I recently went to a "tactical rifle" class, and wanted some opinions on the instructor's attitude. Dude was apparently in SWAT for a long time, did instructing, got all the awards, the whole 9 yards. During some of the instructing demos, he would clear the gun, have another instructor verify the gun was cleared, and then would often point his gun at students to demonstrate things. For example, one of them was fire a couple shots, and keep the trigger to the rear and how in his SWAT career... Gun Flagging ..read more

Anyone know of any front engine skid compatible with a front sway bar drop? I ordered a set of RCI's and was unable to install them. The front sway bar was rubbing up against the skid, not allowing me to thread in the two front bolts. After speaking with the engineering manager, he told me their skids are not compatible with the sway bar drop kit. This is no knock on RCI, they were super honest and took care of me. Any suggestions would be appreciated. I have about a 3" lift with... Engine Skid with sway bar drop ..read more

Last fall I stumbled into an '01 long-bed five-speed RWD Tundra (in Imperial Mica Jade). I had been helping someone find a new truck, and at the very last minute, they went with another Ford Ranger. I ended up with the Tundra for a pittance and decided to keep it for a little while and then pass it along. Turns out, I quite liked it and felt like it would be a good basis for a camping rig. The only... 2001 Tundra Access Cab Rebuild (part 1 ..read more

Anyone else get a weird grinding/rubbing noise coming from the back of the truck at low speeds and low rpms? Happens to me when lightly accelerating under 30mph when the rpms are in the 1200-1300 range. Was loud when pulling my 7500# travel trailer. Didn't have any issues other than that on a 1200 mile trip towing. Can't figure out where it's coming from ..read more

I got these rails that have tie down hooks attached to them. I don't know what they are called, but I don't want them. Anyone want these factory(?) things. Give me $50+shipping and I'll remove them and send them out. These are on my '21 crew max. I can't use them with my Soft Topper. If this is to much money, let me know. This is for rails and adjustable tie loops. Edit: Thanks to a member here, I was able to find out... Bed rail tie down thingies ..read more

I have a 24 Platinum Hybrid. 90% of the time it will have a jolt AFTER a complete stop, kind of like the transmission is downshifting after stopping (it's not the auto stop/start). Does anyone else experience this ..read more

EDITED: April 16, 2024 CURRENT AS OF APRIL 16, 2024​ I figured that I would help the community with an "OFFICIAL" thread of all the TSBs that are known to date. Due to past circumstances, I will not be posting any Toyota Copyrighted information...so that means no PDFs, no Screenshots of PDFs, nada, nothing, nil...and please do not ask me here or in DM/PM/Conversation. For those in Canada, the T-TCI-****-** is your equivalent... OFFICIAL: MY22+ Toyota Tundra Technical Service Bulletin Thread - Updated April 16, 2024 ..read more

So I will be replacing the radiator on my truck due to it having a slow leak. Mechanic and I both saw dried coolant near bottom of radiator. I will also be replacing thermostat, fan clutch, upper and lower radiator hoses. The thing that’s a little confusing to me is the part description for the thermostat. The only thermostat I see that would fit is “16031-0S010” which is the pn for the thermostat. However it has “without tow package” in the description but it does fit tundra, sequoia, land... Plan to replace radiator ..read more

2015 trundra w/o jbl. So! I have Kenwood stereo, hurtz front speakers also in the rear a 4ch and Audison monoblock for my hurtz 12”sub. I took the factory amp out and ran my speaker wires from there to my 4ch Can anyone give me a step by step to how to wire my audison bit ten ..read more

I swapped the engine in my 2008 Tundra and now I am getting codes P0300, P0301, P0303, P0305, P0307, and P0016. The timing chain on the replacement engine was replaced. When we first got the error codes above, we thought we were off a tooth on the timing so we took the timing chain back apart and retimed it verifying we matched everything back up properly. We have tested the VVT solenoid on the driver side and the cam shaft position sensor. When the engine first starts, it runs smoothly... Swapped motor and timing chain, now throwing codes P0300, P0301, P0303, P0305, P0307, and P0016 ..read more