An overview of the importance of collaboration in AEC design When BIM came to the AEC market, the intent was to prioritize intelligent orientation and information sharing during the design process. Collaboration and communication are key features of BIM and critical for the success of any AEC project. And that is why, with BIM advancements, we do have considerable software options for project collaboration for your AEC needs. One such option is BIM 360, or now Collaborate Pro. It is a tool that is particularly being developed for a more collaborative BIM approach. Design team collaboration is ..read more

As our buildings and built-environments are going more complex, our reliance on complex building systems is inevitably increasing. And therefore, clash-coordinated building system i.e., MEP coordination is a necessity to ensure streamlined functioning of your space.  It starts with extensive planning with architects and engineers to create systems that are specific to the project’s requirements and regulations. During construction, it is necessary to monitor installation to guarantee optimal performance and compliance. Industrial and commercial projects need even more thorough planning d ..read more

In the past, to ensure that concrete floors were level and flat, floor inspectors and contractors would use electronic floor profilers. Leading building experts now, however, use laser scanning—a far more precise, effective, and adaptable method. Contractors and inspectors can easily determine the exact flatness of any concrete floor thanks to laser scanning instruments, which completely comply with industry norms such as ASTM, ADA, and AISC. Laser scanning, as opposed to traditional measurement techniques, collects thorough, incredibly precise, as-built data to preserve project tolerances. U ..read more

Pertaining to the surface’s smoothness floor flatness and levelness is a measurement of how smooth or level a floor is. Floor flatness is measure of smoothness of one surface while floor levelness is about uniformity of the very same surface. It intends to be the foundation upon which the aesthetics, functionality, and longevity of a structure rest. Typically measured using a straightedge or an instrument called a levelometer, it is later compared to a specified tolerance in the building plan. Traditionally, it was measured over a 2-foot square area. It acts as the groundwork for a structure ..read more

With this comprehensive guide, discover the power of BIM for MEP design! MEP design, which combines mechanical, electrical, and plumbing components, is an essential yet difficult component of any project. While space limits in complicated or small structures represent considerable challenges, complying with rules, integrating technology seamlessly, and achieving energy efficiency are constant problems. On the other hand, there are chances for creativity when adopting sustainability, taking lifespan costs into account, and utilizing technology. The complexity and multidisciplinary character of ..read more

DC building department faces various challenges and setbacks in construction projects. Issuance of ‘Stop Work Order’ is one such challenge, which can halt construction progress, leading to delays and loss for builders and developers. Eliminating a ‘Stop Work Order in DC’ requires navigating a complex process that involves compliance with regulations set forth by the Department of Consumer and Regulatory Affairs. It also involves coordination with local government bodies such as the Department of Transportation, DC Water, and the Department of Energy and Environment. Permit expediters provide ..read more

A home has often been constructed with errors. A window intersects with a roof line, posing a risk of leaks into a second-story bedroom. This mistake is not uncommon in the construction industry but is nonetheless embarrassing and costly for the project manager. Such errors diminish profit margins, especially in times of tight financial constraints. Builders have sought a solution to prevent such costly mistakes and building information modeling (BIM) has been touted as the answer. BIM promises to reduce design flaws and change orders, enhance productivity in design and drafting, minimize mat ..read more

As-built model for facility management are crucial in maintaining a project’s lifecycle after construction has ended. Despite their importance, they are often overlooked due to the numerous steps and documents required. This article provides a comprehensive overview of as-built drawings, their creators, and their significance, along with a list of critical items to include in each drawing.  How as-built drawings help in facility management As-built drawings are a vital component in facility management across various industries. Detailed drawings set in as-built documentation assist with ..read more

Point Cloud Laser Scan to BIM Modeling – A Reality Check Laser scan to BIM is a Building Information Model, created from a 3D model scan. Detailed elements of an object are captured in physical space, enabling accurate modeling,  MEP clash coordination and quantity takeoff (QTO) or Bill of materials (BOQ). Several construction projects in the renovation and extension stages are using point cloud scan to BIM process for 3d model creation, 3d visualization, animation, and quality inspection. Scan to BIM modeling involves the technique of making a digital representation of an existing build ..read more

What is Level Of Detail – LOD BIM? Building Information Modeling (BIM) is a concept that refers to the process of producing and managing digital information about a built asset such as a building, bridge, highway, or tunnel. It gives a complete idea of the AEC project including the technical and non-technical aspects of the project. BIM has always played a vital role in the process of construction management and designing.  A model of a structure when represented digitally, it represents certain level of detail of a project. The overall condition of project’s ..read more