Donuts Racing is delighted to announce its appointment as exclusive distributor for France of the 1/8th off-road range from the emerging Italian brand WIRC. The 1/8th nitro and electric buggies are already available from the Paris-based distributor. [donutsracing_button url="https://www.donuts-racing.com/fr/130_wirc"] Before taking the decision to bring this new brand to France, we had 2 cars of each assembled by 4 of our drivers, all of different experience and skill in order to have as objective an approach as possible. Our drivers' feedback convinced us, so here they are, available from D ..read more

T-Work's have announced the release of new option parts for the Axon TC10/3 1/10th electric touring car in the form of sets of titanium turnbuckles, ball bearings, titanium and brass Hex balls, and steel and titanium screws. The turnbuckles are machined from high-quality 64 grade titanium making them stronger yet lighter than the stock turnbuckles. T-Work's offers two sets, the standard and black coated turnbuckles, both sets including nine turnbuckles and a 4mm wrench. [wartelleshop_button url="https://www.wartelle-shop.com/boutique/recherche_resultats.cfm?tri=&ordre=&triage=0&m ..read more

Following the release of inner sidewall support adaptors for 1/8th buggy, VP-Pro have introduced their new inner sidewall support adaptors intended for use with 1/10th buggy tires. The new inner sidewall support adaptors have a modified sidewall design compared to those already available. Inner sidewall support adapters are designed to stiffen the tire's sidewall, allowing you to ride with softer hardnesses without the negative effects of a soft rubber that flexes too much when driving on a high-grip track. Package includes 12-piece. [wartelleshop_button url="https://www.wartelle-shop.com/PBS ..read more

Hobbywing have introduced their new XeRun XR10 Pro WP speed controller. The new XR10 Pro-WP is able to easily handle conditions, from rain, dust, and sand with a proven waterproof and dust-proof design that is exceeds IP67 industrial standards. The ESC has built in reverse voltage protection. This ensures the ESC will be protected from accidental cross connection of the battery. [wartelleshop_button url="https://www.wartelle-shop.com/PBSCCatalog.asp?BrandID=334143&PBBrandName=HOBBYWING"] [donutsracing_button url="https://www.donuts-racing.com/fr/recherche?controller=search&orderby=pos ..read more

Horizon Hobby have announced the soon release of the new Losi AWD NASCAR 1/12th RC race cars in the ready-to-run form. With the Losi NASCAR RC Race car, you can put yourself in the driver’s seat and enjoy NASCAR action anytime — in your driveway, in a parking lot, or at your local park. Bring NASCAR racing with you almost anywhere! [wartelleshop_button url="https://www.wartelle-shop.com/boutique/recherche_resultats.cfm?tri=&ordre=&triage=0&marque_nav=20&rayon_nav=-1&gamme_nav=0&prix_min=&prix_max=&mot="] [donutsracing_button url="https://www.donuts-racing.com ..read more

ARC have introduced the new Aero front bumper intended for use with their R8.X series of 1/8th nitro and electric on-road cars. The new Aero bumper surface increases 25% and can cover the front lower end more than old one, the main difference is front edge extends 15.3mm further, it helps the body touch the bumper more forward and increase the steering response. Pre-mark 2-step bumper with different thicknesses allowed the user to cut the bumper and make more air go through the holes, more bumper hole cuts can increase steering more. The new Aero bumper is built in the same material as the li ..read more

Avid Racing have announced the release of their chassis protectors intended for use with Mugen Seiki MSB1 and XRAY XB2’24 1/10th 2WD buggies as well as the XB4‘24 1/10th 4WD buggy. Manufactured by Stickit1Racing, these chassis protectors are made from thick laminate and backed by an aggressive adhesive vinyl, making it ideal to prolong the life of the chassis as it resist against scratches and scrapes. Package includes a chassis protector as well as an extra removable tailpiece for when the first one gets worn out. [rcteam_button url="https://www.rcteam.fr/recherche?controller=search&ord ..read more

Team Associated has been at the leading edge of off-road fun for over 40 years and proud to introduce the 1:14 scale Reflex 14B 4WD electric buggy in kit form. This buggy was designed with performance in mind: the adjustability offered by the turnbuckles, springs, fluids, shock tower hole placement, gearing, and the included Factory Team parts make the Reflex 14B Kit perfect for any terrain you can throw at it. [wartelleshop_button url="https://www.wartelle-shop.com/boutique/recherche_resultats.cfm?tri=&ordre=&triage=0&marque_nav=11&rayon_nav=-1&gamme_nav=0&prix_min=&a ..read more

JConcepts is titanium with the introduction of the 3.5mm Fin turnbuckle sets designed specifically for style, durability, and performance. The base of the design is centered around a .143” (3.7mm) titanium hex size which gradually tapers down into a 3.5mm thread base design which accepts the Schumacher ball-cup after modification*. The focus of the styling surrounds the lengthened adjustment hex area and the “finned” cuts that rotate about the center. The Fin turnbuckles are lightweight, and the original design brings out the glamour and quality that makes titanium one of the most sought-afte ..read more

XRAY have introduced a new 1-piece long aluminium chassis intended for use with their XB2 1/10th buggy. This 2.5mm thick chassis is made of high quality Swiss 7075 T6 aluminium and designed to be used where longer wheel base is needed to increase stability. 1-piece chassis design with integrated kick-up optimizes weight balance and flex with its shape and chassis weight options. The chassis is universal for both Dirt and Carpet editions, fits the latest battery types, and is also suitable for XT2 1/10th 2WD stadium truck. [wartelleshop_button url="https://www.wartelle-shop.com/PBSCCatalog.asp ..read more