వేసవిలో మీ ఎయిర్ కూలర్ను ఏ  కర్చు లేకుండా మరింత సమర్థవంతంగా  పని చేయడానికి సులభమైన మార్గం వేసవి కాలం సమీపిస్తోంది !!!! ఇప్పుడు భారతదేశంలో చాలా మంది ప్రజలు తమ ఎయిర్ కూలర్లను ప్లగ్ ఆన్ చేస్తారు, ఇది చౌకైన మరియు సమర్థవంతమైన కూలింగ్ పరిష్కారం. కొనుగోలు యొక్క ప్రారంభ వ్యయం మరియు నడవడానికి కావాల్సిన విద్యుత్ శక్తి ఖర్చు కూడా ఎయిర్ కండీషనర్ కంటే చాలా తక్కువ. తమ  ..read more

Maintaining a proper constant temperature and relative humidity always considered as an utmost important aspect for industries that are into preparing, processing and manufacturing. These requirements vary widely from process to process & product to product. Any deviation in these temperatures will cost more in terms of both productivity and energy. There are few areas where industrial cooling is used in the process area but that doesn't have any effect on the process but used to maintain comfort conditions that indirectly increases the productivity of workman. But there are many areas w ..read more

Motors consume more than 75% of industrial load across the globe. Knowingly or unknowingly huge amounts of energy is getting wasted due to the non-optimum operation of these motors. Lack of awareness can also be said as one of the important factor contributing to this non-efficient usage of motors.  When any company is planning for procuring a motor for some application, the technical manager calculates the required power and torque for the said application and decides one rating to procure say 100kW. Then it goes to the section head where he adds some margin to be on the safer side and ..read more

 ??? ????? ????: ? ???? ????????? ??? ??????????????: ? ?? ????? ?????? ???? ???? ?????????? ?????????                                     Free ?????? ????: ???????????????????? Click below for the offer page...Hurry up offer lasts till 1st April 2021 ..read more

Compressed air is one of the costliest utility in any industry. Out of 100%, electrical input energy given only around 10% will be a useful output and rest everything goes out as waste heat, noise and friction. This number is enough to think in a more focussed way to check for possible energy saving opportunities. There are many energy-saving opportunities generally like pressure reduction, leakage arresting, capacity control through speed regulation, avoiding misuse of compressed air and all that can have significant potential. Apart from these, there exists some energy-saving potential throu ..read more

  Aeroplanes generally fly at 10KM above earth's surface and at that altitude temperatures are less than -50 Degree centigrade. But still, it requires air conditioning because of the following reasons: At 10KM above earth's surface pressure is at 0.1 atm. At such low pressures, human lungs cannot perform respiration easily. So pressurisation of air is required through conditioning Air will be rammed into the jet through small openings near wings from a 1000km/hr moving aeroplane. This ramming of air causes a lot of temperature rise around 30 deg centigrade. There is a lot of solar radi ..read more

Certification of an Energy Management System will present to an organisation’s clients that the organisation has accomplished an internationally recognized standard in terms of energy management and is continuously enhancing its energy performance. Employing a Certification Body that has been accredited by an International Accreditation Body on ISO 50001 provides international recognition of the EnMS established. Accreditation is a systematic process in which a CB is audited by a third party to ensure the competence of the CB in the provision of the relevant certification process. Important ..read more

Managing carbon emissions and protecting a business from potential impacts of climate change is fundamental to achieving sustainable growth and ensuring stable shareholder returns. Most of the companies manage and report their GHG emissions in the form of GHG reports or Sustainability reports. These companies understand the significance of measurement, management and disclosure of greenhouse gas emissions in standard business practice. Emissions are generally broken down into three categories ( Scope 1, Scope 2 and Scope 3) by the Greenhouse Gas Protocol for better understanding.  Scop ..read more

ISO 50001 energy management system implementation involves many steps with a plenty number of activities involved like documentation, designing new systems and procedures, monitoring etcetera. Also, the implementation involves a lot of people holding different responsibilities. Even after rigorous cross-checking about all the activities still here and there we will be finding a few pending activities and few activities not meeting the requirements. Prioritizing the activity of preparing a self-assessment checklist will definitely be of great use in this regard. This checklist is a tool used t ..read more

Around 60% of electrical energy consumption in India is from non-Industrial sectors like Residential, Agricultural and commercial. There are robust systems in place for industries to monitor and optimise their energy consumption. But in case of residential and commercial sectors, these systems are not well placed due to n number of reasons like lack of awareness, lack of infrastructure etcetera. But there exists a lot of potential to save energy in these sectors by employing techniques as simple as just analysing their energy bill and optimising their consumption without compromising the comfo ..read more