me they seem too bright/blinding. Just looking at them blink in the dark kind of threw off my sight, so I removed them. I am concerned I will blind cars in front or rear. has anyone found a set of turn signal LED's (7440) that are not so blinding bright that have the anti-flicker built in? Thanks ..read more

I recently got pulled over for my tail lights not working so I went to looking into it and discovered that my fuse was blown I replaced the fuse it immediately blew again then I found two of the lights up front had been pulled apart so I fixed those and the fuse quit blowing for that section but now I don't have any headlights I also still do not have tail lights so I'm guessing I need a new light switch my question is will any of the other 1996 or surrounding years Lexus's interchange with that SC300 light switch. Thank you in advance for all your help ..read more

hey guys can u guys tell me which size i get for the sc ..read more