Aeldari Voidscarred Corsair, Part Two
Sproket's Small World
by
2M ago
Painting the Felarch As the first model of this project, the Felarch sets the overall colour palette and character for the rest of the models in the Corsair unit. This turned out to be problematic as the Felarch’s armour is quite ornate and proved to be a challenging subject for a new colour palette. However, going in at the deep end made me work a lot harder than I might have done if I’d started on a standard trooper. In the end, painting the Felarch forced me to thoroughly explore and refine my colour choices, which can only be a good thing. I’d put a lot of time into planning the colour pa ..read more
Visit website
Aeldari Voidscarred Corsairs. Part 1.
Sproket's Small World
by
3M ago
Picking a new project. I decided on my current mini painting project quite some time ago. The release of the ‘new’ Aeldari models had me hooked from the moment I saw them; and lets be honest, when it comes to Warhammer, if I’m not painting Nurgle it will probably be Elves of some kind! So, it was an easy choice when I got myself a box of Voidscarred Corsairs back in July 2022. Over the years I’ve painted many types of Eldar or Aeldari, as they are now known. Back in the ‘90’s I painted Guardians, Aspect Warriors, a Harlequin and an Incubi. In more recent times I’ve turned my hand to a Farsee ..read more
Visit website
So where have I been and what have I been up to?
Sproket's Small World
by
3M ago
Following The UK Golden Demon in 2022 I dived straight into my next project a unit of Voidscarred Corsairs. I was on a roll coming up with an overall approach to the unit and devising a colour palette. I set to, customising the first of them, which was a thoroughly enjoyable experience, but when it came to start painting everything changed.  I simply could not bear the idea of picking up a brush and painting a mini! I’ve had times when I’ve gone off painting before but never anything like this. It was a disturbing experience. In part I think it was a delayed reaction to my Nurgle tank and ..read more
Visit website
Project P30 - Part 16b
Sproket's Small World
by
2y ago
The End is Nigh - Part 2. With the exception of the base (and that’s a whole new chapter) the remaining work on my Tank is a matter of finishing things off. Some parts need to be painted from scratch but most of the work involved tying-up lose ends from earlier work. Fix the hand holding the bell into place. This was a far more straightforward process than the mecha arm. I simply glued the bell hand in place with plastic glue. Once that had set, I filled the seam with dilute PVA and then retouched the paintwork. This felt like an enormously significant step as I was finally adding the sub-as ..read more
Visit website
Project P30 - Part 13.
Sproket's Small World
by
3y ago
Ding Dong! I’m back! Not that I’ve been away as such but I decided to take a bit of a break from painting my Daemon Engine. Things had gone very well, and I’d made excellent progress, but I felt that I was beginning to get a bit too relaxed with the project. To do my best work I need to keep on my toes and I think I was getting a bit complacent. The break in painting has given me the opportunity to reset and refresh the feeling of a challenge.    To get re-started I decided to paint the bell, which I’d been keeping back for just such an occasion. The bell was perfect to paint as a ..read more
Visit website
Project P30 - Part 12
Sproket's Small World
by
3y ago
It’s time for a long overdue update! An interruption in my posting usually means that, for one reason or another, I’ve not been painting but that’s not the case this time! I’ve been happily painting away to a regular schedule and making steady progress. Quite simply when faced with a choice between painting and writing about painting I’ve opted for the former.  I’ve already written about the physical challenges presented by this model and they haven’t lessened. However I’ve now become used to handling and painting a model of this size and I’m coping quite well with this aspect of the pro ..read more
Visit website
Project P30 - Part 11
Sproket's Small World
by
3y ago
Skulls, Nurglings, Tentacles and a spot of bother with my microbeads! Since I started painting my Daemon Engine at the beginning of February, I’ve made very good progress because I’ve managed to paint for a few hours almost every day. In fact, at times, I’ve almost gotten ahead of myself. I went into the painting stage of this project with a plan, of course, but I had many different options. That’s because I’ve spent years thinking about this project so I have a lot of ideas for how I could paint it. Far more ideas than I can (or should) incorporate into one scheme!  So part of the chall ..read more
Visit website
Project P30 - Part 10
Sproket's Small World
by
3y ago
Painting skin tones in three (painfully complicated) steps!   Over the last few weeks I’ve established a good routine where I’m able to paint for a few hours every day and it feels like I’m making steady progress. There is still a lot to be resolved with regards to how I use my colour palette, but the more I get done the more developed my ideas become. I am especially happy with how well the flesh tones are coming together.    When I started painting, I thought that my plans for the flesh tones had gone out of the window in favour of something similar to what I’ve done before ..read more
Visit website
Project P30 - Part 9. Metallics, molars and monster skin.
Sproket's Small World
by
3y ago
    I’ve made a good start at establishing the flesh tones on my Demon Engine but, before I get too far into the project, I want to turn my attention to the metalics. The contrast between flesh and metal is a big part of what this model is all about. So I want to establish that contrast at an early stage. I’d decided quite some time ago that true metalics were the way to go on this project. The difference between the shiny true metalics and the flesh would add to the overall material contrasts on my model. The large size of the model lends itself to the use of true metalics as there ..read more
Visit website
Project P30 - Part 8. Lets get the painting started!
Sproket's Small World
by
4y ago
I wondered if I’d ever get to this stage but, at long last, I’m painting my Demon Tank! However, before the ‘fun’ could start, there was one last little bit of preparation to be done. I had to wash the model prior to priming it. This was to remove any grease and dust that had built up during the construction of the model. It’s essential to have a clean surface before you apply any paint. I first masked off the belly-mouth and then set to with an electric toothbrush and dish soap. Once I’d given the model a careful scrub, I gently rinsed it off under cool running water. This was a terrifying ..read more
Visit website

Follow Sproket's Small World on FeedSpot

Continue with Google
Continue with Apple
OR